Re: [PATCH v4 2/2] drm/lima: Add optional devfreq and cooling device support

[Qiang Yu <yuq825@gmail.com>]

Looks good for me, patch is:
Reviewed-by: Qiang Yu <yuq825@gmail.com>

Regards,
Qiang

On Fri, Mar 20, 2020 at 4:35 AM Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Most platforms with a Mali-400 or Mali-450 GPU also have support for
> changing the GPU clock frequency. Add devfreq support so the GPU clock
> rate is updated based on the actual GPU usage when the
> "operating-points-v2" property is present in the board.dts.
>
> The actual devfreq code is taken from panfrost_devfreq.c and modified so
> it matches what the lima hardware needs:
> - a call to dev_pm_opp_set_clkname() during initialization because there
>   are two clocks on Mali-4x0 IPs. "core" is the one that actually clocks
>   the GPU so we need to control it using devfreq.
> - locking when reading or writing the devfreq statistics because (unlike
>   than panfrost) we have multiple PP and GP IRQs which may finish jobs
>   concurrently.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/gpu/drm/lima/Kconfig        |   2 +
>  drivers/gpu/drm/lima/Makefile       |   3 +-
>  drivers/gpu/drm/lima/lima_devfreq.c | 234 ++++++++++++++++++++++++++++
>  drivers/gpu/drm/lima/lima_devfreq.h |  41 +++++
>  drivers/gpu/drm/lima/lima_device.c  |   4 +
>  drivers/gpu/drm/lima/lima_device.h  |   3 +
>  drivers/gpu/drm/lima/lima_drv.c     |  14 +-
>  drivers/gpu/drm/lima/lima_sched.c   |   7 +
>  drivers/gpu/drm/lima/lima_sched.h   |   3 +
>  9 files changed, 308 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/lima/lima_devfreq.c
>  create mode 100644 drivers/gpu/drm/lima/lima_devfreq.h
>
> diff --git a/drivers/gpu/drm/lima/Kconfig b/drivers/gpu/drm/lima/Kconfig
> index d589f09d04d9..fa1d4f5df31e 100644
> --- a/drivers/gpu/drm/lima/Kconfig
> +++ b/drivers/gpu/drm/lima/Kconfig
> @@ -10,5 +10,7 @@ config DRM_LIMA
>         depends on OF
>         select DRM_SCHED
>         select DRM_GEM_SHMEM_HELPER
> +       select PM_DEVFREQ
> +       select DEVFREQ_GOV_SIMPLE_ONDEMAND
>         help
>          DRM driver for ARM Mali 400/450 GPUs.
> diff --git a/drivers/gpu/drm/lima/Makefile b/drivers/gpu/drm/lima/Makefile
> index a85444b0a1d4..5e5c29875e9c 100644
> --- a/drivers/gpu/drm/lima/Makefile
> +++ b/drivers/gpu/drm/lima/Makefile
> @@ -14,6 +14,7 @@ lima-y := \
>         lima_sched.o \
>         lima_ctx.o \
>         lima_dlbu.o \
> -       lima_bcast.o
> +       lima_bcast.o \
> +       lima_devfreq.o
>
>  obj-$(CONFIG_DRM_LIMA) += lima.o
> diff --git a/drivers/gpu/drm/lima/lima_devfreq.c b/drivers/gpu/drm/lima/lima_devfreq.c
> new file mode 100644
> index 000000000000..8c4d21d07529
> --- /dev/null
> +++ b/drivers/gpu/drm/lima/lima_devfreq.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> + *
> + * Based on panfrost_devfreq.c:
> + *   Copyright 2019 Collabora ltd.
