From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
Phil Elwell <phil@raspberrypi.com>,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 00/89] drm/vc4: Support BCM2711 Display Pipeline
Date: Mon, 24 Feb 2020 10:06:02 +0100 [thread overview]
Message-ID: <cover.6c896ace9a5a7840e9cec008b553cbb004ca1f91.1582533919.git-series.maxime@cerno.tech> (raw)
Hi everyone,
Here's a (pretty long) series to introduce support in the VC4 DRM driver
for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
The main differences are that there's two HDMI controllers and that there's
more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
have only 3 FIFOs. Both of those differences are breaking a bunch of
expectations in the driver, so we first need a good bunch of cleanup and
reworks to introduce support for the new controllers.
Similarly, the HDMI controller has all its registers shuffled and split in
multiple controllers now, so we need a bunch of changes to support this as
well.
Only the HDMI support is enabled for now (even though the DPI output has
been tested too). There's a couple of rough edges still that should be
addressed in the next versions:
- Dual output doesn't work
- The transposer (and thus writeback) doesn't work either and conflicts
with the output mux too.
Let me know if you have any comments
Maxime
Dave Stevenson (2):
drm/vc4: drv: Add support for the BCM2711 HVS5
drm/vc4: plane: Improve LBM usage
Maxime Ripard (87):
dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema
dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding
i2c: brcmstb: Support BCM2711 HDMI BSC controllers
i2c: brcmstb: Allow to compile it on BCM2835
clk: Return error code when of provider pointer is NULL
dt-bindings: clock: Add a binding for the RPi Firmware clocks
clk: bcm: rpi: Allow the driver to be probed by DT
clk: bcm: rpi: Statically init clk_init_data
clk: bcm: rpi: Use clk_hw_register for pllb_arm
clk: bcm: rpi: Remove global pllb_arm clock pointer
clk: bcm: rpi: Make sure pllb_arm is removed
clk: bcm: rpi: Remove pllb_arm_lookup global pointer
clk: bcm: rpi: Switch to clk_hw_register_clkdev
clk: bcm: rpi: Make sure the clkdev lookup is removed
clk: bcm: rpi: Create a data structure for the clocks
clk: bcm: rpi: Add clock id to data
clk: bcm: rpi: Pass the clocks data to the firmware function
clk: bcm: rpi: Rename is_prepared function
clk: bcm: rpi: Split pllb clock hooks
clk: bcm: rpi: Make the PLLB registration function return a clk_hw
clk: bcm: rpi: Add DT provider for the clocks
clk: bcm: rpi: Discover the firmware clocks
ARM: dts: bcm2711: Add firmware clocks node
reset: Move reset-simple header out of drivers/reset
reset: simple: Add reset callback
dt-bindings: clock: Add BCM2711 DVP binding
clk: bcm: Add BCM2711 DVP driver
ARM: dts: bcm2711: Add HDMI DVP
dt-bindings: display: Convert VC4 bindings to schemas
dt-bindings: display: vc4: dpi: Add missing clock-names property
dt-bindings: display: vc4: dsi: Add missing clock properties
dt-bindings: display: vc4: hdmi: Add missing clock-names property
dt-bindings: display: vc4: Document BCM2711 VC5
drm/vc4: drv: Add include guards
drm/vc4: drv: Support BCM2711
drm/vc4: plane: Move planes creation to its own function
drm/vc4: plane: Move additional planes creation to driver
drm/vc4: plane: Register all the planes at once
drm/vc4: plane: Create overlays for any CRTC
drm/vc4: plane: Create more planes
drm/vc4: crtc: Rename SoC data structures
drm/vc4: crtc: Move crtc state to common header
drm/vc4: crtc: Deal with different number of pixel per clock
drm/vc4: crtc: Use a shared interrupt
drm/vc4: crtc: Turn static const variable into a define
drm/vc4: crtc: Move the cob allocation outside of bind
drm/vc4: crtc: Rename HVS channel to output
drm/vc4: crtc: Use local chan variable
drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
drm/vc4: crtc: Assign output to channel automatically
drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
drm/vc4: crtc: Add function to compute FIFO level bits
drm/vc4: crtc: Rename HDMI encoder type to HDMI0
drm/vc4: crtc: Add HDMI1 encoder type
drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt
drm/vc4: crtc: Disable color management for HVS5
dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
drm/vc4: crtc: Add BCM2711 pixelvalves
drm/vc4: hdmi: Use debugfs private field
drm/vc4: hdmi: Move structure to header
drm/vc4: hdmi: rework connectors and encoders
drm/vc4: hdmi: Remove DDC argument to connector_init
drm/vc4: hdmi: Rename hdmi to vc4_hdmi
drm/vc4: hdmi: Move accessors to vc4_hdmi
