DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
	Ajay.Kathat@microchip.com, Venkateswara.Kaja@microchip.com,
	gregkh@linuxfoundation.org, Nicolas.Ferre@microchip.com,
	Adham.Abozaeid@microchip.com, johannes@sipsolutions.net
Subject: [PATCH v6 11/17] wilc1000: add spi.c
Date: Fri, 27 Mar 2020 06:33:16 +0000
Message-ID: <20200327063302.20511-12-ajay.kathat@microchip.com> (raw)
In-Reply-To: <20200327063302.20511-1-ajay.kathat@microchip.com>

From: Ajay Singh <ajay.kathat@microchip.com>

Moved 'drivers/staging/wilc1000/spi.c' to
'drivers/net/wireless/microchip/wilc1000/spi.c'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 drivers/net/wireless/microchip/wilc1000/spi.c | 945 ++++++++++++++++++
 1 file changed, 945 insertions(+)
 create mode 100644 drivers/net/wireless/microchip/wilc1000/spi.c

diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
new file mode 100644
index 000000000000..3f19e3f38a39
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -0,0 +1,945 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/crc7.h>
+
+#include "netdev.h"
+#include "cfg80211.h"
+
+struct wilc_spi {
+	int crc_off;
+};
+
+static const struct wilc_hif_func wilc_hif_spi;
+
+/********************************************
+ *
+ *      Spi protocol Function
+ *
+ ********************************************/
+
+#define CMD_DMA_WRITE				0xc1
+#define CMD_DMA_READ				0xc2
+#define CMD_INTERNAL_WRITE			0xc3
+#define CMD_INTERNAL_READ			0xc4
+#define CMD_TERMINATE				0xc5
+#define CMD_REPEAT				0xc6
+#define CMD_DMA_EXT_WRITE			0xc7
+#define CMD_DMA_EXT_READ			0xc8
+#define CMD_SINGLE_WRITE			0xc9
+#define CMD_SINGLE_READ				0xca
+#define CMD_RESET				0xcf
+
+#define DATA_PKT_SZ_256				256
+#define DATA_PKT_SZ_512				512
+#define DATA_PKT_SZ_1K				1024
+#define DATA_PKT_SZ_4K				(4 * 1024)
+#define DATA_PKT_SZ_8K				(8 * 1024)
+#define DATA_PKT_SZ				DATA_PKT_SZ_8K
+
+#define USE_SPI_DMA				0
+
+#define WILC_SPI_COMMAND_STAT_SUCCESS		0
+#define WILC_GET_RESP_HDR_START(h)		(((h) >> 4) & 0xf)
+
+struct wilc_spi_cmd {
+	u8 cmd_type;
+	union {
+		struct {
+			u8 addr[3];
+			u8 crc[];
+		} __packed simple_cmd;
+		struct {
+			u8 addr[3];
+			u8 size[2];
+			u8 crc[];
+		} __packed dma_cmd;
+		struct {
+			u8 addr[3];
+			u8 size[3];
+			u8 crc[];
+		} __packed dma_cmd_ext;
+		struct {
+			u8 addr[2];
+			__be32 data;
+			u8 crc[];
+		} __packed internal_w_cmd;
+		struct {
+			u8 addr[3];
+			__be32 data;
+			u8 crc[];
+		} __packed w_cmd;
+	} u;
+} __packed;
+
+struct wilc_spi_read_rsp_data {
+	u8 rsp_cmd_type;
+	u8 status;
+	u8 resp_header;
+	u8 resp_data[4];
+	u8 crc[];
+} __packed;
+
+struct wilc_spi_rsp_data {
+	u8 rsp_cmd_type;
+	u8 status;
+} __packed;
+
+static int wilc_bus_probe(struct spi_device *spi)
+{
+	int ret;
+	struct wilc *wilc;
+	struct wilc_spi *spi_priv;
+
+	spi_priv = kzalloc(sizeof(*spi_priv), GFP_KERNEL);
+	if (!spi_priv)
+		return -ENOMEM;
+
+	ret = wilc_cfg80211_init(&wilc, &spi->dev, WILC_HIF_SPI, &wilc_hif_spi);
+	if (ret) {
+		kfree(spi_priv);
+		return ret;
+	}
+
+	spi_set_drvdata(spi, wilc);
+	wilc->dev = &spi->dev;
+	wilc->bus_data = spi_priv;
