DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
	Ajay.Kathat@microchip.com, Venkateswara.Kaja@microchip.com,
	gregkh@linuxfoundation.org, Nicolas.Ferre@microchip.com,
	Adham.Abozaeid@microchip.com, johannes@sipsolutions.net
Subject: [PATCH v6 10/17] wilc1000: add mon.c
Date: Fri, 27 Mar 2020 06:33:15 +0000
Message-ID: <20200327063302.20511-11-ajay.kathat@microchip.com> (raw)
In-Reply-To: <20200327063302.20511-1-ajay.kathat@microchip.com>

From: Ajay Singh <ajay.kathat@microchip.com>

Moved 'drivers/staging/wilc1000/mon.c' to
'drivers/net/wireless/microchip/wilc1000/mon.c'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 drivers/net/wireless/microchip/wilc1000/mon.c | 260 ++++++++++++++++++
 1 file changed, 260 insertions(+)
 create mode 100644 drivers/net/wireless/microchip/wilc1000/mon.c

diff --git a/drivers/net/wireless/microchip/wilc1000/mon.c b/drivers/net/wireless/microchip/wilc1000/mon.c
new file mode 100644
index 000000000000..60331417bd98
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/mon.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#include "cfg80211.h"
+
+struct wilc_wfi_radiotap_hdr {
+	struct ieee80211_radiotap_header hdr;
+	u8 rate;
+} __packed;
+
+struct wilc_wfi_radiotap_cb_hdr {
+	struct ieee80211_radiotap_header hdr;
+	u8 rate;
+	u8 dump;
+	u16 tx_flags;
+} __packed;
+
+#define TX_RADIOTAP_PRESENT ((1 << IEEE80211_RADIOTAP_RATE) |	\
+			     (1 << IEEE80211_RADIOTAP_TX_FLAGS))
+
+void wilc_wfi_monitor_rx(struct net_device *mon_dev, u8 *buff, u32 size)
+{
+	u32 header, pkt_offset;
+	struct sk_buff *skb = NULL;
+	struct wilc_wfi_radiotap_hdr *hdr;
+	struct wilc_wfi_radiotap_cb_hdr *cb_hdr;
+
+	if (!mon_dev)
+		return;
+
+	if (!netif_running(mon_dev))
+		return;
+
+	/* Get WILC header */
+	header = get_unaligned_le32(buff - HOST_HDR_OFFSET);
+	/*
+	 * The packet offset field contain info about what type of management
+	 * the frame we are dealing with and ack status
+	 */
+	pkt_offset = FIELD_GET(WILC_PKT_HDR_OFFSET_FIELD, header);
+
+	if (pkt_offset & IS_MANAGMEMENT_CALLBACK) {
+		/* hostapd callback mgmt frame */
+
+		skb = dev_alloc_skb(size + sizeof(*cb_hdr));
+		if (!skb)
+			return;
+
+		skb_put_data(skb, buff, size);
+
+		cb_hdr = skb_push(skb, sizeof(*cb_hdr));
+		memset(cb_hdr, 0, sizeof(*cb_hdr));
+
+		cb_hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */
+
+		cb_hdr->hdr.it_len = cpu_to_le16(sizeof(*cb_hdr));
+
+		cb_hdr->hdr.it_present = cpu_to_le32(TX_RADIOTAP_PRESENT);
+
+		cb_hdr->rate = 5;
+
+		if (pkt_offset & IS_MGMT_STATUS_SUCCES)	{
+			/* success */
+			cb_hdr->tx_flags = IEEE80211_RADIOTAP_F_TX_RTS;
+		} else {
+			cb_hdr->tx_flags = IEEE80211_RADIOTAP_F_TX_FAIL;
+		}
+
+	} else {
+		skb = dev_alloc_skb(size + sizeof(*hdr));
+
+		if (!skb)
+			return;
+
+		skb_put_data(skb, buff, size);
+		hdr = skb_push(skb, sizeof(*hdr));
+		memset(hdr, 0, sizeof(struct wilc_wfi_radiotap_hdr));
+		hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */
+		hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr));
+		hdr->hdr.it_present = cpu_to_le32
+				(1 << IEEE80211_RADIOTAP_RATE);
