From: Robert Foss <robert.foss@linaro.org>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Neil Armstrong <narmstrong@baylibre.com>,
David Airlie <airlied@linux.ie>, Jonas Karlman <jonas@kwiboo.se>,
linux-kernel <linux-kernel@vger.kernel.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Sam Ravnborg <sam@ravnborg.org>, Xin Ji <xji@analogixsemi.com>
Subject: Re: [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off
Date: Tue, 23 Feb 2021 16:23:10 +0100 [thread overview]
Message-ID: <CAG3jFytPDLWygTGeyCYEqJYcwD=UDAe6hagL5zTjrSKXoN5aMA@mail.gmail.com> (raw)
In-Reply-To: <20210115070250.2271571-2-hsinyi@chromium.org>
Hey Hsin-Yi,
This patch looks good to me, feel free to add my r-b.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
On Fri, 15 Jan 2021 at 08:05, Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> When suspending the driver, anx7625_power_standby() will be called to
> turn off reset-gpios and enable-gpios. However, power supplies are not
> disabled. To save power, the driver can get the power supply regulators
> and turn off them in anx7625_power_standby().
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> Change:
> v3: add delays between regulators power on
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/anx7625.h | 1 +
> 2 files changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 65cc05982f82..23283ba0c4f9 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -11,6 +11,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> #include <linux/workqueue.h>
> @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
> static void anx7625_power_on(struct anx7625_data *ctx)
> {
> struct device *dev = &ctx->client->dev;
> + int ret, i;
>
> if (!ctx->pdata.low_power_mode) {
> DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> return;
> }
>
> + for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
> + ret = regulator_enable(ctx->pdata.supplies[i].consumer);
> + if (ret < 0) {
> + DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
> + i, ret);
> + goto reg_err;
> + }
> + usleep_range(2000, 2100);
> + }
> +
> + usleep_range(4000, 4100);
> +
> /* Power on pin enable */
> gpiod_set_value(ctx->pdata.gpio_p_on, 1);
> usleep_range(10000, 11000);
> @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
> usleep_range(10000, 11000);
>
> DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
> + return;
> +reg_err:
> + for (--i; i >= 0; i--)
> + regulator_disable(ctx->pdata.supplies[i].consumer);
> }
>
> static void anx7625_power_standby(struct anx7625_data *ctx)
> {
> struct device *dev = &ctx->client->dev;
> + int ret;
>
> if (!ctx->pdata.low_power_mode) {
> DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
> usleep_range(1000, 1100);
> gpiod_set_value(ctx->pdata.gpio_p_on, 0);
> usleep_range(1000, 1100);
> +
> + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
> + ctx->pdata.supplies);
> + if (ret < 0)
> + DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
> +
> DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
> }
>
> @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> platform->client = client;
> i2c_set_clientdata(client, platform);
>
> + pdata->supplies[0].supply = "vdd10";
> + pdata->supplies[1].supply = "vdd18";
> + pdata->supplies[2].supply = "vdd33";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
> + pdata->supplies);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
> + return ret;
> + }
> anx7625_init_gpio(platform);
>
> atomic_set(&platform->power_status, 0);
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 193ad86c5450..e4a086b3a3d7 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -350,6 +350,7 @@ struct s_edid_data {
> struct anx7625_platform_data {
> struct gpio_desc *gpio_p_on;
> struct gpio_desc *gpio_reset;
> + struct regulator_bulk_data supplies[3];
> struct drm_bridge *panel_bridge;
> int intp_irq;
> u32 low_power_mode;
> --
> 2.30.0.284.gd98b1dd5eaa7-goog
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
prev parent reply other threads:[~2021-02-23 15:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 7:02 [PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies Hsin-Yi Wang
2021-01-15 7:02 ` [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off Hsin-Yi Wang
2021-02-23 15:23 ` Robert Foss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAG3jFytPDLWygTGeyCYEqJYcwD=UDAe6hagL5zTjrSKXoN5aMA@mail.gmail.com' \
--to=robert.foss@linaro.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hsinyi@chromium.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=xji@analogixsemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).