DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ian Abbott <abbotti@mev.co.uk>,
	devel@driverdev.osuosl.org,
	"Spencer E. Olson" <olsonse@umich.edu>
Subject: [PATCH AUTOSEL 4.4 005/174] staging: comedi: ni_mio_common: protect register write overflow
Date: Thu, 16 Jan 2020 12:40:02 -0500
Message-ID: <20200116174251.24326-5-sashal@kernel.org> (raw)
In-Reply-To: <20200116174251.24326-1-sashal@kernel.org>

From: "Spencer E. Olson" <olsonse@umich.edu>

[ Upstream commit 1cbca5852d6c16e85a21487a15d211195aacd4a1 ]

Fixes two problems introduced as early as
commit 03aef4b6dc12  ("Staging: comedi: add ni_mio_common code"):
(1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is
    not unduly overwritten on e-series devices.  On e-series devices, the
    first three of the last four bits are reserved.  The last bit defines
    the output selection of the RGOUT0 pin, otherwise known as
    RTSI_Sub_Selection.  For m-series devices, these last four bits are
    indeed used as the output selection of the RTSI7 pin (and the
    RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the
    RTSI_Trig_Direction register.
(2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI
    lines.

This patch also cleans up the ni_get_rtsi_routing command for readability.

Fixes: 03aef4b6dc12  ("Staging: comedi: add ni_mio_common code")
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../staging/comedi/drivers/ni_mio_common.c    | 24 +++++++++++++------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 619c989c5f37..d682907c146a 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -4809,7 +4809,10 @@ static int ni_valid_rtsi_output_source(struct comedi_device *dev,
 	case NI_RTSI_OUTPUT_G_SRC0:
 	case NI_RTSI_OUTPUT_G_GATE0:
 	case NI_RTSI_OUTPUT_RGOUT0:
-	case NI_RTSI_OUTPUT_RTSI_BRD_0:
+	case NI_RTSI_OUTPUT_RTSI_BRD(0):
+	case NI_RTSI_OUTPUT_RTSI_BRD(1):
+	case NI_RTSI_OUTPUT_RTSI_BRD(2):
+	case NI_RTSI_OUTPUT_RTSI_BRD(3):
 		return 1;
 	case NI_RTSI_OUTPUT_RTSI_OSC:
 		return (devpriv->is_m_series) ? 1 : 0;
@@ -4830,11 +4833,18 @@ static int ni_set_rtsi_routing(struct comedi_device *dev,
 		devpriv->rtsi_trig_a_output_reg |= NISTC_RTSI_TRIG(chan, src);
 		ni_stc_writew(dev, devpriv->rtsi_trig_a_output_reg,
 			      NISTC_RTSI_TRIGA_OUT_REG);
-	} else if (chan < 8) {
+	} else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) {
 		devpriv->rtsi_trig_b_output_reg &= ~NISTC_RTSI_TRIG_MASK(chan);
 		devpriv->rtsi_trig_b_output_reg |= NISTC_RTSI_TRIG(chan, src);
 		ni_stc_writew(dev, devpriv->rtsi_trig_b_output_reg,
 			      NISTC_RTSI_TRIGB_OUT_REG);
+	} else if (chan != NISTC_RTSI_TRIG_OLD_CLK_CHAN) {
+		/* probably should never reach this, since the
+		 * ni_valid_rtsi_output_source above errors out if chan is too
+		 * high
+		 */
+		dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+		return -EINVAL;
 	}
 	return 2;
 }
@@ -4849,12 +4859,12 @@ static unsigned ni_get_rtsi_routing(struct comedi_device *dev, unsigned chan)
 	} else if (chan < NISTC_RTSI_TRIG_NUM_CHAN(devpriv->is_m_series)) {
 		return NISTC_RTSI_TRIG_TO_SRC(chan,
 					      devpriv->rtsi_trig_b_output_reg);
-	} else {
-		if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN)
-			return NI_RTSI_OUTPUT_RTSI_OSC;
-		dev_err(dev->class_dev, "bug! should never get here?\n");
-		return 0;
+	} else if (chan == NISTC_RTSI_TRIG_OLD_CLK_CHAN) {
+		return NI_RTSI_OUTPUT_RTSI_OSC;
 	}
+
+	dev_err(dev->class_dev, "%s: unknown rtsi channel\n", __func__);
+	return -EINVAL;
 }
 
 static int ni_rtsi_insn_config(struct comedi_device *dev,
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

           reply index

Thread overview: expand[flat|nested]  mbox.gz  Atom feed
 [parent not found: <20200116174251.24326-1-sashal@kernel.org>]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116174251.24326-5-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=abbotti@mev.co.uk \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olsonse@umich.edu \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git