> + */
> +#include <linux/clk.h>
> +#include <linux/devfreq.h>
> +#include <linux/devfreq_cooling.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_opp.h>
> +#include <linux/property.h>
> +
> +#include "lima_device.h"
> +#include "lima_devfreq.h"
> +
> +static void lima_devfreq_update_utilization(struct lima_devfreq *devfreq)
> +{
> +       ktime_t now, last;
> +
> +       now = ktime_get();
> +       last = devfreq->time_last_update;
> +
> +       if (devfreq->busy_count > 0)
> +               devfreq->busy_time += ktime_sub(now, last);
> +       else
> +               devfreq->idle_time += ktime_sub(now, last);
> +
> +       devfreq->time_last_update = now;
> +}
> +
> +static int lima_devfreq_target(struct device *dev, unsigned long *freq,
> +                              u32 flags)
> +{
> +       struct dev_pm_opp *opp;
> +       int err;
> +
> +       opp = devfreq_recommended_opp(dev, freq, flags);
> +       if (IS_ERR(opp))
> +               return PTR_ERR(opp);
> +       dev_pm_opp_put(opp);
> +
> +       err = dev_pm_opp_set_rate(dev, *freq);
> +       if (err)
> +               return err;
> +
> +       return 0;
> +}
> +
> +static void lima_devfreq_reset(struct lima_devfreq *devfreq)
> +{
> +       devfreq->busy_time = 0;
> +       devfreq->idle_time = 0;
> +       devfreq->time_last_update = ktime_get();
> +}
> +
> +static int lima_devfreq_get_dev_status(struct device *dev,
> +                                      struct devfreq_dev_status *status)
> +{
> +       struct lima_device *ldev = dev_get_drvdata(dev);
> +       struct lima_devfreq *devfreq = &ldev->devfreq;
> +       unsigned long irqflags;
> +
> +       status->current_frequency = clk_get_rate(ldev->clk_gpu);
> +
> +       spin_lock_irqsave(&devfreq->lock, irqflags);
> +
> +       lima_devfreq_update_utilization(devfreq);
> +
> +       status->total_time = ktime_to_ns(ktime_add(devfreq->busy_time,
> +                                                  devfreq->idle_time));
> +       status->busy_time = ktime_to_ns(devfreq->busy_time);
> +
> +       lima_devfreq_reset(devfreq);
> +
> +       spin_unlock_irqrestore(&devfreq->lock, irqflags);
> +
> +       dev_dbg(ldev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n",
> +               status->busy_time, status->total_time,
> +               status->busy_time / (status->total_time / 100),
> +               status->current_frequency / 1000 / 1000);
> +
> +       return 0;
> +}
> +
> +static struct devfreq_dev_profile lima_devfreq_profile = {
> +       .polling_ms = 50, /* ~3 frames */
> +       .target = lima_devfreq_target,
> +       .get_dev_status = lima_devfreq_get_dev_status,
> +};
> +
> +void lima_devfreq_fini(struct lima_device *ldev)
> +{
> +       struct lima_devfreq *devfreq = &ldev->devfreq;
> +
> +       if (devfreq->cooling) {
> +               devfreq_cooling_unregister(devfreq->cooling);
> +               devfreq->cooling = NULL;
> +       }
> +
> +       if (devfreq->devfreq) {
> +               devm_devfreq_remove_device(&ldev->pdev->dev,
> +                                          devfreq->devfreq);
> +               devfreq->devfreq = NULL;
> +       }
> +
> +       if (devfreq->opp_of_table_added) {
> +               dev_pm_opp_of_remove_table(&ldev->pdev->dev);
> +               devfreq->opp_of_table_added = false;
> +       }
> +
> +       if (devfreq->regulators_opp_table) {
> +               dev_pm_opp_put_regulators(devfreq->regulators_opp_table);
> +               devfreq->regulators_opp_table = NULL;
> +       }
> +
> +       if (devfreq->clkname_opp_table) {
> +               dev_pm_opp_put_clkname(devfreq->clkname_opp_table);
> +               devfreq->clkname_opp_table = NULL;
> +       }
> +}
> +
> +int lima_devfreq_init(struct lima_device *ldev)
> +{
> +       struct thermal_cooling_device *cooling;
> +       struct device *dev = &ldev->pdev->dev;
> +       struct opp_table *opp_table;
> +       struct devfreq *devfreq;
> +       struct lima_devfreq *ldevfreq = &ldev->devfreq;
> +       struct dev_pm_opp *opp;
> +       unsigned long cur_freq;
> +       int ret;
> +
> +       if (!device_property_present(dev, "operating-points-v2"))
> +               /* Optional, continue without devfreq */
> +               return 0;
> +
> +       spin_lock_init(&ldevfreq->lock);
> +
> +       opp_table = dev_pm_opp_set_clkname(dev, "core");
> +       if (IS_ERR(opp_table)) {