drm/vc4: hdmi: Use local vc4_hdmi directly
drm/vc4: hdmi: Add container_of macros for encoders and connectors
drm/vc4: hdmi: Pass vc4_hdmi to CEC code
drm/vc4: hdmi: Remove vc4_dev hdmi pointer
drm/vc4: hdmi: Remove vc4_hdmi_connector
drm/vc4: hdmi: Introduce resource init and variant
drm/vc4: hdmi: Implement a register layout abstraction
drm/vc4: hdmi: Add reset callback
drm/vc4: hdmi: Add PHY init and disable function
drm/vc4: hdmi: Add PHY RNG enable / disable function
drm/vc4: hdmi: Add a CSC setup callback
drm/vc4: hdmi: Add a set_timings callback
drm/vc4: hdmi: Add HDMI ID
drm/vc4: hdmi: Deal with multiple debugfs files
drm/vc4: hdmi: Add an audio support flag
drm/vc4: hdmi: Move CEC init to its own function
drm/vc4: hdmi: Add CEC support flag
drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
drm/vc4: hdmi: Support the BCM2711 HDMI controllers
dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
ARM: dts: bcm2711: Enable the display pipeline
Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml | 47 ++-
Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.yaml | 39 ++-
Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +---------
Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 72 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 84 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 180 ++++++++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 45 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 35 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++-
Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 97 +++++-
Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt | 26 +-
MAINTAINERS | 4 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 40 ++-
arch/arm/boot/dts/bcm2711.dtsi | 132 +++++++-
drivers/clk/bcm/Kconfig | 1 +-
drivers/clk/bcm/Makefile | 1 +-
drivers/clk/bcm/clk-bcm2711-dvp.c | 113 ++++++-
drivers/clk/bcm/clk-raspberrypi.c | 271 ++++++++++----
drivers/clk/clk.c | 14 +-
drivers/gpu/drm/vc4/Makefile | 1 +-
drivers/gpu/drm/vc4/vc4_crtc.c | 328 ++++++++++-------
drivers/gpu/drm/vc4/vc4_drv.c | 5 +-
drivers/gpu/drm/vc4/vc4_drv.h | 56 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 1364 ++++++++++++++++++++++++++++++++++++++++++------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 175 +++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 509 +++++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 445 +++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hvs.c | 17 +-
drivers/gpu/drm/vc4/vc4_kms.c | 175 ++++++++-
drivers/gpu/drm/vc4/vc4_plane.c | 271 ++++++++++----
drivers/gpu/drm/vc4/vc4_regs.h | 173 ++++-----
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-brcmstb.c | 33 ++-
drivers/reset/reset-simple.c | 24 +-
drivers/reset/reset-simple.h | 41 +--
drivers/reset/reset-socfpga.c | 3 +-
drivers/reset/reset-sunxi.c | 3 +-
drivers/reset/reset-uniphier-glue.c | 3 +-
include/linux/reset/reset-simple.h | 45 ++-
include/soc/bcm2835/raspberrypi-firmware.h | 5 +-
43 files changed, 4020 insertions(+), 1193 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.yaml
delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
create mode 100644 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h
delete mode 100644 drivers/reset/reset-simple.h
create mode 100644 include/linux/reset/reset-simple.h
base-commit: fca8fce14e6ce96f4d22783ab8ddea09c0f4de34
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-02-24 9:42 UTC|newest]
Thread overview: 161+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 9:06 Maxime Ripard [this message]
2020-02-24 9:06 ` [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema Maxime Ripard
2020-02-24 17:40 ` Florian Fainelli
2020-02-25 18:14 ` Rob Herring
2020-03-10 10:07 ` Wolfram Sang
2020-03-10 10:07 ` Wolfram Sang
2020-02-24 9:06 ` [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding Maxime Ripard
2020-02-24 17:48 ` Florian Fainelli
2020-02-25 18:15 ` Rob Herring
2020-03-10 10:07 ` Wolfram Sang
2020-02-24 9:06 ` [PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers Maxime Ripard
2020-02-24 17:44 ` Florian Fainelli
2020-03-10 10:12 ` Wolfram Sang
2020-02-24 9:06 ` [PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-02-24 17:39 ` Florian Fainelli
2020-03-10 10:16 ` Wolfram Sang
2020-02-24 9:06 ` [PATCH 05/89] clk: Return error code when of provider pointer is NULL Maxime Ripard
2020-03-12 23:13 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 06/89] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-02-25 18:16 ` Rob Herring
