dri-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Marek Vasut <marex@denx.de>,
	kernel@pengutronix.de, dri-devel@lists.freedesktop.org,
	linux-imx@nxp.com
Subject: Re: [PATCH 14/21] drm: mxsfb: Enable vblank handling
Date: Tue, 24 Mar 2020 00:08:16 +0100
Message-ID: <c6a1ff930152e17b61ec9e032fa7e4cb@agner.ch> (raw)
In-Reply-To: <20200309195216.31042-15-laurent.pinchart@ideasonboard.com>

On 2020-03-09 20:52, Laurent Pinchart wrote:
> Enable vblank handling when the CRTC is turned on and disable it when it
> is turned off. This requires moving vblank init after the KMS pipeline
> initialisation, otherwise drm_vblank_init() gets called with 0 CRTCs.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

With this patch applied I start to get system resets on my Colibri iMX7
test device during system boot shortly after initializing mxsfb. It
happens not on every boot, but rather often, I would say every second or
third. From what I can tell the interrupt handling should be safe, but
it seems that every now and then something races. Any idea what that
could be?

--
Stefan

> ---
>  drivers/gpu/drm/mxsfb/mxsfb_drv.c | 15 +++++++++------
>  drivers/gpu/drm/mxsfb/mxsfb_kms.c |  6 +++++-
>  2 files changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> index e324bd2a63a5..72b4f6a947a4 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> @@ -160,12 +160,6 @@ static int mxsfb_load(struct drm_device *drm,
> unsigned long flags)
>  
>  	pm_runtime_enable(drm->dev);
>  
> -	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> -	if (ret < 0) {
> -		dev_err(drm->dev, "Failed to initialise vblank\n");
> -		goto err_vblank;
> -	}
> -
>  	/* Modeset init */
>  	drm_mode_config_init(drm);
>  
> @@ -175,6 +169,15 @@ static int mxsfb_load(struct drm_device *drm,
> unsigned long flags)
>  		goto err_vblank;
>  	}
>  
> +	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> +	if (ret < 0) {
> +		dev_err(drm->dev, "Failed to initialise vblank\n");
> +		goto err_vblank;
> +	}
> +
> +	/* Start with vertical blanking interrupt reporting disabled. */
> +	drm_crtc_vblank_off(&mxsfb->crtc);
> +
>  	ret = mxsfb_attach_bridge(mxsfb);
>  	if (ret) {
>  		dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> index ac2696c8483d..640305fb1068 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> @@ -322,8 +322,10 @@ static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc,
>  	dma_addr_t paddr;
>  
>  	pm_runtime_get_sync(drm->dev);
> -
>  	mxsfb_enable_axi_clk(mxsfb);
> +
> +	drm_crtc_vblank_on(crtc);
> +
>  	mxsfb_crtc_mode_set_nofb(mxsfb);
>  
>  	/* Write cur_buf as well to avoid an initial corrupt frame */
> @@ -353,6 +355,8 @@ static void mxsfb_crtc_atomic_disable(struct drm_crtc *crtc,
>  	}
>  	spin_unlock_irq(&drm->event_lock);
>  
> +	drm_crtc_vblank_off(crtc);
> +
>  	mxsfb_disable_axi_clk(mxsfb);
>  	pm_runtime_put_sync(drm->dev);
>  }
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply index

