DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] rtl8723bs: Fix spelling errors
@ 2019-11-29  9:39 Andreas Hellmich
  2019-11-29  9:39 ` [PATCH 2/2] rtl8723bs: Fix line length Andreas Hellmich
  0 siblings, 1 reply; 2+ messages in thread
From: Andreas Hellmich @ 2019-11-29  9:39 UTC (permalink / raw)
  To: gregkh, devel; +Cc: Andreas Hellmich, Annika Knepper, linux-kernel

Fix spelling errors.

Co-developed-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Andreas Hellmich <dy26hofu@stud.informatik.uni-erlangen.de>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 36 +++++++++----------
 .../staging/rtl8723bs/hal/HalPhyRf_8723B.c    |  6 ++--
 .../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 14 ++++----
 3 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index 5e687f6d2c3e..81062ec3f086 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -207,7 +207,7 @@ static RT_CHANNEL_PLAN_MAP	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
 	{0x02, 0x1F},	/* 0x57, RT_CHANNEL_DOMAIN_FCC1_FCC10 */
 };
 
-static RT_CHANNEL_PLAN_MAP	RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the conbination for max channel numbers */
+static RT_CHANNEL_PLAN_MAP	RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the combination for max channel numbers */
 
 /*
  * Search the @param ch in given @param ch_set
@@ -2265,7 +2265,7 @@ inline struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
 
 /****************************************************************************
 
-Following are some TX fuctions for WiFi MLME
+Following are some TX functions for WiFi MLME
 
 *****************************************************************************/
 
@@ -2956,7 +2956,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
 	return ret;
 }
 
-/*  if psta == NULL, indiate we are station(client) now... */
+/*  if psta == NULL, indicate we are station(client) now... */
 void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
 {
 	struct xmit_frame			*pmgntframe;
@@ -3358,7 +3358,7 @@ void issue_assocreq(struct adapter *padapter)
 				if ((!padapter->registrypriv.wifi_spec) && (!memcmp(pIE->data, WPS_OUI, 4))) {
 					/* Commented by Kurt 20110629 */
 					/* In some older APs, WPS handshake */
-					/* would be fail if we append vender extensions informations to AP */
+					/* would be fail if we append vender extensions information to AP */
 
 					vs_ie_length = 14;
 				}
@@ -3406,7 +3406,7 @@ void issue_assocreq(struct adapter *padapter)
 		rtw_buf_free(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len);
 }
 
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_nulldata(struct adapter *padapter, unsigned char *da,
 			   unsigned int power_mode, bool wait_ack)
 {
@@ -3481,7 +3481,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da,
 /*
  * [IMPORTANT] Don't call this function in interrupt context
  *
- * When wait_ms > 0, this function shoule be called at process context
+ * When wait_ms > 0, this function should be called at process context
  * da == NULL for station mode
  */
 int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
@@ -3493,7 +3493,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
 	struct sta_info *psta;
 
 
-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&(pmlmeinfo->network));
 
@@ -3558,14 +3558,14 @@ s32 issue_nulldata_in_interrupt(struct adapter *padapter, u8 *da)
 	pmlmeext = &padapter->mlmeextpriv;
 	pmlmeinfo = &pmlmeext->mlmext_info;
 
-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&(pmlmeinfo->network));
 
 	return _issue_nulldata(padapter, da, 0, false);
 }
 
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
 			       u16 tid, bool wait_ack)
 {
@@ -3644,7 +3644,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
 	return ret;
 }
 
-/* when wait_ms >0 , this function shoule be called at process context */
+/* when wait_ms >0 , this function should be called at process context */
 /* da == NULL for station mode */
 int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
 {
@@ -3653,7 +3653,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
 	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
 	struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
 
-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&(pmlmeinfo->network));
 
@@ -4264,7 +4264,7 @@ unsigned int send_beacon(struct adapter *padapter)
 
 /****************************************************************************
 
-Following are some utitity fuctions for WiFi MLME
+Following are some utility functions for WiFi MLME
 
 *****************************************************************************/
 
@@ -4568,7 +4568,7 @@ u8 collect_bss_info(struct adapter *padapter, union recv_frame *precv_frame, str
 	}
 	#endif
 
