DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] staging: pi433: Fix Kconfig indentation
@ 2019-11-20 13:38 Krzysztof Kozlowski
  0 siblings, 0 replies; only message in thread
From: Krzysztof Kozlowski @ 2019-11-20 13:38 UTC (permalink / raw)
  To: linux-kernel; +Cc: devel, Greg Kroah-Hartman, Krzysztof Kozlowski

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/staging/pi433/Kconfig | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/pi433/Kconfig b/drivers/staging/pi433/Kconfig
index 8acde0814206..dd9e4709d1a8 100644
--- a/drivers/staging/pi433/Kconfig
+++ b/drivers/staging/pi433/Kconfig
@@ -1,17 +1,17 @@
 # SPDX-License-Identifier: GPL-2.0
 config PI433
-        tristate "Pi433 - a 433MHz radio module for Raspberry Pi"
-        depends on SPI
-        help
-          This option allows you to enable support for the radio module Pi433.
+	tristate "Pi433 - a 433MHz radio module for Raspberry Pi"
+	depends on SPI
+	help
+	  This option allows you to enable support for the radio module Pi433.
 
-          Pi433 is a shield that fits onto the GPIO header of a Raspberry Pi
-          or compatible. It extends the Raspberry Pi with the option, to
-          send and receive data in the 433MHz ISM band - for example to
-          communicate between two systems without using ethernet or bluetooth
-          or for control or read sockets, actors, sensors, widely available
-          for low price.
+	  Pi433 is a shield that fits onto the GPIO header of a Raspberry Pi
+	  or compatible. It extends the Raspberry Pi with the option, to
+	  send and receive data in the 433MHz ISM band - for example to
+	  communicate between two systems without using ethernet or bluetooth
+	  or for control or read sockets, actors, sensors, widely available
+	  for low price.
 
-          For details or the option to buy, please visit https://pi433.de/en.html
+	  For details or the option to buy, please visit https://pi433.de/en.html
 
-          If in doubt, say N here, but saying yes most probably won't hurt
+	  If in doubt, say N here, but saying yes most probably won't hurt
-- 
2.17.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-20 13:38 [PATCH] staging: pi433: Fix Kconfig indentation Krzysztof Kozlowski

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git