DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Xin Ji <xji@analogixsemi.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>,
	Neil Armstrong <narmstrong@baylibre.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	Dan Carpenter <dan.carpenter@oracle.com>,
	Sheng Pan <span@analogixsemi.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding
Date: Mon, 14 Oct 2019 03:02:48 +0000
Message-ID: <20191014030238.GB2390@xin-VirtualBox> (raw)
In-Reply-To: <20191011125418.GE4882@pendragon.ideasonboard.com>

Hi Laurent Pinchart, please check my comment below.

Thanks,
Xin

On Fri, Oct 11, 2019 at 03:54:18PM +0300, Laurent Pinchart wrote:
> Hi Andrzej,
> 
> On Fri, Oct 11, 2019 at 01:21:43PM +0200, Andrzej Hajda wrote:
> > On 11.10.2019 04:21, Xin Ji wrote:
> > > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> > > for portable device. It converts MIPI to DisplayPort 1.3 4K.
> > >
> > > You can add support to your board with binding.
> > >
> > > Example:
> > > 	anx7625_bridge: encoder@58 {
> > > 		compatible = "analogix,anx7625";
> > > 		reg = <0x58>;
> > > 		status = "okay";
> > > 		panel-flags = <1>;
> > > 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> > > 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> > > 		#address-cells = <1>;
> > > 		#size-cells = <0>;
> > >
> > > 		port@0 {
> > > 		  reg = <0>;
> > > 		  anx_1_in: endpoint {
> > > 		    remote-endpoint = <&mipi_dsi>;
> > > 		  };
> > > 		};
> > >
> > > 		port@3 {
> > > 		  reg = <3>;
> > > 		  anx_1_out: endpoint {
> > > 		    remote-endpoint = <&panel_in>;
> > > 		  };
> > > 		};
> > > 	};
> > >
> > > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > > ---
> > >  .../bindings/display/bridge/anx7625.yaml           | 96 ++++++++++++++++++++++
> > >  1 file changed, 96 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> > > new file mode 100644
> > > index 0000000..fc84683
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> > > @@ -0,0 +1,96 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +# Copyright 2019 Analogix Semiconductor, Inc.
> > > +%YAML 1.2
> > > +---
> > > +$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#"
> > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > > +
> > > +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
> > > +
> > > +maintainers:
> > > +  - Xin Ji <xji@analogixsemi.com>
> > > +
> > > +description: |
> > > +  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> > > +  designed for portable devices.
> > > +
> > > +properties:
> > > +  "#address-cells": true
> > > +  "#size-cells": true
> > > +
> > > +  compatible:
> > > +    items:
> > > +      - const: analogix,anx7625
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  panel-flags:
> > > +    description: indicate the panel is internal or external
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  enable-gpios:
> > > +    description: used for power on chip control, POWER_EN pin D2.
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    description: used for reset chip control, RESET_N pin B7.
> > > +    maxItems: 1
> > > +
> > > +  port@0:
> > > +    type: object
> > > +    description:
> > > +      A port node pointing to MIPI DSI host port node.
> > > +
> > > +  port@1:
> > > +    type: object
> > > +    description:
> > > +      A port node pointing to MIPI DPI host port node.
> > > +
> > > +  port@2:
> > > +    type: object
> > > +    description:
> > > +      A port node pointing to external connector port node.
> > > +
> > > +  port@3:
> > > +    type: object
> > > +    description:
> > > +      A port node pointing to eDP port node.
> > 
> > 
> > Decrypting available product brief[1], there are following physical lines:
> > 
> > Input:
> > 
> > - MIPI DSI/DPI - video data, are DSI and DPI lines shared?
> 
> It would be much easier if we could have access to more complete
> information. I believe the DSI and DPI pins could be muxed, but there
> should be more DPI pins than DSI pins.
Yes DPI pins more than DSI pins.
> 
> > 
> > - I2S - audio data,
> > 
> > - I2C - control line,
> > 
> > - ALERT/INTP - interrupt,