-	/*  mark bss info receving from nearby channel as SignalQuality 101 */
+	/*  mark bss info receiving from nearby channel as SignalQuality 101 */
 	if (bssid->Configuration.DSConfig != rtw_get_oper_ch(padapter))
 		bssid->PhyInfo.SignalQuality = 101;
 
@@ -4589,7 +4589,7 @@ void start_create_ibss(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);
 
-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps&cap_IBSS) {/* adhoc master */
@@ -4644,7 +4644,7 @@ void start_clnt_join(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);
 
-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps&cap_ESS) {
@@ -5441,7 +5441,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
 	/* turn on dynamic functions */
 	Switch_DM_Func(padapter, DYNAMIC_ALL_FUNC_ENABLE, true);
 
-	/*  update IOT-releated issue */
+	/*  update IOT-related issue */
 	update_IOT_info(padapter);
 
 	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, cur_network->SupportedRates);
@@ -5449,7 +5449,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
 	/* BCN interval */
 	rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&pmlmeinfo->bcn_interval));
 
-	/* udpate capability */
+	/* update capability */
 	update_capinfo(padapter, pmlmeinfo->capability);
 
 	/* WMM, Update EDCA param */
@@ -6385,7 +6385,7 @@ u8 sitesurvey_cmd_hdl(struct adapter *padapter, u8 *pbuf)
 		Save_DM_Func_Flag(padapter);
 		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
 
-		/* config the initial gain under scaning, need to write the BB registers */
+		/* config the initial gain under scanning, need to write the BB registers */
 		initialgain = 0x1e;
 
 		rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
diff --git a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
index 1ca9063a269f..106bfd670701 100644
--- a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
+++ b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
@@ -82,7 +82,7 @@ static void setIqkMatrix_8723B(
 		/* if (RFPath == ODM_RF_PATH_A) */
 		switch (RFPath) {
 		case ODM_RF_PATH_A:
-			/* wirte new elements A, C, D to regC80 and regC94, element B is always 0 */
+			/* write new elements A, C, D to regC80 and regC94, element B is always 0 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32);
 
@@ -93,7 +93,7 @@ static void setIqkMatrix_8723B(
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_ECCAThreshold, BIT24, value32);
 			break;
 		case ODM_RF_PATH_B:
-			/* wirte new elements A, C, D to regC88 and regC9C, element B is always 0 */
+			/* write new elements A, C, D to regC88 and regC9C, element B is always 0 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32);
 
@@ -166,7 +166,7 @@ void DoIQK_8723B(
 /*-----------------------------------------------------------------------------
  * Function:	odm_TxPwrTrackSetPwr88E()
  *
- * Overview:	88E change all channel tx power accordign to flag.
+ * Overview:	88E change all channel tx power according to flag.
  *			OFDM & CCK are all different.
  *
  * Input:		NONE
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 66127f6c8e4d..06c22ccfb2fd 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -750,7 +750,7 @@ static void Hal_BT_EfusePowerSwitch(
 		rtw_write8(padapter, 0x6B, tempval);
 
 		/*  Attention!! Between 0x6A[14] and 0x6A[15] setting need 100us delay */
-		/*  So don't wirte 0x6A[14]= 1 and 0x6A[15]= 0 together! */
+		/*  So don't write 0x6A[14]= 1 and 0x6A[15]= 0 together! */
 		msleep(1);
 		/*  disable BT output isolation */
 		/*  0x6A[15] = 0 */
@@ -765,7 +765,7 @@ static void Hal_BT_EfusePowerSwitch(
 		rtw_write8(padapter, 0x6B, tempval);
 
 		/*  Attention!! Between 0x6A[14] and 0x6A[15] setting need 100us delay */
-		/*  So don't wirte 0x6A[14]= 1 and 0x6A[15]= 0 together! */
+		/*  So don't write 0x6A[14]= 1 and 0x6A[15]= 0 together! */
 