2020-03-12 23:14 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 07/89] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-02-25 16:00 ` Nicolas Saenz Julienne
2020-02-26 15:01 ` Maxime Ripard
2020-02-28 19:57 ` Nicolas Saenz Julienne
2020-03-01 12:16 ` Stefan Wahren
2020-03-23 15:13 ` Maxime Ripard
2020-02-24 9:06 ` [PATCH 08/89] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-02-25 16:05 ` Nicolas Saenz Julienne
2020-02-24 9:06 ` [PATCH 09/89] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-02-25 16:11 ` Nicolas Saenz Julienne
2020-03-12 23:17 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 10/89] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-02-25 16:13 ` Nicolas Saenz Julienne
2020-02-26 14:26 ` Maxime Ripard
2020-02-26 14:57 ` Nicolas Saenz Julienne
2020-02-24 9:06 ` [PATCH 11/89] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-02-25 16:14 ` Nicolas Saenz Julienne
2020-03-12 23:20 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 12/89] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-02-25 16:16 ` Nicolas Saenz Julienne
2020-03-12 23:21 ` Stephen Boyd
2020-03-13 1:13 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 13/89] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-02-25 16:17 ` Nicolas Saenz Julienne
2020-03-13 1:12 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 14/89] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-02-25 16:19 ` Nicolas Saenz Julienne
2020-03-13 1:11 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 15/89] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-02-25 16:24 ` Nicolas Saenz Julienne
2020-03-13 1:11 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 16/89] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-02-24 19:25 ` Stefan Wahren
2020-02-25 9:54 ` Maxime Ripard
2020-02-25 14:33 ` Nicolas Saenz Julienne
2020-02-25 16:24 ` Nicolas Saenz Julienne
2020-03-13 1:11 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 17/89] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-02-25 16:26 ` Nicolas Saenz Julienne
2020-03-13 1:09 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 18/89] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-02-25 16:45 ` Nicolas Saenz Julienne
2020-03-13 1:09 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 19/89] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-03-13 1:08 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 20/89] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-03-13 1:01 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 21/89] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-03-13 1:01 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-02-24 16:47 ` kbuild test robot
2020-02-24 16:47 ` [PATCH] clk: bcm: rpi: fix noderef.cocci warnings kbuild test robot
2020-02-24 18:15 ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Florian Fainelli
2020-02-26 14:15 ` Maxime Ripard
2020-02-24 20:24 ` kbuild test robot
2020-03-13 1:08 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 23/89] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-02-24 9:06 ` [PATCH 24/89] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-02-24 9:06 ` [PATCH 25/89] reset: simple: Add reset callback Maxime Ripard
2020-03-04 12:03 ` Philipp Zabel
2020-02-24 9:06 ` [PATCH 26/89] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-02-25 18:17 ` Rob Herring
2020-02-24 9:06 ` [PATCH 27/89] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-03-13 1:00 ` Stephen Boyd
2020-03-23 10:56 ` Maxime Ripard
2020-03-25 2:20 ` Stephen Boyd
2020-02-24 9:06 ` [PATCH 28/89] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-02-24 9:06 ` [PATCH 29/89] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-02-24 18:41 ` Rob Herring
2020-02-25 11:54 ` Maxime Ripard
2020-02-25 14:02 ` Rob Herring
2020-02-24 9:06 ` [PATCH 30/89] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-02-25 18:17 ` Rob Herring
2020-02-24 9:06 ` [PATCH 31/89] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-02-25 18:18 ` Rob Herring
2020-02-24 9:06 ` [PATCH 32/89] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-02-25 18:18 ` Rob Herring
2020-02-24 9:06 ` [PATCH 33/89] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-02-25 18:18 ` Rob Herring
2020-02-24 9:06 ` [PATCH 34/89] drm/vc4: drv: Add include guards Maxime Ripard
2020-02-24 9:06 ` [PATCH 35/89] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-02-24 9:06 ` [PATCH 36/89] drm/vc4: drv: Add support for the BCM2711 HVS5 Maxime Ripard
