From: Loic Poulain <loic.poulain@linaro.org>
To: Marek Vasut <marex@denx.de>, dri-devel@lists.freedesktop.org
Cc: dianders@chromium.org, swboyd@chromium.org,
philippe.schenker@toradex.com, laurent.pinchart@ideasonboard.com,
valentin@compulab.co.il, sam@ravnborg.org,
jagan@amarulasolutions.com
Subject: Re: [PATCH V2 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver
Date: Fri, 23 Apr 2021 18:03:43 +0200 [thread overview]
Message-ID: <bbd542f5-9d75-20a5-55d4-67f1fd042fdd@linaro.org> (raw)
In-Reply-To: <20210421223122.112736-2-marex@denx.de>
On 22/04/2021 00:31, Marek Vasut wrote:
> Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
> and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
> bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
> but easy to add.
>
> The driver operates the chip via I2C bus. Currently the LVDS clock are
> always derived from DSI clock lane, which is the usual mode of operation.
> Support for clock from external oscillator is not implemented, but it is
> easy to add if ever needed. Only RGB888 pixel format is implemented, the
> LVDS666 is not supported, but could be added if needed.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Philippe Schenker <philippe.schenker@toradex.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Stephen Boyd <swboyd@chromium.org>
> Cc: Valentin Raevsky <valentin@compulab.co.il>
> To: dri-devel@lists.freedesktop.org
> ---
> V2: - Use dev_err_probe()
> - Set REG_RC_RESET as volatile
> - Wait for PLL stabilization by polling REG_RC_LVDS_PLL
> - Use ctx->mode = *adj instead of *mode in sn65dsi83_mode_set
> - Add tested DSI84 support in dual-link mode
> - Correctly set VCOM
> - Fill in missing DSI CHB and LVDS CHB bits from DSI84 and DSI85
> datasheets, with that all the reserved bits make far more sense
> as the DSI83 and DSI84 seems to be reduced version of DSI85
> ---
> drivers/gpu/drm/bridge/Kconfig | 10 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/ti-sn65dsi83.c | 617 ++++++++++++++++++++++++++
> 3 files changed, 628 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi83.c
Tested on MSC-SM2S-IMX8MINI module with a 1024x768 (VESA-24) single LVDS
channel panel.
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Loic
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-04-23 15:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 22:31 [PATCH V2 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 bindings Marek Vasut
2021-04-21 22:31 ` [PATCH V2 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver Marek Vasut
2021-04-23 16:03 ` Loic Poulain [this message]
2021-04-28 7:51 ` Frieder Schrempf
2021-04-28 8:13 ` Frieder Schrempf
2021-04-28 9:26 ` Loic Poulain
2021-04-28 9:24 ` Neil Armstrong
2021-04-28 9:49 ` Jagan Teki
2021-04-28 14:18 ` Marek Vasut
2021-04-28 14:16 ` Marek Vasut
2021-04-29 16:27 ` Frieder Schrempf
2021-04-30 8:34 ` Neil Armstrong
2021-04-21 22:56 ` [PATCH V2 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 bindings Laurent Pinchart
2021-04-22 8:38 ` Neil Armstrong
2021-04-22 16:16 ` Marek Vasut
2021-04-22 8:43 ` Jagan Teki
2021-04-22 16:22 ` Marek Vasut
2021-04-28 7:56 ` Frieder Schrempf
2021-04-28 14:19 ` Marek Vasut
2021-04-27 12:15 [PATCH V2 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver Felix Radensky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bbd542f5-9d75-20a5-55d4-67f1fd042fdd@linaro.org \
--to=loic.poulain@linaro.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=marex@denx.de \
--cc=philippe.schenker@toradex.com \
--cc=sam@ravnborg.org \
--cc=swboyd@chromium.org \
--cc=valentin@compulab.co.il \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).