dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: Yuti Amonkar <yamonkar@cadence.com>,
	<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
	<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
	<maxime@cerno.tech>, <airlied@linux.ie>, <daniel@ffwll.ch>,
	<mark.rutland@arm.com>, <a.hajda@samsung.com>,
	<narmstrong@baylibre.com>, <Laurent.pinchart@ideasonboard.com>,
	<jonas@kwiboo.se>, <jernej.skrabec@siol.net>
Cc: praneeth@ti.com, mparab@cadence.com, tomi.valkeinen@ti.com,
	sjakhade@cadence.com
Subject: Re: [PATCH v4 3/3] drm: bridge: cdns-mhdp: add j721e wrapper
Date: Mon, 24 Feb 2020 21:55:39 +0200	[thread overview]
Message-ID: <9b85c5d5-d226-5fa4-a685-b360a71c5036@ti.com> (raw)
In-Reply-To: <1580970588-21596-4-git-send-email-yamonkar@cadence.com>

On 06/02/2020 08:29, Yuti Amonkar wrote:
> Add j721e wrapper for mhdp, which sets up the clock and data muxes.
> 
> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
> ---
>  drivers/gpu/drm/bridge/Kconfig           | 12 ++++
>  drivers/gpu/drm/bridge/Makefile          |  3 +
>  drivers/gpu/drm/bridge/cdns-mhdp-core.c  | 14 +++++
>  drivers/gpu/drm/bridge/cdns-mhdp-core.h  |  1 +
>  drivers/gpu/drm/bridge/cdns-mhdp-j721e.c | 79 ++++++++++++++++++++++++
>  drivers/gpu/drm/bridge/cdns-mhdp-j721e.h | 55 +++++++++++++++++
>  6 files changed, 164 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
>  create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index c66f2ef04f71..32e3bc5edae8 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -38,6 +38,18 @@ config DRM_CDNS_MHDP
>  	  It takes a DPI stream as input and output it encoded
>  	  in DP format.
>  
> +if DRM_CDNS_MHDP
> +
> +config DRM_CDNS_MHDP_J721E
> +	bool "J721E Cadence DPI/DP wrapper support"
> +	default y
> +	help
> +	  Support J721E Cadence DPI/DP wrapper. This is a wrapper
> +	  which adds support for J721E related platform ops. It
> +	  initializes the J721e Display Port and sets up the
> +	  clock and data muxes.
> +endif
> +
>  config DRM_DUMB_VGA_DAC
>  	tristate "Dumb VGA DAC Bridge support"
>  	depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 71019088d257..7e6c64f9021f 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -21,3 +21,6 @@ obj-y += analogix/
>  obj-y += synopsys/
>  
>  cdns-mhdp-objs := cdns-mhdp-core.o
> +ifeq ($(CONFIG_DRM_CDNS_MHDP_J721E),y)
> +	cdns-mhdp-objs += cdns-mhdp-j721e.o
> +endif
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.c b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> index 51ed9cdee161..8483b6b1023b 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> @@ -36,8 +36,22 @@
>  
>  #include "cdns-mhdp-core.h"
>  
> +#include "cdns-mhdp-j721e.h"
> +
> +#ifdef CONFIG_DRM_CDNS_MHDP_J721E
> +static const struct mhdp_platform_ops mhdp_ti_j721e_ops = {
> +	.init = cdns_mhdp_j721e_init,
> +	.exit = cdns_mhdp_j721e_fini,
> +	.enable = cdns_mhdp_j721e_enable,
> +	.disable = cdns_mhdp_j721e_disable,
> +};
> +#endif
> +
>  static const struct of_device_id mhdp_ids[] = {
>  	{ .compatible = "cdns,mhdp8546", },
> +#ifdef CONFIG_DRM_CDNS_MHDP_J721E
> +	{ .compatible = "ti,j721e-mhdp8546", .data = &mhdp_ti_j721e_ops },
> +#endif
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mhdp_ids);
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.h b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> index 2f3b67987832..67a99eab5db3 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> @@ -335,6 +335,7 @@ struct mhdp_platform_ops {
>  
>  struct cdns_mhdp_device {
>  	void __iomem *regs;
> +	void __iomem *j721e_regs;
>  
>  	struct device *dev;
>  	struct clk *clk;
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> new file mode 100644
> index 000000000000..a87faf55c065
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsarha@ti.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/io.h>
> +
> +#include "cdns-mhdp-j721e.h"
> +
> +#define	REVISION			0x00
> +#define	DPTX_IPCFG			0x04
> +#define	ECC_MEM_CFG			0x08
> +#define	DPTX_DSC_CFG			0x0c
> +#define	DPTX_SRC_CFG			0x10
> +#define	DPTX_VIF_SECURE_MODE_CFG	0x14
> +#define	DPTX_VIF_CONN_STATUS		0x18
> +#define	PHY_CLK_STATUS			0x1c
> +
> +#define DPTX_SRC_AIF_EN			BIT(16)
> +#define DPTX_SRC_VIF_3_IN30B		BIT(11)
> +#define DPTX_SRC_VIF_2_IN30B		BIT(10)
> +#define DPTX_SRC_VIF_1_IN30B		BIT(9)
> +#define DPTX_SRC_VIF_0_IN30B		BIT(8)
> +#define DPTX_SRC_VIF_3_SEL_DPI5		BIT(7)
> +#define DPTX_SRC_VIF_3_SEL_DPI3		0
> +#define DPTX_SRC_VIF_2_SEL_DPI4		BIT(6)
> +#define DPTX_SRC_VIF_2_SEL_DPI2		0
> +#define DPTX_SRC_VIF_1_SEL_DPI3		BIT(5)
> +#define DPTX_SRC_VIF_1_SEL_DPI1		0
> +#define DPTX_SRC_VIF_0_SEL_DPI2		BIT(4)
> +#define DPTX_SRC_VIF_0_SEL_DPI0		0
> +#define DPTX_SRC_VIF_3_EN		BIT(3)
> +#define DPTX_SRC_VIF_2_EN		BIT(2)
> +#define DPTX_SRC_VIF_1_EN		BIT(1)
> +#define DPTX_SRC_VIF_0_EN		BIT(0)
> +
> +/* TODO turn DPTX_IPCFG fw_mem_clk_en at pm_runtime_suspend. */
> +
> +int cdns_mhdp_j721e_init(struct cdns_mhdp_device *mhdp)
> +{
> +	struct platform_device *pdev = to_platform_device(mhdp->dev);
> +	struct resource *regs;
> +
> +	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	mhdp->j721e_regs = devm_ioremap_resource(&pdev->dev, regs);
> +	if (IS_ERR(mhdp->j721e_regs))
> +		return PTR_ERR(mhdp->j721e_regs);
> +
> +	return 0;
> +}
> +
> +void cdns_mhdp_j721e_fini(struct cdns_mhdp_device *mhdp)
> +{
> +}
> +
> +void cdns_mhdp_j721e_enable(struct cdns_mhdp_device *mhdp)
> +{
> +	/*
> +	 * Eneble VIF_0 and select DPI2 as its input. DSS0 DPI0 is connected
> +	 * to eDP DPI2. This is the only supported SST configuration on
> +	 * J721E.
> +	 */
> +	writel(DPTX_SRC_VIF_0_EN | DPTX_SRC_VIF_0_SEL_DPI2,
> +	       mhdp->j721e_regs + DPTX_SRC_CFG);
> +}
> +
> +void cdns_mhdp_j721e_disable(struct cdns_mhdp_device *mhdp)
> +{
> +	/* Put everything to defaults  */
> +	writel(0, mhdp->j721e_regs + DPTX_DSC_CFG);
> +}
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> new file mode 100644
> index 000000000000..de0e4e82b58c
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> @@ -0,0 +1,55 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsarha@ti.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef CDNS_MHDP_J721E_H
> +#define CDNS_MHDP_J721E_H
> +
> +#include <linux/platform_device.h>
> +#include "cdns-mhdp-core.h"
> +
> +struct cdns_mhdp_j721e_wrap;
> +
> +#ifdef CONFIG_DRM_CDNS_MHDP_J721E
> +
> +int cdns_mhdp_j721e_init(struct cdns_mhdp_device *mhdp);
> +
> +void cdns_mhdp_j721e_fini(struct cdns_mhdp_device *mhdp);
> +
> +void cdns_mhdp_j721e_enable(struct cdns_mhdp_device *mhdp);
> +
> +void cdns_mhdp_j721e_disable(struct cdns_mhdp_device *mhdp);
> +
> +#else
> +
> +static inline
> +int cdns_mhdp_j721e_init(struct cdns_mhdp_device *mhdp)
> +{
> +	return 0;
> +}
> +
> +static inline
> +void cdns_mhdp_j721e_fini(struct cdns_mhdp_device *mhdp)
> +{
> +}
> +
> +static inline
> +void cdns_mhdp_j721e_sst_enable(struct cdns_mhdp_device *mhdp);
                                                                 ^
The semicolon must be removed.