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-09 19:51 [PATCH 00/21] drm: mxsfb: Add i.MX7 support Laurent Pinchart
2020-03-09 19:51 ` [PATCH 01/21] drm: mxsfb: Remove fbdev leftovers Laurent Pinchart
2020-03-23 20:23   ` Stefan Agner
2020-03-09 19:51 ` [PATCH 02/21] drm: mxsfb: Use drm_panel_bridge Laurent Pinchart
2020-03-23 21:27   ` Stefan Agner
2020-03-23 21:38     ` Sam Ravnborg
2020-03-23 23:50       ` Stefan Agner
2020-05-30  2:14     ` Laurent Pinchart
2020-06-02 13:12       ` Daniel Vetter
2020-06-02 14:34         ` Stefan Agner
2020-06-02 17:18           ` Laurent Pinchart
2020-06-02 17:13         ` Laurent Pinchart
2020-06-03  8:16           ` Daniel Vetter
2020-06-04 20:10             ` Sam Ravnborg
2020-03-09 19:51 ` [PATCH 03/21] drm: mxsfb: Use BIT() macro to define register bitfields Laurent Pinchart
2020-03-23 21:34   ` Stefan Agner
2020-03-09 19:51 ` [PATCH 04/21] drm: mxsfb: Remove unused macros from mxsfb_regs.h Laurent Pinchart
2020-03-23 21:36   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 05/21] drm: mxsfb: Clarify format and bus width configuration Laurent Pinchart
2020-03-23 21:42   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 06/21] drm: mxsfb: Pass mxsfb_drm_private pointer to mxsfb_reset_block() Laurent Pinchart
2020-03-23 21:43   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 07/21] drm: mxsfb: Use LCDC_CTRL register name explicitly Laurent Pinchart
2020-03-23 21:48   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 08/21] drm: mxsfb: Remove register definitions from mxsfb_crtc.c Laurent Pinchart
2020-03-23 21:49   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 09/21] drm: mxsfb: Remove unneeded includes Laurent Pinchart
2020-03-23 21:53   ` Stefan Agner
2020-05-30  0:33     ` Laurent Pinchart
2020-03-09 19:52 ` [PATCH 10/21] drm: mxsfb: Stop using DRM simple display pipeline helper Laurent Pinchart
2020-03-23 22:30   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 11/21] drm: mxsfb: Rename mxsfb_crtc.c to mxsfb_kms.c Laurent Pinchart
2020-03-23 22:31   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 12/21] drm: mxsfb: Move vblank event arm to CRTC .atomic_flush() Laurent Pinchart
2020-03-23 22:38   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 13/21] drm: mxsfb: Don't touch AXI clock in IRQ context Laurent Pinchart
2020-03-23 22:50   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 14/21] drm: mxsfb: Enable vblank handling Laurent Pinchart
2020-03-23 23:08   ` Stefan Agner [this message]
2020-03-24 10:37     ` Stefan Agner
2020-03-09 19:52 ` [PATCH 15/21] drm: mxsfb: Remove mxsfb_devdata unused fields Laurent Pinchart
2020-03-23 23:15   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 16/21] drm: mxsfb: Add i.MX7 to the list of supported SoCs in Kconfig Laurent Pinchart
2020-03-10 16:28   ` Fabio Estevam
2020-03-10 16:32     ` Laurent Pinchart
2020-03-10 16:37       ` [PATCH v1.1 " Laurent Pinchart
2020-03-23 23:18   ` [PATCH " Stefan Agner
2020-03-09 19:52 ` [PATCH 17/21] drm: mxsfb: Update internal IP version number for i.MX6SX Laurent Pinchart
2020-03-23 23:20   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 18/21] drm: mxsfb: Drop non-OF support Laurent Pinchart
2020-03-23 23:23   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 19/21] drm: mxsfb: Turn mxsfb_set_pixel_fmt() into a void function Laurent Pinchart
2020-03-23 23:28   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 20/21] drm: mxsfb: Merge mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() Laurent Pinchart
2020-03-23 23:34   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 21/21] drm: mxsfb: Support the alpha plane Laurent Pinchart
2020-03-23 23:48   ` Stefan Agner
2020-05-30  2:44     ` Laurent Pinchart
2020-03-19  9:36 ` [PATCH 00/21] drm: mxsfb: Add i.MX7 support Laurent Pinchart
2020-04-12 16:37 ` Guido Günther
2020-05-26 15:13 ` Stefan Agner
2020-05-30  0:29   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c6a1ff930152e17b61ec9e032fa7e4cb@agner.ch \
    --to=stefan@agner.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git