> > 
> > - USB 3.1 SSRc/Tx - for USB forwarding,
> > 
> > Output:
> > 
> > - SS1, SS2,
> > 
> > - SBU/AUX,
> > 
> > - CC1/2.
> > 
> > 
> > Having this information I try to understand ports defined by you:
> > 
> > - port@2 you have defined as pointing to external port, but here the
> > port should be rather subnode of ANX7625 - the chip has CC lines, see
> > beginning of [2].
> > 
> > - port@3 describes SS1, SS2 and SBU/AUX lines together, am I right? In
> > USB-C binding SBU and SS lines are represented by different ports,
> > different approach, but maybe better in this case.
> 
> I believe that, when connected to a DP display (either DP or eDP), the
> DisplayPort signals are output on SS1 and/or SS2. I this really wonder
> if we need two separate ports for this, it seems that port@2 and port@3
> should be merged.
OK, I will merge the port@2 and port@3, and use a flag to indicate
whether the control is external connector control or not.
> 
> > Maybe it would be good to add 2nd example with USB-C port.
> 
> That would help with the discussion, yes.
As we disabled USB-C feature in anx7625, we cannot define a USB-C port.
> 
> > [1]:
> > https://www.analogix.com/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf
> > 
> > [2]: Documentation/devicetree/bindings/connector/usb-connector.txt
> > 
> > > +
> > > +required:
> > > +  - "#address-cells"
> > > +  - "#size-cells"
> > > +  - compatible
> > > +  - reg
> > > +  - port@0
> > > +  - port@3
> > > +
> > > +example:
> > > +  - |
> > > +    anx7625_bridge: encoder@58 {
> > > +        compatible = "analogix,anx7625";
> > > +        reg = <0x58>;
> > > +        status = "okay";
> > > +        panel-flags = <1>;
> > > +        enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> > > +        reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        port@0 {
> > > +          reg = <0>;
> > > +          anx_1_in: endpoint {
> > > +            remote-endpoint = <&mipi_dsi>;
> > > +          };
> > > +        };
> > > +
> > > +        port@3 {
> > > +          reg = <3>;
> > > +          anx_1_out: endpoint {
> > > +            remote-endpoint = <&panel_in>;
> > > +          };
> > > +        };
> > > +    };
> 
> -- 
> Regards,
> 
> Laurent Pinchart
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20191011022055epcas5p37790ed31cbe63d0be0f6b5786ce1392a@epcas5p3.samsung.com>
2019-10-11  2:20 ` [PATCH v2 0/2] Add initial support for slimport anx7625 Xin Ji
2019-10-11  2:21   ` [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji
2019-10-11 11:21     ` Andrzej Hajda
2019-10-11 12:54       ` Laurent Pinchart
2019-10-14  3:02         ` Xin Ji [this message]
2019-10-14 22:16           ` Laurent Pinchart
2019-10-15  3:02             ` Xin Ji
2019-10-14  2:53       ` Xin Ji
2019-10-11  2:23   ` [PATCH v2 2/2] drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP bridge driver Xin Ji
2019-10-14  8:20     ` kbuild test robot
2019-10-14  8:20     ` [RFC PATCH] drm/bridge: anx7625: ANX_OUI[] can be static kbuild test robot
2019-10-15  9:19     ` [PATCH v2 2/2] drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP bridge driver Dan Carpenter
2019-10-11  6:12   ` [PATCH v2 0/2] Add initial support for slimport anx7625 Andrzej Hajda
2019-10-11  7:52     ` Xin Ji
2019-10-11 10:27   ` Dan Carpenter
2019-10-10  9:31 Xin Ji
2019-10-10  9:32 ` [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji
  -- strict thread matches above, loose matches on Subject: below --
2019-10-09  9:26 [PATCH v2 0/2] Add initial support for slimport anx7625 Xin Ji
2019-10-09  9:27 ` [PATCH v2 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji
2019-10-09 12:10   ` Laurent Pinchart
2019-10-10  3:38     ` Xin Ji

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191014030238.GB2390@xin-VirtualBox \
    --to=xji@analogixsemi.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=dan.carpenter@oracle.com \
    --cc=daniel@ffwll.ch \
    --cc=devel@driverdev.osuosl.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=span@analogixsemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git