+	wilc->dev_irq_num = spi->irq;
+
+	wilc->rtc_clk = devm_clk_get(&spi->dev, "rtc_clk");
+	if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (!IS_ERR(wilc->rtc_clk))
+		clk_prepare_enable(wilc->rtc_clk);
+
+	return 0;
+}
+
+static int wilc_bus_remove(struct spi_device *spi)
+{
+	struct wilc *wilc = spi_get_drvdata(spi);
+
+	if (!IS_ERR(wilc->rtc_clk))
+		clk_disable_unprepare(wilc->rtc_clk);
+
+	wilc_netdev_cleanup(wilc);
+	return 0;
+}
+
+static const struct of_device_id wilc_of_match[] = {
+	{ .compatible = "microchip,wilc1000", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, wilc_of_match);
+
+static struct spi_driver wilc_spi_driver = {
+	.driver = {
+		.name = MODALIAS,
+		.of_match_table = wilc_of_match,
+	},
+	.probe =  wilc_bus_probe,
+	.remove = wilc_bus_remove,
+};
+module_spi_driver(wilc_spi_driver);
+MODULE_LICENSE("GPL");
+
+static int wilc_spi_tx(struct wilc *wilc, u8 *b, u32 len)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int ret;
+	struct spi_message msg;
+
+	if (len > 0 && b) {
+		struct spi_transfer tr = {
+			.tx_buf = b,
+			.len = len,
+			.delay = {
+				.value = 0,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
+		};
+		char *r_buffer = kzalloc(len, GFP_KERNEL);
+
+		if (!r_buffer)
+			return -ENOMEM;
+
+		tr.rx_buf = r_buffer;
+		dev_dbg(&spi->dev, "Request writing %d bytes\n", len);
+
+		memset(&msg, 0, sizeof(msg));
+		spi_message_init(&msg);
+		msg.spi = spi;
+		msg.is_dma_mapped = USE_SPI_DMA;
+		spi_message_add_tail(&tr, &msg);
+
+		ret = spi_sync(spi, &msg);
+		if (ret < 0)
+			dev_err(&spi->dev, "SPI transaction failed\n");
+
+		kfree(r_buffer);
+	} else {
+		dev_err(&spi->dev,
+			"can't write data with the following length: %d\n",
+			len);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int wilc_spi_rx(struct wilc *wilc, u8 *rb, u32 rlen)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int ret;
+
+	if (rlen > 0) {
+		struct spi_message msg;
+		struct spi_transfer tr = {
+			.rx_buf = rb,
+			.len = rlen,
+			.delay = {
+				.value = 0,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
+
+		};
+		char *t_buffer = kzalloc(rlen, GFP_KERNEL);
+
+		if (!t_buffer)
+			return -ENOMEM;
+
+		tr.tx_buf = t_buffer;
+
+		memset(&msg, 0, sizeof(msg));
+		spi_message_init(&msg);
+		msg.spi = spi;
+		msg.is_dma_mapped = USE_SPI_DMA;
+		spi_message_add_tail(&tr, &msg);
+
+		ret = spi_sync(spi, &msg);
+		if (ret < 0)
+			dev_err(&spi->dev, "SPI transaction failed\n");
+		kfree(t_buffer);
+	} else {
+		dev_err(&spi->dev,
+			"can't read data with the following length: %u\n",
+			rlen);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int ret;
+
+	if (rlen > 0) {
+		struct spi_message msg;
+		struct spi_transfer tr = {
+			.rx_buf = rb,
+			.tx_buf = wb,
+			.len = rlen,
+			.bits_per_word = 8,
+			.delay = {
+				.value = 0,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
+
+		};
+
+		memset(&msg, 0, sizeof(msg));
+		spi_message_init(&msg);
+		msg.spi = spi;
+		msg.is_dma_mapped = USE_SPI_DMA;
+
+		spi_message_add_tail(&tr, &msg);
+		ret = spi_sync(spi, &msg);
+		if (ret < 0)
