DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] FBTFT: fb_sh: Changed udelay() to usleep_range() based on the Document, Documentation/timers/timers-howto.rst Excerpt from the document: -SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms): * Use usleep_range
@ 2019-11-03  0:59 rama
  2019-11-03 12:35 ` Greg KH
  0 siblings, 1 reply; 2+ messages in thread
From: rama @ 2019-11-03  0:59 UTC (permalink / raw)
  To: gregkh; +Cc: devel, rama, linux-kernel, nishadkamdar

---
 drivers/staging/fbtft/fb_agm1264k-fl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index eeeeec97ad27..471a145e3c00 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -85,7 +85,7 @@ static void reset(struct fbtft_par *par)
 	dev_dbg(par->info->device, "%s()\n", __func__);
 
 	gpiod_set_value(par->gpio.reset, 0);
-	udelay(20);
+	usleep_range(20,20);
 	gpiod_set_value(par->gpio.reset, 1);
 	mdelay(120);
 }
-- 
2.17.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] FBTFT: fb_sh: Changed udelay() to usleep_range() based on the Document, Documentation/timers/timers-howto.rst Excerpt from the document: -SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms): * Use usleep_range
  2019-11-03  0:59 [PATCH] FBTFT: fb_sh: Changed udelay() to usleep_range() based on the Document, Documentation/timers/timers-howto.rst Excerpt from the document: -SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms): * Use usleep_range rama
@ 2019-11-03 12:35 ` Greg KH
  0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2019-11-03 12:35 UTC (permalink / raw)
  To: rama; +Cc: devel, linux-kernel, nishadkamdar

On Sat, Nov 02, 2019 at 07:59:06PM -0500, rama wrote:
> ---
>  drivers/staging/fbtft/fb_agm1264k-fl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch does not have a Signed-off-by: line.  Please read the
  kernel file, Documentation/SubmittingPatches and resend it after
  adding that line.  Note, the line needs to be in the body of the
  email, before the patch, not at the bottom of the patch or in the
  email signature.

- You did not specify a description of why the patch is needed, or
  possibly, any description at all, in the email body.  Please read the
  section entitled "The canonical patch format" in the kernel file,
  Documentation/SubmittingPatches for what is needed in order to
  properly describe the change.

- You did not write a descriptive Subject: for the patch, allowing Greg,
  and everyone else, to know what this patch is all about.  Please read
  the section entitled "The canonical patch format" in the kernel file,
  Documentation/SubmittingPatches for what a proper Subject: line should
  look like.

- It looks like you did not use your "real" name for the patch on either
  the Signed-off-by: line, or the From: line (both of which have to
  match).  Please read the kernel file, Documentation/SubmittingPatches
  for how to do this correctly.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-03  0:59 [PATCH] FBTFT: fb_sh: Changed udelay() to usleep_range() based on the Document, Documentation/timers/timers-howto.rst Excerpt from the document: -SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms): * Use usleep_range rama
2019-11-03 12:35 ` Greg KH

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git