> +               ret = PTR_ERR(opp_table);
> +               goto err_fini;
> +       }
> +
> +       ldevfreq->clkname_opp_table = opp_table;
> +
> +       opp_table = dev_pm_opp_set_regulators(dev,
> +                                             (const char *[]){ "mali" },
> +                                             1);
> +       if (IS_ERR(opp_table)) {
> +               ret = PTR_ERR(opp_table);
> +
> +               /* Continue if the optional regulator is missing */
> +               if (ret != -ENODEV)
> +                       goto err_fini;
> +       } else {
> +               ldevfreq->regulators_opp_table = opp_table;
> +       }
> +
> +       ret = dev_pm_opp_of_add_table(dev);
> +       if (ret)
> +               goto err_fini;
> +       ldevfreq->opp_of_table_added = true;
> +
> +       lima_devfreq_reset(ldevfreq);
> +
> +       cur_freq = clk_get_rate(ldev->clk_gpu);
> +
> +       opp = devfreq_recommended_opp(dev, &cur_freq, 0);
> +       if (IS_ERR(opp)) {
> +               ret = PTR_ERR(opp);
> +               goto err_fini;
> +       }
> +
> +       lima_devfreq_profile.initial_freq = cur_freq;
> +       dev_pm_opp_put(opp);
> +
> +       devfreq = devm_devfreq_add_device(dev, &lima_devfreq_profile,
> +                                         DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
> +       if (IS_ERR(devfreq)) {
> +               dev_err(dev, "Couldn't initialize GPU devfreq\n");
> +               ret = PTR_ERR(devfreq);
> +               goto err_fini;
> +       }
> +
> +       ldevfreq->devfreq = devfreq;
> +
> +       cooling = of_devfreq_cooling_register(dev->of_node, devfreq);
> +       if (IS_ERR(cooling))
> +               dev_info(dev, "Failed to register cooling device\n");
> +       else
> +               ldevfreq->cooling = cooling;
> +
> +       return 0;
> +
> +err_fini:
> +       lima_devfreq_fini(ldev);
> +       return ret;
> +}
> +
> +void lima_devfreq_record_busy(struct lima_devfreq *devfreq)
> +{
> +       unsigned long irqflags;
> +
> +       if (!devfreq->devfreq)
> +               return;
> +
> +       spin_lock_irqsave(&devfreq->lock, irqflags);
> +
> +       lima_devfreq_update_utilization(devfreq);
> +
> +       devfreq->busy_count++;
> +
> +       spin_unlock_irqrestore(&devfreq->lock, irqflags);
> +}
> +
> +void lima_devfreq_record_idle(struct lima_devfreq *devfreq)
> +{
> +       unsigned long irqflags;
> +
> +       if (!devfreq->devfreq)
> +               return;
> +
> +       spin_lock_irqsave(&devfreq->lock, irqflags);
> +
> +       lima_devfreq_update_utilization(devfreq);
> +
> +       WARN_ON(--devfreq->busy_count < 0);
> +
> +       spin_unlock_irqrestore(&devfreq->lock, irqflags);
> +}
> diff --git a/drivers/gpu/drm/lima/lima_devfreq.h b/drivers/gpu/drm/lima/lima_devfreq.h
> new file mode 100644
> index 000000000000..8d71ba9fb22a
> --- /dev/null
> +++ b/drivers/gpu/drm/lima/lima_devfreq.h
> @@ -0,0 +1,41 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */
> +
> +#ifndef __LIMA_DEVFREQ_H__
> +#define __LIMA_DEVFREQ_H__
> +
> +#include <linux/spinlock.h>
> +#include <linux/ktime.h>
> +
> +struct devfreq;
> +struct opp_table;
> +struct thermal_cooling_device;
> +
> +struct lima_device;
> +
> +struct lima_devfreq {
> +       struct devfreq *devfreq;
> +       struct opp_table *clkname_opp_table;
> +       struct opp_table *regulators_opp_table;
> +       struct thermal_cooling_device *cooling;
> +       bool opp_of_table_added;
> +
> +       ktime_t busy_time;
> +       ktime_t idle_time;
> +       ktime_t time_last_update;
> +       int busy_count;
> +       /*
> +        * Protect busy_time, idle_time, time_last_update and busy_count
> +        * because these can be updated concurrently, for example by the GP
> +        * and PP interrupts.
> +        */
> +       spinlock_t lock;
> +};
> +
> +int lima_devfreq_init(struct lima_device *ldev);
> +void lima_devfreq_fini(struct lima_device *ldev);
> +
> +void lima_devfreq_record_busy(struct lima_devfreq *devfreq);
> +void lima_devfreq_record_idle(struct lima_devfreq *devfreq);
> +
> +#endif
> diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
> index 19829b543024..7f1f7a1c03e5 100644
> --- a/drivers/gpu/drm/lima/lima_device.c
> +++ b/drivers/gpu/drm/lima/lima_device.c
> @@ -214,6 +214,8 @@ static int lima_init_gp_pipe(struct lima_device *dev)
>         struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_gp;