 		/*  disable BT power cut */
 		/*  0x6A[14] = 1 */
@@ -1231,7 +1231,7 @@ static u16 hal_EfuseGetCurrentSize_WiFi(
 	goto exit;
 
 error:
-	/*  report max size to prevent wirte efuse */
+	/*  report max size to prevent write efuse */
 	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, &efuse_addr, bPseudoTest);
 
 exit:
@@ -2237,7 +2237,7 @@ void rtl8723b_InitAntenna_Selection(struct adapter *padapter)
 	u8 val;
 
 	val = rtw_read8(padapter, REG_LEDCFG2);
-	/*  Let 8051 take control antenna settting */
+	/*  Let 8051 take control antenna setting */
 	val |= BIT(7); /*  DPDT_SEL_EN, 0x4C[23] */
 	rtw_write8(padapter, REG_LEDCFG2, val);
 }
@@ -3193,7 +3193,7 @@ static void rtl8723b_fill_default_txdesc(
 
 	/*  2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
 	/*  (1) The sequence number of each non-Qos frame / broadcast / multicast / */
-	/*  mgnt frame should be controled by Hw because Fw will also send null data */
+	/*  mgnt frame should be controlled by Hw because Fw will also send null data */
 	/*  which we cannot control when Fw LPS enable. */
 	/*  --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
 	/*  (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
@@ -3543,7 +3543,7 @@ static void hw_var_set_mlme_sitesurvey(struct adapter *padapter, u8 variable, u8
 			rtw_write8(padapter, reg_bcn_ctl, val8);
 		}
 
-		/*  Save orignal RRSR setting. */
+		/*  Save original RRSR setting. */
 		pHalData->RegRRSR = rtw_read16(padapter, REG_RRSR);
 	} else {
 		/*  sitesurvey done */
@@ -3561,7 +3561,7 @@ static void hw_var_set_mlme_sitesurvey(struct adapter *padapter, u8 variable, u8
 		value_rcr |= rcr_clear_bit;
 		rtw_write32(padapter, REG_RCR, value_rcr);
 
-		/*  Restore orignal RRSR setting. */
+		/*  Restore original RRSR setting. */
 		rtw_write16(padapter, REG_RRSR, pHalData->RegRRSR);
 	}
 }
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH 2/2] rtl8723bs: Fix line length
  2019-11-29  9:39 [PATCH 1/2] rtl8723bs: Fix spelling errors Andreas Hellmich
@ 2019-11-29  9:39 ` Andreas Hellmich
  0 siblings, 0 replies; 2+ messages in thread
From: Andreas Hellmich @ 2019-11-29  9:39 UTC (permalink / raw)
  To: gregkh, devel; +Cc: Andreas Hellmich, Annika Knepper, linux-kernel

Fix some line length errors.

Co-developed-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Andreas Hellmich <dy26hofu@stud.informatik.uni-erlangen.de>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 24 +++++++-------
 .../staging/rtl8723bs/hal/HalPhyRf_8723B.c    | 10 ++++--
 .../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 32 ++++++++++---------
 3 files changed, 37 insertions(+), 29 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index 81062ec3f086..c642825ca8ef 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -207,10 +207,10 @@ static RT_CHANNEL_PLAN_MAP	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
 	{0x02, 0x1F},	/* 0x57, RT_CHANNEL_DOMAIN_FCC1_FCC10 */
 };
 
-static RT_CHANNEL_PLAN_MAP	RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the combination for max channel numbers */
+ /* use the combination for max channel numbers */
+static RT_CHANNEL_PLAN_MAP RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02};
 
-/*
- * Search the @param ch in given @param ch_set
+/* Search the @param ch in given @param ch_set
  * @ch_set: the given channel set
  * @ch: the given channel number
  *
@@ -229,8 +229,7 @@ int rtw_ch_set_search_ch(RT_CHANNEL_INFO *ch_set, const u32 ch)
 	return i;
 }
 
-/*
- * Check the @param ch is fit with setband setting of @param adapter
+/* Check the @param ch is fit with setband setting of @param adapter
  * @adapter: the given adapter
  * @ch: the given channel number
  *
@@ -3356,9 +3355,11 @@ void issue_assocreq(struct adapter *padapter)
 					(!memcmp(pIE->data, WPS_OUI, 4))) {
 				vs_ie_length = pIE->Length;
 				if ((!padapter->registrypriv.wifi_spec) && (!memcmp(pIE->data, WPS_OUI, 4))) {
-					/* Commented by Kurt 20110629 */
-					/* In some older APs, WPS handshake */
-					/* would be fail if we append vender extensions information to AP */
+					/* Commented by Kurt 20110629
+					 * In some older APs, WPS handshake
+					 * would be fail if we append vendor
+					 * extensions information to AP
+					 */
 
 					vs_ie_length = 14;
 				}
@@ -5379,8 +5380,7 @@ static void rtw_mlmeext_disconnect(struct adapter *padapter)
 
