[PATCH v2 40/91] drm/vc4: plane: Register all the planes at once

[Maxime Ripard <maxime@cerno.tech>]

Instead of creating planes for each CRTC, we eventually want to create all
the planes for each CRTCs.

In order to make that more convenient, let's iterate on the CRTCs in the
plane creation function instead of its caller.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_drv.c   |  9 ++----
 drivers/gpu/drm/vc4/vc4_drv.h   |  3 +--
 drivers/gpu/drm/vc4/vc4_plane.c | 54 +++++++++++++++++-----------------
 3 files changed, 32 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index daf07a61a7b5..ed7893ee188a 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -250,7 +250,6 @@ static int vc4_drm_bind(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm;
-	struct drm_crtc *crtc;
 	struct vc4_dev *vc4;
 	struct device_node *node;
 	int ret = 0;
@@ -289,11 +288,9 @@ static int vc4_drm_bind(struct device *dev)
 	if (ret)
 		goto gem_destroy;
 
-	drm_for_each_crtc(crtc, drm) {
-		ret = vc4_plane_create_additional_planes(drm, crtc);
-		if (ret)
-			continue;
-	}
+	ret = vc4_plane_create_additional_planes(drm);
+	if (ret)
+		goto unbind_all;
 
 	drm_fb_helper_remove_conflicting_framebuffers(NULL, "vc4drmfb", false);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 0875d29a0cee..25466aa9dceb 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -855,8 +855,7 @@ int vc4_kms_load(struct drm_device *dev);
 /* vc4_plane.c */
 struct drm_plane *vc4_plane_init(struct drm_device *dev,
 				 enum drm_plane_type type);
-int vc4_plane_create_additional_planes(struct drm_device *dev,
-				       struct drm_crtc *crtc);
+int vc4_plane_create_additional_planes(struct drm_device *dev);
 u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist);
 u32 vc4_plane_dlist_size(const struct drm_plane_state *state);
 void vc4_plane_async_set_fb(struct drm_plane *plane,
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 89d03605332e..824c188980b0 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -1372,39 +1372,41 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
 	return plane;
 }
 
-int vc4_plane_create_additional_planes(struct drm_device *drm,
-				       struct drm_crtc *crtc)
+int vc4_plane_create_additional_planes(struct drm_device *drm)
 {
 	struct drm_plane *cursor_plane;
+	struct drm_crtc *crtc;
 	unsigned int i;
 
-	/* Set up some arbitrary number of planes.  We're not limited
-	 * by a set number of physical registers, just the space in
-	 * the HVS (16k) and how small an plane can be (28 bytes).
-	 * However, each plane we set up takes up some memory, and
-	 * increases the cost of looping over planes, which atomic
-	 * modesetting does quite a bit.  As a result, we pick a
-	 * modest number of planes to expose, that should hopefully
-	 * still cover any sane usecase.
-	 */
-	for (i = 0; i < 8; i++) {
-		struct drm_plane *plane =
-			vc4_plane_init(drm, DRM_PLANE_TYPE_OVERLAY);
+	drm_for_each_crtc(crtc, drm) {
+		/* Set up some arbitrary number of planes.  We're not limited
+		 * by a set number of physical registers, just the space in
+		 * the HVS (16k) and how small an plane can be (28 bytes).
+		 * However, each plane we set up takes up some memory, and
+		 * increases the cost of looping over planes, which atomic
+		 * modesetting does quite a bit.  As a result, we pick a
+		 * modest number of planes to expose, that should hopefully
+		 * still cover any sane usecase.
+		 */
+		for (i = 0; i < 8; i++) {
+			struct drm_plane *plane =
+				vc4_plane_init(drm, DRM_PLANE_TYPE_OVERLAY);
 
-		if (IS_ERR(plane))
-			continue;
+			if (IS_ERR(plane))
+				continue;
 
-		plane->possible_crtcs = drm_crtc_mask(crtc);
-	}
+			plane->possible_crtcs = drm_crtc_mask(crtc);
+		}
 
-	/* Set up the legacy cursor after overlay initialization,
-	 * since we overlay planes on the CRTC in the order they were
-	 * initialized.
-	 */
-	cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
-	if (!IS_ERR(cursor_plane)) {
-		cursor_plane->possible_crtcs = drm_crtc_mask(crtc);
-		crtc->cursor = cursor_plane;
+		/* Set up the legacy cursor after overlay initialization,
+		 * since we overlay planes on the CRTC in the order they were
+		 * initialized.
+		 */
+		cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
+		if (!IS_ERR(cursor_plane)) {
+			cursor_plane->possible_crtcs = drm_crtc_mask(crtc);
+			crtc->cursor = cursor_plane;
+		}
 	}
 
 	return 0;
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel