dri-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>,
	David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	DRI Development <dri-devel@lists.freedesktop.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Daniel Vetter <daniel.vetter@intel.com>
Subject: Re: [PATCH 12/12] drm/modifiers: Enforce consistency between the cap an IN_FORMATS
Date: Tue, 13 Apr 2021 16:17:17 +0200
Message-ID: <YHWn7S2a+HAL9DtZ@phenom.ffwll.local> (raw)
In-Reply-To: <bea01abded059c00de330fbc154ee0db7378d58e.camel@pengutronix.de>

On Tue, Apr 13, 2021 at 01:54:00PM +0200, Lucas Stach wrote:
> Am Dienstag, dem 13.04.2021 um 11:49 +0200 schrieb Daniel Vetter:
> > It's very confusing for userspace to have to deal with inconsistencies
> > here, and some drivers screwed this up a bit. Most just ommitted the
> > format list when they meant to say that only linear modifier is
> > allowed, but some also meant that only implied modifiers are
> > acceptable (because actually none of the planes registered supported
> > modifiers).
> 
> For a lot of the embedded display drivers that never had any out-of-
> band tiling meta shared with the GPU part, the implied modifier is
> actually DRM_FORMAT_MOD_LINEAR, so maybe that's where some of the
> confusion about needing to specify the modifier list comes from.

Yeah that entire discussion last few days is why I wanted to audit all the
drivers and make sure that going forward we're more explicit&consistent
with all this. There's huge confusion around implied modifier vs "no
IN_FORMATS blob property" and what that exactly means.
-Daniel

> > Now that this is all done consistently across all drivers, document
> > the rules and enforce it in the drm core.
> 
> This clarification looks good to me.
> 
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> 
> > Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Maxime Ripard <mripard@kernel.org>
> > Cc: Thomas Zimmermann <tzimmermann@suse.de>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > ---
> >  drivers/gpu/drm/drm_plane.c   | 16 +++++++++++++++-
> >  include/drm/drm_mode_config.h |  2 ++
> >  2 files changed, 17 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> > index 0dd43882fe7c..16a7e3e57f7f 100644
> > --- a/drivers/gpu/drm/drm_plane.c
> > +++ b/drivers/gpu/drm/drm_plane.c
> > @@ -128,6 +128,11 @@
> >   *     pairs supported by this plane. The blob is a struct
> >   *     drm_format_modifier_blob. Without this property the plane doesn't
> >   *     support buffers with modifiers. Userspace cannot change this property.
> > + *
> > + *     Note that userspace can check the DRM_CAP_ADDFB2_MODIFIERS driver
> > + *     capability for general modifier support. If this flag is set then every
> > + *     plane will have the IN_FORMATS property, even when it only supports
> > + *     DRM_FORMAT_MOD_LINEAR.
> >   */
> >  
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >  static unsigned int drm_num_planes(struct drm_device *dev)
> > @@ -277,8 +282,14 @@ static int __drm_universal_plane_init(struct drm_device *dev,
> >  			format_modifier_count++;
> >  	}
> >  
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > -	if (format_modifier_count)
> > +	/* autoset the cap and check for consistency across all planes */
> > +	if (format_modifier_count) {
> > +		WARN_ON(!config->allow_fb_modifiers &&
> > +			!list_empty(&config->plane_list));
> >  		config->allow_fb_modifiers = true;
> > +	} else {
> > +		WARN_ON(config->allow_fb_modifiers);
> > +	}
> >  
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >  	plane->modifier_count = format_modifier_count;
> >  	plane->modifiers = kmalloc_array(format_modifier_count,
> > @@ -360,6 +371,9 @@ static int __drm_universal_plane_init(struct drm_device *dev,
> >   * drm_universal_plane_init() to let the DRM managed resource infrastructure
> >   * take care of cleanup and deallocation.
> >   *
> > + * Drivers supporting modifiers must set @format_modifiers on all their planes,
> > + * even those that only support DRM_FORMAT_MOD_LINEAR.
> > + *
> >   * Returns:
> >   * Zero on success, error code on failure.
> >   */
> > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > index ab424ddd7665..1ddf7783fdf7 100644
> > --- a/include/drm/drm_mode_config.h
> > +++ b/include/drm/drm_mode_config.h
> > @@ -909,6 +909,8 @@ struct drm_mode_config {
> >  	 * @allow_fb_modifiers:
> >  	 *
> >  	 * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call.
> > +	 * Note that drivers should not set this directly, it is automatically
> > +	 * set in drm_universal_plane_init().
> >  	 *
> >  	 * IMPORTANT:
> >  	 *
> 
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13  9:48 [PATCH 01/12] drm/arm: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-13  9:48 ` [PATCH 02/12] drm/arm/malidp: Always list modifiers Daniel Vetter
2021-04-13  9:48 ` [PATCH 03/12] drm/exynos: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-20  6:31   ` Inki Dae
2021-04-20  8:41     ` Daniel Vetter
2021-04-13  9:48 ` [PATCH 04/12] drm/i915: " Daniel Vetter
2021-04-13  9:48 ` [PATCH 05/12] drm/imx: " Daniel Vetter
2021-04-13 11:47   ` Lucas Stach
2021-04-13 14:04     ` Daniel Vetter
2021-04-13 14:14       ` Lucas Stach
2021-04-14  2:24         ` Liu Ying
2021-04-14  9:10           ` Daniel Vetter
2021-04-15 11:35     ` Daniel Vetter
2021-04-13  9:48 ` [PATCH 06/12] drm/msm/dpu1: " Daniel Vetter
2021-04-13  9:48 ` [PATCH 07/12] drm/msm/mdp4: Fix modifier support enabling Daniel Vetter
2021-04-13  9:48 ` [PATCH 08/12] drm/nouveau: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-13  9:49 ` [PATCH 09/12] drm/stm: " Daniel Vetter
2021-04-13  9:49 ` [PATCH 10/12] drm/tegra: " Daniel Vetter
2021-04-13 11:37   ` Thierry Reding
2021-04-15 11:33     ` Daniel Vetter
2021-04-13  9:49 ` [PATCH 11/12] drm/vc4: " Daniel Vetter
2021-04-14  8:51   ` Maxime Ripard
2021-04-13  9:49 ` [PATCH 12/12] drm/modifiers: Enforce consistency between the cap an IN_FORMATS Daniel Vetter
2021-04-13 11:54   ` Lucas Stach
2021-04-13 14:17     ` Daniel Vetter [this message]
2021-04-13 11:56   ` Pekka Paalanen
2021-04-13 14:11     ` Daniel Vetter
2021-04-13 14:19       ` Daniel Vetter
2021-04-14  7:45       ` Pekka Paalanen
2021-04-13 15:22   ` Simon Ser
2021-04-14  8:52   ` Maxime Ripard
2021-04-14  9:08   ` [PATCH] " Daniel Vetter
2021-04-14 12:14     ` Pekka Paalanen
2021-04-16  6:30     ` Simon Ser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YHWn7S2a+HAL9DtZ@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@ffwll.ch \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=l.stach@pengutronix.de \
    --cc=pekka.paalanen@collabora.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git
	git clone --mirror https://lore.kernel.org/dri-devel/1 dri-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git