 	/* set_opmode_cmd(padapter, infra_client_with_mlme); */
 
-	/*
-	 * For safety, prevent from keeping macid sleep.
+	/* For safety, prevent from keeping macid sleep.
 	 * If we can sure all power mode enter/leave are paired,
 	 * this check can be removed.
 	 * Lucas@20131113
@@ -6385,7 +6385,9 @@ u8 sitesurvey_cmd_hdl(struct adapter *padapter, u8 *pbuf)
 		Save_DM_Func_Flag(padapter);
 		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
 
-		/* config the initial gain under scanning, need to write the BB registers */
+		/* config the initial gain under scanning, need to write the BB
+		 * registers
+		 */
 		initialgain = 0x1e;
 
 		rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
diff --git a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
index 106bfd670701..338dd0b7a6eb 100644
--- a/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
+++ b/drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
+/*****************************************************************************
  *
  * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
  *
@@ -82,7 +82,9 @@ static void setIqkMatrix_8723B(
 		/* if (RFPath == ODM_RF_PATH_A) */
 		switch (RFPath) {
 		case ODM_RF_PATH_A:
-			/* write new elements A, C, D to regC80 and regC94, element B is always 0 */
+			/* write new elements A, C, D to regC80 and regC94,
+			 * element B is always 0
+			 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32);
 
@@ -93,7 +95,9 @@ static void setIqkMatrix_8723B(
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_ECCAThreshold, BIT24, value32);
 			break;
 		case ODM_RF_PATH_B:
-			/* write new elements A, C, D to regC88 and regC9C, element B is always 0 */
+			/* write new elements A, C, D to regC88 and regC9C,
+			 * element B is always 0
+			 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32);
 
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 06c22ccfb2fd..de8caa6cd418 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -3191,22 +3191,26 @@ static void rtl8723b_fill_default_txdesc(
 	if (bmcst)
 		ptxdesc->bmc = 1;
 
-	/*  2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
-	/*  (1) The sequence number of each non-Qos frame / broadcast / multicast / */
-	/*  mgnt frame should be controlled by Hw because Fw will also send null data */
-	/*  which we cannot control when Fw LPS enable. */
-	/*  --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
-	/*  (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
-	/*  (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */
-	/*  2010.06.23. Added by tynli. */
+	/* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
+	 * (1) The sequence number of each non-Qos frame / broadcast /
+	 * multicast / mgnt frame should be controlled by Hw because Fw
+	 * will also send null data which we cannot control when Fw LPS
+	 * enable.
+	 * --> default enable non-Qos data sequense number. 2010.06.23.
+	 * by tynli.
+	 * (2) Enable HW SEQ control for beacon packet, because we use
+	 * Hw beacon.
+	 * (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos
+	 * packets.
+	 * 2010.06.23. Added by tynli.
+	 */
 	if (!pattrib->qos_en) /*  Hw set sequence number */
 		ptxdesc->en_hwseq = 1; /*  HWSEQ_EN */
 }
 
-/*
- *Description:
+/* Description:
  *
- *Parameters:
+ * Parameters:
  *	pxmitframe	xmitframe
  *	pbuf		where to fill tx desc
  */
@@ -4329,8 +4333,7 @@ void GetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
 	}
 }
 
-/*
- *Description:
+/* Description:
  *	Change default setting of specified variable.
  */
 u8 SetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)
@@ -4348,8 +4351,7 @@ u8 SetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, v
 	return bResult;
 }
 
-/*
- *Description:
+/* Description:
  *	Query setting of specified variable.
  */
 u8 GetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-29  9:39 [PATCH 1/2] rtl8723bs: Fix spelling errors Andreas Hellmich
2019-11-29  9:39 ` [PATCH 2/2] rtl8723bs: Fix line length Andreas Hellmich

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git