+		hdr->rate = 5;
+	}
+
+	skb->dev = mon_dev;
+	skb_reset_mac_header(skb);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = htons(ETH_P_802_2);
+	memset(skb->cb, 0, sizeof(skb->cb));
+
+	netif_rx(skb);
+}
+
+struct tx_complete_mon_data {
+	int size;
+	void *buff;
+};
+
+static void mgmt_tx_complete(void *priv, int status)
+{
+	struct tx_complete_mon_data *pv_data = priv;
+	/*
+	 * in case of fully hosting mode, the freeing will be done
+	 * in response to the cfg packet
+	 */
+	kfree(pv_data->buff);
+
+	kfree(pv_data);
+}
+
+static int mon_mgmt_tx(struct net_device *dev, const u8 *buf, size_t len)
+{
+	struct tx_complete_mon_data *mgmt_tx = NULL;
+
+	if (!dev)
+		return -EFAULT;
+
+	netif_stop_queue(dev);
+	mgmt_tx = kmalloc(sizeof(*mgmt_tx), GFP_ATOMIC);
+	if (!mgmt_tx)
+		return -ENOMEM;
+
+	mgmt_tx->buff = kmemdup(buf, len, GFP_ATOMIC);
+	if (!mgmt_tx->buff) {
+		kfree(mgmt_tx);
+		return -ENOMEM;
+	}
+
+	mgmt_tx->size = len;
+
+	wilc_wlan_txq_add_mgmt_pkt(dev, mgmt_tx, mgmt_tx->buff, mgmt_tx->size,
+				   mgmt_tx_complete);
+
+	netif_wake_queue(dev);
+	return 0;
+}
+
+static netdev_tx_t wilc_wfi_mon_xmit(struct sk_buff *skb,
+				     struct net_device *dev)
+{
+	u32 rtap_len, ret = 0;
+	struct wilc_wfi_mon_priv  *mon_priv;
+	struct sk_buff *skb2;
+	struct wilc_wfi_radiotap_cb_hdr *cb_hdr;
+	u8 srcadd[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+
+	mon_priv = netdev_priv(dev);
+	if (!mon_priv)
+		return -EFAULT;
+
+	rtap_len = ieee80211_get_radiotap_len(skb->data);
+	if (skb->len < rtap_len)
+		return -1;
+
+	skb_pull(skb, rtap_len);
+
+	if (skb->data[0] == 0xc0 && is_broadcast_ether_addr(&skb->data[4])) {
+		skb2 = dev_alloc_skb(skb->len + sizeof(*cb_hdr));
+		if (!skb2)
+			return -ENOMEM;
+
+		skb_put_data(skb2, skb->data, skb->len);
+
+		cb_hdr = skb_push(skb2, sizeof(*cb_hdr));
+		memset(cb_hdr, 0, sizeof(struct wilc_wfi_radiotap_cb_hdr));
+
+		cb_hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */
+
+		cb_hdr->hdr.it_len = cpu_to_le16(sizeof(*cb_hdr));
+
+		cb_hdr->hdr.it_present = cpu_to_le32(TX_RADIOTAP_PRESENT);
+
+		cb_hdr->rate = 5;
+		cb_hdr->tx_flags = 0x0004;
+
+		skb2->dev = dev;
+		skb_reset_mac_header(skb2);
+		skb2->ip_summed = CHECKSUM_UNNECESSARY;
+		skb2->pkt_type = PACKET_OTHERHOST;
+		skb2->protocol = htons(ETH_P_802_2);
+		memset(skb2->cb, 0, sizeof(skb2->cb));
+
+		netif_rx(skb2);
+
+		return 0;
+	}
+	skb->dev = mon_priv->real_ndev;
+
+	ether_addr_copy(srcadd, &skb->data[10]);
+	ether_addr_copy(bssid, &skb->data[16]);
+	/*
+	 * Identify if data or mgmt packet, if source address and bssid
+	 * fields are equal send it to mgmt frames handler
+	 */
+	if (!(memcmp(srcadd, bssid, 6))) {
+		ret = mon_mgmt_tx(mon_priv->real_ndev, skb->data, skb->len);
+		if (ret)
+			netdev_err(dev, "fail to mgmt tx\n");
+		dev_kfree_skb(skb);
+	} else {
+		ret = wilc_mac_xmit(skb, mon_priv->real_ndev);
+	}
+
+	return ret;
+}
+
+static const struct net_device_ops wilc_wfi_netdev_ops = {
+	.ndo_start_xmit         = wilc_wfi_mon_xmit,
+
+};
+
+struct net_device *wilc_wfi_init_mon_interface(struct wilc *wl,