BR,
Jyri

> +{
> +}
> +
> +static inline
> +void cdns_mhdp_j721e_sst_disable(struct cdns_mhdp_device *mhdp)
> +{
> +}
> +#endif /* CONFIG_DRM_CDNS_MHDP_J721E */
> +
> +#endif /* !CDNS_MHDP_J721E_H */
> 


-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-02-24 19:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-06  6:29 [PATCH v4 0/3] drm: Add support for Cadence MHDP DPI/DP bridge and J721E wrapper Yuti Amonkar
2020-02-06  6:29 ` [PATCH v4 1/3] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings Yuti Amonkar
2020-02-06  6:29 ` [PATCH v4 2/3] drm: bridge: Add support for Cadence MHDP DPI/DP bridge Yuti Amonkar
2020-02-06  6:29 ` [PATCH v4 3/3] drm: bridge: cdns-mhdp: add j721e wrapper Yuti Amonkar
2020-02-24 19:55   ` Jyri Sarha [this message]
2020-02-10  7:29 ` [PATCH v4 0/3] drm: Add support for Cadence MHDP DPI/DP bridge and J721E wrapper Jyri Sarha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9b85c5d5-d226-5fa4-a685-b360a71c5036@ti.com \
    --to=jsarha@ti.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=mparab@cadence.com \
    --cc=narmstrong@baylibre.com \
    --cc=praneeth@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sjakhade@cadence.com \
    --cc=tomi.valkeinen@ti.com \
    --cc=yamonkar@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).