dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Vinay Simha B N <simhavcs@gmail.com>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>, David Airlie <airlied@linux.ie>,
	open list <linux-kernel@vger.kernel.org>,
	"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
	Rob Herring <robh+dt@kernel.org>, Sam Ravnborg <sam@ravnborg.org>
Subject: Re: [PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings
Date: Wed, 29 Jul 2020 18:01:21 +0530	[thread overview]
Message-ID: <CAGWqDJ74bveHPKXqdPhwbZjb=cXPPQLTEng4oi+dkZa-1fRz_Q@mail.gmail.com> (raw)
In-Reply-To: <1594388491-15129-1-git-send-email-simhavcs@gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 8037 bytes --]

Hi All,

Please Review the patch

On Fri, Jul 10, 2020 at 7:11 PM Vinay Simha BN <simhavcs@gmail.com> wrote:

> - license modified to (GPL-2.0-only OR BSD-2-Clause)
> - single-link and dual-link lvds description and
>   examples are added
> - proper indentation
> - VESA/JEIDA formats picked from panel-lvds dts
> - dsi data-lanes property removed, it will be picked
>   from dsi0 ports
> - dual-link lvds port added and implemented
> - converted from .txt to .yaml
>
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v1:
>  Initial version wast .txt file
>
> v2:
>  From txt to yaml file format
>
> v3:
> * Andrzej Hajda review comments incorporated
>   dual port lvds implemented
>
> * Laurent Pinchart review comments incorporated
>   dsi lanes property removed and it is dynamically
>   picked from the dsi ports
>   VESA/JEIDA format picked from panel-lvds dts
>
> v4:
> * Sam Ravnborg review comments incorporated
>   }' is indented properly in examples data-lanes
>   description for single-link and dual-link lvds
>
> v5:
> * Sam Ravnborg review comments incorporated
>   license modified to (GPL-2.0-only OR BSD-2-Clause)
>   changelog added
>
> v6:
> * No changes, revision version mentioned to inline with
>   driver file
>
> v7:
> * change log added
>   Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
>
> v8:
> * Reviewed-by: Rob Herring <robh@kernel.org>
> * change log modified in reverse chronological order
> ---
>  .../bindings/display/bridge/toshiba,tc358775.yaml  | 215
> +++++++++++++++++++++
>  1 file changed, 215 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> new file mode 100644
> index 0000000..31f085d
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> @@ -0,0 +1,215 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358775 DSI to LVDS bridge bindings
> +
> +maintainers:
> + - Vinay Simha BN <simhavcs@gmail.com>
> +
> +description: |
> + This binding supports DSI to LVDS bridge TC358775
> +
> + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
> + Video frame size:
> + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display
> panel
> + limited by 135 MHz LVDS speed
> + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS
> display
> + panel, limited by 270 MHz LVDS speed.
> +
> +properties:
> +  compatible:
> +    const: toshiba,tc358775
> +
> +  reg:
> +    maxItems: 1
> +    description: i2c address of the bridge, 0x0f
> +
> +  vdd-supply:
> +    maxItems: 1
> +    description:  1.2V LVDS Power Supply
> +
> +  vddio-supply:
> +    maxItems: 1
> +    description: 1.8V IO Power Supply
> +
> +  stby-gpios:
> +    maxItems: 1
> +    description: Standby pin, Low active
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Hardware reset, Low active
> +
> +  ports:
> +    type: object
> +    description:
> +      A node containing input and output port nodes with endpoint
> definitions
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        description: |
> +          DSI Input. The remote endpoint phandle should be a
> +          reference to a valid mipi_dsi_host device node.
> +
> +      port@1:
> +        type: object
> +        description: |
> +          Video port for LVDS output (panel or connector).
> +
> +      port@2:
> +        type: object
> +        description: |
> +          Video port for Dual link LVDS output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> + - vddio-supply
> + - stby-gpios
> + - reset-gpios
> + - ports
> +
> +examples:
> + - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    /* For single-link LVDS display panel */
> +
> +    i2c@78b8000 {
> +        /* On High speed expansion */
> +        label = "HS-I2C2";
> +        reg = <0x078b8000 0x500>;
> +        clock-frequency = <400000>; /* fastmode operation */
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        tc_bridge: bridge@f {
> +            compatible = "toshiba,tc358775";
> +            reg = <0x0f>;
> +
> +            vdd-supply = <&pm8916_l2>;
> +            vddio-supply = <&pm8916_l6>;
> +
> +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    d2l_in_test: endpoint {
> +                        remote-endpoint = <&dsi0_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    lvds_out: endpoint {
> +                        remote-endpoint = <&panel_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +
> +    dsi@1a98000 {
> +        reg = <0x1a98000 0x25c>;
> +        reg-names = "dsi_ctrl";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out: endpoint {
> +                    remote-endpoint = <&d2l_in_test>;
> +                    data-lanes = <0 1 2 3>;
> +                };
> +             };
> +         };
> +     };
> +
> + - |
> +    /* For dual-link LVDS display panel */
> +
> +    i2c@78b8000 {
> +        /* On High speed expansion */
> +        label = "HS-I2C2";
> +        reg = <0x078b8000 0x500>;
> +        clock-frequency = <400000>; /* fastmode operation */
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        tc_bridge_dual: bridge@f {
> +            compatible = "toshiba,tc358775";
> +            reg = <0x0f>;
> +
> +            vdd-supply = <&pm8916_l2>;
> +            vddio-supply = <&pm8916_l6>;
> +
> +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    d2l_in_dual: endpoint {
> +                        remote-endpoint = <&dsi0_out_dual>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    lvds0_out: endpoint {
> +                        remote-endpoint = <&panel_in0>;
> +                    };
> +                };
> +
> +                port@2 {
> +                    reg = <2>;
> +                    lvds1_out: endpoint {
> +                        remote-endpoint = <&panel_in1>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +
> +    dsi@1a98000 {
> +        reg = <0x1a98000 0x25c>;
> +        reg-names = "dsi_ctrl";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out_dual: endpoint {
> +                    remote-endpoint = <&d2l_in_dual>;
> +                    data-lanes = <0 1 2 3>;
> +                };
> +             };
> +         };
> +     };
> +...
> --
> 2.1.2
>
>

-- 
regards,
vinaysimha

[-- Attachment #1.2: Type: text/html, Size: 11054 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-07-30  7:17 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 13:41 [PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings Vinay Simha BN
2020-07-10 13:41 ` [PATCH v8 2/2] display/drm/bridge: TC358775 DSI/LVDS driver Vinay Simha BN
2020-07-29 12:31   ` Vinay Simha B N
2020-08-07 12:52     ` Vinay Simha B N
2020-08-08 21:30       ` Laurent Pinchart
2020-08-10 17:54         ` Sam Ravnborg
2020-08-11 10:19           ` Laurent Pinchart
2020-08-11 19:17             ` Sam Ravnborg
2020-08-12  2:20               ` Vinay Simha B N
2020-08-12  7:36                 ` Vinay Simha B N
2020-07-29 12:31 ` Vinay Simha B N [this message]
2020-08-07 12:52   ` [PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings Vinay Simha B N
2020-08-10 17:38   ` Sam Ravnborg
2020-08-12  2:18     ` Vinay Simha B N

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGWqDJ74bveHPKXqdPhwbZjb=cXPPQLTEng4oi+dkZa-1fRz_Q@mail.gmail.com' \
    --to=simhavcs@gmail.com \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).