+					       const char *name,
+					       struct net_device *real_dev)
+{
+	struct wilc_wfi_mon_priv *priv;
+
+	/* If monitor interface is already initialized, return it */
+	if (wl->monitor_dev)
+		return wl->monitor_dev;
+
+	wl->monitor_dev = alloc_etherdev(sizeof(struct wilc_wfi_mon_priv));
+	if (!wl->monitor_dev)
+		return NULL;
+
+	wl->monitor_dev->type = ARPHRD_IEEE80211_RADIOTAP;
+	strncpy(wl->monitor_dev->name, name, IFNAMSIZ);
+	wl->monitor_dev->name[IFNAMSIZ - 1] = 0;
+	wl->monitor_dev->netdev_ops = &wilc_wfi_netdev_ops;
+	wl->monitor_dev->needs_free_netdev = true;
+
+	if (register_netdevice(wl->monitor_dev)) {
+		netdev_err(real_dev, "register_netdevice failed\n");
+		return NULL;
+	}
+	priv = netdev_priv(wl->monitor_dev);
+	if (!priv)
+		return NULL;
+
+	priv->real_ndev = real_dev;
+
+	return wl->monitor_dev;
+}
+
+void wilc_wfi_deinit_mon_interface(struct wilc *wl, bool rtnl_locked)
+{
+	if (!wl->monitor_dev)
+		return;
+
+	if (rtnl_locked)
+		unregister_netdevice(wl->monitor_dev);
+	else
+		unregister_netdev(wl->monitor_dev);
+	wl->monitor_dev = NULL;
+}
-- 
2.24.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  6:33 [PATCH v6 00/17] wilc1000: move out of staging Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 01/17] wilc1000: add hif.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 02/17] wilc1000: add hif.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 03/17] wilc1000: add wlan_if.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 04/17] wilc1000: add wlan_cfg.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 05/17] wilc1000: add wlan_cfg.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 06/17] wilc1000: add cfg80211.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 07/17] wilc1000: add cfg80211.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 08/17] wilc1000: add netdev.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 09/17] wilc1000: add netdev.c Ajay.Kathat
2020-03-27  6:33 ` Ajay.Kathat [this message]
2020-03-27  6:33 ` [PATCH v6 11/17] wilc1000: add spi.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 12/17] wilc1000: add wlan.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 14/17] wilc1000: add sdio.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 13/17] wilc1000: add wlan.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 15/17] wilc1000: add fw.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 16/17] dt: bindings: net: add microchip,wilc1000.yaml Ajay.Kathat
2020-04-05  1:32   ` Rob Herring
2020-03-27  6:33 ` [PATCH v6 17/17] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat
2020-03-27 11:16 ` [PATCH v6 00/17] wilc1000: move out of staging Kalle Valo
2020-03-27 11:25   ` Greg KH
2020-03-27 12:07   ` Ajay.Kathat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327063302.20511-11-ajay.kathat@microchip.com \
    --to=ajay.kathat@microchip.com \
    --cc=Adham.Abozaeid@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=Venkateswara.Kaja@microchip.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git