2020-02-24 9:06 ` [PATCH 37/89] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-02-24 9:06 ` [PATCH 38/89] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-02-24 9:06 ` [PATCH 39/89] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-02-24 9:06 ` [PATCH 40/89] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-02-24 9:06 ` [PATCH 41/89] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-02-24 9:06 ` [PATCH 42/89] drm/vc4: plane: Create more planes Maxime Ripard
2020-02-24 9:06 ` [PATCH 43/89] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-02-24 9:06 ` [PATCH 44/89] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-02-24 9:06 ` [PATCH 45/89] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-02-24 9:06 ` [PATCH 46/89] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-02-24 9:06 ` [PATCH 47/89] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-02-24 9:06 ` [PATCH 48/89] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-02-24 9:06 ` [PATCH 49/89] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-02-24 9:06 ` [PATCH 50/89] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-02-24 9:06 ` [PATCH 51/89] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-02-24 9:06 ` [PATCH 52/89] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-02-24 9:06 ` [PATCH 53/89] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-02-24 9:06 ` [PATCH 54/89] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-02-24 9:06 ` [PATCH 55/89] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-02-24 9:06 ` [PATCH 56/89] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-02-24 9:06 ` [PATCH 57/89] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-02-24 9:07 ` [PATCH 58/89] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-02-24 9:07 ` [PATCH 59/89] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-02-25 18:19 ` Rob Herring
2020-02-24 9:07 ` [PATCH 60/89] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-02-24 9:07 ` [PATCH 61/89] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-02-24 9:07 ` [PATCH 62/89] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-02-24 9:07 ` [PATCH 63/89] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-02-24 9:07 ` [PATCH 64/89] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-02-24 9:07 ` [PATCH 65/89] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-02-24 9:07 ` [PATCH 66/89] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-02-24 9:07 ` [PATCH 67/89] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-02-24 9:07 ` [PATCH 68/89] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-02-24 9:07 ` [PATCH 69/89] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-02-24 9:07 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-02-24 9:07 ` [PATCH 71/89] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-02-24 9:07 ` [PATCH 72/89] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-02-24 9:07 ` [PATCH 73/89] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-02-24 9:07 ` [PATCH 74/89] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-02-24 9:07 ` [PATCH 75/89] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-02-24 9:07 ` [PATCH 76/89] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-02-24 9:07 ` [PATCH 77/89] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-02-24 9:07 ` [PATCH 78/89] drm/vc4: hdmi: Add a set_timings callback Maxime Ripard
2020-02-24 9:07 ` [PATCH 79/89] drm/vc4: hdmi: Add HDMI ID Maxime Ripard
2020-02-24 9:07 ` [PATCH 80/89] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-02-24 9:07 ` [PATCH 81/89] drm/vc4: hdmi: Add an audio support flag Maxime Ripard
2020-02-24 9:07 ` [PATCH 82/89] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-02-24 9:07 ` [PATCH 83/89] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-02-24 9:07 ` [PATCH 84/89] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-02-24 9:07 ` [PATCH 85/89] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-02-24 9:07 ` [PATCH 86/89] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-03-16 12:54 ` Nicolas Saenz Julienne
2020-02-24 9:07 ` [PATCH 87/89] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-03-17 18:25 ` Daniel Rodriguez
2020-02-24 9:07 ` [PATCH 88/89] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-02-25 18:24 ` Rob Herring
2020-02-24 9:07 ` [PATCH 89/89] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-03-05 10:00 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Jian-Hong Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.6c896ace9a5a7840e9cec008b553cbb004ca1f91.1582533919.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).