>         int err;
>
> +       pipe->ldev = dev;
> +
>         err = lima_sched_pipe_init(pipe, "gp");
>         if (err)
>                 return err;
> @@ -244,6 +246,8 @@ static int lima_init_pp_pipe(struct lima_device *dev)
>         struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_pp;
>         int err, i;
>
> +       pipe->ldev = dev;
> +
>         err = lima_sched_pipe_init(pipe, "pp");
>         if (err)
>                 return err;
> diff --git a/drivers/gpu/drm/lima/lima_device.h b/drivers/gpu/drm/lima/lima_device.h
> index 31158d86271c..d6c0f8b8f7e8 100644
> --- a/drivers/gpu/drm/lima/lima_device.h
> +++ b/drivers/gpu/drm/lima/lima_device.h
> @@ -8,6 +8,7 @@
>  #include <linux/delay.h>
>
>  #include "lima_sched.h"
> +#include "lima_devfreq.h"
>
>  enum lima_gpu_id {
>         lima_gpu_mali400 = 0,
> @@ -94,6 +95,8 @@ struct lima_device {
>
>         u32 *dlbu_cpu;
>         dma_addr_t dlbu_dma;
> +
> +       struct lima_devfreq devfreq;
>  };
>
>  static inline struct lima_device *
> diff --git a/drivers/gpu/drm/lima/lima_drv.c b/drivers/gpu/drm/lima/lima_drv.c
> index 2daac64d8955..d9f64e52ae9e 100644
> --- a/drivers/gpu/drm/lima/lima_drv.c
> +++ b/drivers/gpu/drm/lima/lima_drv.c
> @@ -10,6 +10,7 @@
>  #include <drm/drm_prime.h>
>  #include <drm/lima_drm.h>
>
> +#include "lima_device.h"
>  #include "lima_drv.h"
>  #include "lima_gem.h"
>  #include "lima_vm.h"
> @@ -306,18 +307,26 @@ static int lima_pdev_probe(struct platform_device *pdev)
>         if (err)
>                 goto err_out1;
>
> +       err = lima_devfreq_init(ldev);
> +       if (err) {
> +               dev_err(&pdev->dev, "Fatal error during devfreq init\n");
> +               goto err_out2;
> +       }
> +
>         /*
>          * Register the DRM device with the core and the connectors with
>          * sysfs.
>          */
>         err = drm_dev_register(ddev, 0);
>         if (err < 0)
> -               goto err_out2;
> +               goto err_out3;
>
>         return 0;
>
> -err_out2:
> +err_out3:
>         lima_device_fini(ldev);
> +err_out2:
> +       lima_devfreq_fini(ldev);
>  err_out1:
>         drm_dev_put(ddev);
>  err_out0:
> @@ -331,6 +340,7 @@ static int lima_pdev_remove(struct platform_device *pdev)
>         struct drm_device *ddev = ldev->ddev;
>
>         drm_dev_unregister(ddev);
> +       lima_devfreq_fini(ldev);
>         lima_device_fini(ldev);
>         drm_dev_put(ddev);
>         lima_sched_slab_fini();
> diff --git a/drivers/gpu/drm/lima/lima_sched.c b/drivers/gpu/drm/lima/lima_sched.c
> index 3886999b4533..d937d626b892 100644
> --- a/drivers/gpu/drm/lima/lima_sched.c
> +++ b/drivers/gpu/drm/lima/lima_sched.c
> @@ -5,6 +5,7 @@
>  #include <linux/slab.h>
>  #include <linux/xarray.h>
>
> +#include "lima_devfreq.h"
>  #include "lima_drv.h"
>  #include "lima_sched.h"
>  #include "lima_vm.h"
> @@ -214,6 +215,8 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
>          */
>         ret = dma_fence_get(task->fence);
>
> +       lima_devfreq_record_busy(&pipe->ldev->devfreq);
> +
>         pipe->current_task = task;
>
>         /* this is needed for MMU to work correctly, otherwise GP/PP
> @@ -285,6 +288,8 @@ static void lima_sched_timedout_job(struct drm_sched_job *job)
>         pipe->current_vm = NULL;
>         pipe->current_task = NULL;
>
> +       lima_devfreq_record_idle(&pipe->ldev->devfreq);
> +
>         drm_sched_resubmit_jobs(&pipe->base);
>         drm_sched_start(&pipe->base, true);
>  }
> @@ -364,5 +369,7 @@ void lima_sched_pipe_task_done(struct lima_sched_pipe *pipe)
>         } else {
>                 pipe->task_fini(pipe);
>                 dma_fence_signal(task->fence);
> +
> +               lima_devfreq_record_idle(&pipe->ldev->devfreq);
>         }
>  }
> diff --git a/drivers/gpu/drm/lima/lima_sched.h b/drivers/gpu/drm/lima/lima_sched.h
> index d64393fb50a9..19bbc5214cf2 100644
> --- a/drivers/gpu/drm/lima/lima_sched.h
> +++ b/drivers/gpu/drm/lima/lima_sched.h
> @@ -6,6 +6,7 @@
>
>  #include <drm/gpu_scheduler.h>
>
> +struct lima_device;
>  struct lima_vm;
>
>  struct lima_sched_task {
> @@ -44,6 +45,8 @@ struct lima_sched_pipe {
>         u32 fence_seqno;
>         spinlock_t fence_lock;
>
> +       struct lima_device *ldev;
> +
>         struct lima_sched_task *current_task;
>         struct lima_vm *current_vm;
>
> --
> 2.25.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel