From: Rob Clark <robdclark@gmail.com>
To: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>,
Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
DRI Development <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 4/6] drm/crtc: Polish kerneldoc
Date: Wed, 19 Nov 2014 15:28:29 -0500 [thread overview]
Message-ID: <CAF6AEGt=rb3KGcRVfHM7L8xcwfTMP_AicUhEasKcw8R9JGw-UA@mail.gmail.com> (raw)
In-Reply-To: <1416418691-24747-4-git-send-email-daniel.vetter@ffwll.ch>
On Wed, Nov 19, 2014 at 12:38 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> - Make it clear that it's a negative errno (more in line with
> everything else).
> - Clean up the confusion around get_properties vs. getproperty ioctls:
> One reads per-obj property values, the other reads property
> metadata.
>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 79 ++++++++++++++++++++++++----------------------
> 1 file changed, 41 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 5c878f172365..8c550302a9ef 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -1490,7 +1490,7 @@ EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
> * connectors.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
> {
> @@ -1674,7 +1674,7 @@ static void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out,
> * the caller.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> static int drm_crtc_convert_umode(struct drm_display_mode *out,
> const struct drm_mode_modeinfo *in)
> @@ -1717,7 +1717,7 @@ static int drm_crtc_convert_umode(struct drm_display_mode *out,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getresources(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -1905,7 +1905,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getcrtc(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -1966,7 +1966,7 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getconnector(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2110,7 +2110,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getencoder(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2151,7 +2151,7 @@ int drm_mode_getencoder(struct drm_device *dev, void *data,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getplane_res(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2212,7 +2212,7 @@ int drm_mode_getplane_res(struct drm_device *dev, void *data,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getplane(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2386,7 +2386,7 @@ static int setplane_internal(struct drm_plane *plane,
> * valid crtc).
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_setplane(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2461,7 +2461,7 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
> * interface. The only thing it adds is correct refcounting dance.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_set_config_internal(struct drm_mode_set *set)
> {
> @@ -2554,7 +2554,7 @@ EXPORT_SYMBOL(drm_crtc_check_viewport);
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_setcrtc(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -2717,7 +2717,7 @@ out:
> * userspace wants to make use of these capabilities.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> static int drm_mode_cursor_universal(struct drm_crtc *crtc,
> struct drm_mode_cursor2 *req,
> @@ -2865,7 +2865,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_cursor_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -2892,7 +2892,7 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_cursor2_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -2956,7 +2956,7 @@ EXPORT_SYMBOL(drm_mode_legacy_fb_format);
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_addfb(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3161,7 +3161,7 @@ static struct drm_framebuffer *add_framebuffer_internal(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_addfb2(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3189,7 +3189,7 @@ int drm_mode_addfb2(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_rmfb(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3243,7 +3243,7 @@ fail_lookup:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getfb(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3304,7 +3304,7 @@ int drm_mode_getfb(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3384,7 +3384,7 @@ out_err1:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> void drm_fb_release(struct drm_file *priv)
> {
> @@ -3818,17 +3818,20 @@ int drm_object_property_get_value(struct drm_mode_object *obj,
> EXPORT_SYMBOL(drm_object_property_get_value);
>
> /**
> - * drm_mode_getproperty_ioctl - get the current value of a connector's property
> + * drm_mode_getproperty_ioctl - get the property metadata
> * @dev: DRM device
> * @data: ioctl data
> * @file_priv: DRM file info
> *
> - * This function retrieves the current value for an connectors's property.
> + * This function retrieves the metadata for a given property, like the different
> + * possible values for an enum property or the limits for a range property.
> + *
> + * Blob properties are special
> *
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getproperty_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -3981,7 +3984,7 @@ static void drm_property_destroy_blob(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_getblob_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4026,7 +4029,7 @@ done:
> * them more meaningful names.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_connector_set_path_property(struct drm_connector *connector,
> const char *path)
> @@ -4056,7 +4059,7 @@ EXPORT_SYMBOL(drm_mode_connector_set_path_property);
> * connector's edid property.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_connector_update_edid_property(struct drm_connector *connector,
> const struct edid *edid)
> @@ -4153,7 +4156,7 @@ static bool drm_property_change_is_valid(struct drm_property *property,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4236,7 +4239,7 @@ int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
> EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
>
> /**
> - * drm_mode_getproperty_ioctl - get the current value of a object's property
> + * drm_mode_obj_get_properties_ioctl - get the current value of a object's property
> * @dev: DRM device
> * @data: ioctl data
> * @file_priv: DRM file info
> @@ -4248,7 +4251,7 @@ EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -4320,7 +4323,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
> struct drm_file *file_priv)
> @@ -4392,7 +4395,7 @@ out:
> * possible_clones and possible_crtcs bitmasks.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_connector_attach_encoder(struct drm_connector *connector,
> struct drm_encoder *encoder)
> @@ -4419,7 +4422,7 @@ EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
> * fixed gamma table size.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
> int gamma_size)
> @@ -4448,7 +4451,7 @@ EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_gamma_set_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4520,7 +4523,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_gamma_get_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4586,7 +4589,7 @@ out:
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_page_flip_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4752,7 +4755,7 @@ EXPORT_SYMBOL(drm_mode_config_reset);
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_create_dumb_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4804,7 +4807,7 @@ int drm_mode_create_dumb_ioctl(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> @@ -4831,7 +4834,7 @@ int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
> * Called by the user via ioctl.
> *
> * Returns:
> - * Zero on success, errno on failure.
> + * Zero on success, negative errno on failure.
> */
> int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv)
> --
> 2.1.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-11-19 20:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 17:38 [PATCH 1/6] drm/atomic: Ensure that drm_connector_index is stable Daniel Vetter
2014-11-19 17:38 ` [PATCH 2/6] drm/atomic: Only destroy connector states with connection mutex held Daniel Vetter
2014-11-19 20:22 ` [Intel-gfx] " Rob Clark
2014-11-19 17:38 ` [PATCH 3/6] drm/atomic: Don't overrun the connector array when hotplugging Daniel Vetter
2014-11-19 20:24 ` Rob Clark
2014-11-20 8:53 ` Thierry Reding
2014-11-19 17:38 ` [PATCH 4/6] drm/crtc: Polish kerneldoc Daniel Vetter
2014-11-19 20:28 ` Rob Clark [this message]
2014-11-19 17:38 ` [PATCH 5/6] drm: s/enum_blob_list/enum_list/ in drm_property Daniel Vetter
2014-11-19 20:25 ` Rob Clark
2014-11-19 17:38 ` [PATCH 6/6] drm/atomic_helper: Make it clear that commit_planes gets the old state Daniel Vetter
2014-11-19 20:29 ` Rob Clark
2014-11-19 20:55 ` Daniel Vetter
2014-11-19 20:21 ` [Intel-gfx] [PATCH 1/6] drm/atomic: Ensure that drm_connector_index is stable Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAF6AEGt=rb3KGcRVfHM7L8xcwfTMP_AicUhEasKcw8R9JGw-UA@mail.gmail.com' \
--to=robdclark@gmail.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).