+			dev_err(&spi->dev, "SPI transaction failed\n");
+	} else {
+		dev_err(&spi->dev,
+			"can't read data with the following length: %u\n",
+			rlen);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	int ix, nbytes;
+	int result = 0;
+	u8 cmd, order, crc[2] = {0};
+
+	/*
+	 * Data
+	 */
+	ix = 0;
+	do {
+		if (sz <= DATA_PKT_SZ) {
+			nbytes = sz;
+			order = 0x3;
+		} else {
+			nbytes = DATA_PKT_SZ;
+			if (ix == 0)
+				order = 0x1;
+			else
+				order = 0x02;
+		}
+
+		/*
+		 * Write command
+		 */
+		cmd = 0xf0;
+		cmd |= order;
+
+		if (wilc_spi_tx(wilc, &cmd, 1)) {
+			dev_err(&spi->dev,
+				"Failed data block cmd write, bus error...\n");
+			result = -EINVAL;
+			break;
+		}
+
+		/*
+		 * Write data
+		 */
+		if (wilc_spi_tx(wilc, &b[ix], nbytes)) {
+			dev_err(&spi->dev,
+				"Failed data block write, bus error...\n");
+			result = -EINVAL;
+			break;
+		}
+
+		/*
+		 * Write Crc
+		 */
+		if (!spi_priv->crc_off) {
+			if (wilc_spi_tx(wilc, crc, 2)) {
+				dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
+				result = -EINVAL;
+				break;
+			}
+		}
+
+		/*
+		 * No need to wait for response
+		 */
+		ix += nbytes;
+		sz -= nbytes;
+	} while (sz);
+
+	return result;
+}
+
+/********************************************
+ *
+ *      Spi Internal Read/Write Function
+ *
+ ********************************************/
+static u8 wilc_get_crc7(u8 *buffer, u32 len)
+{
+	return crc7_be(0xfe, buffer, len);
+}
+
+static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
+				u8 clockless)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	u8 crc[2];
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_read_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_SINGLE_READ) {
+		c->u.simple_cmd.addr[0] = adr >> 16;
+		c->u.simple_cmd.addr[1] = adr >> 8;
+		c->u.simple_cmd.addr[2] = adr;
+	} else if (cmd == CMD_INTERNAL_READ) {
+		c->u.simple_cmd.addr[0] = adr >> 8;
+		if (clockless == 1)
+			c->u.simple_cmd.addr[0] |= BIT(7);
+		c->u.simple_cmd.addr[1] = adr;
+		c->u.simple_cmd.addr[2] = 0x0;
+	} else {
+		dev_err(&spi->dev, "cmd [%x] not supported\n", cmd);
+		return -EINVAL;
+	}
+
+	cmd_len = offsetof(struct wilc_spi_cmd, u.simple_cmd.crc);
+	resp_len = sizeof(*r);
+	if (!spi_priv->crc_off) {
+		c->u.simple_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+		cmd_len += 1;
+		resp_len += 2;
+	}
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev,
+			"spi buffer size too small (%d) (%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_read_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	if (WILC_GET_RESP_HDR_START(r->resp_header) != 0xf) {
+		dev_err(&spi->dev, "Error, data read response (%02x)\n",
+			r->resp_header);
+		return -EINVAL;
+	}
+
+	if (b)
+		memcpy(b, r->resp_data, 4);
+
+	if (!spi_priv->crc_off)
+		memcpy(crc, r->crc, 2);
+
+	return 0;
+}
+
+static int wilc_spi_write_cmd(struct wilc *wilc, u8 cmd, u32 adr, u32 data,
+			      u8 clockless)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_INTERNAL_WRITE) {
+		c->u.internal_w_cmd.addr[0] = adr >> 8;
+		if (clockless == 1)
+			c->u.internal_w_cmd.addr[0] |= BIT(7);
+
+		c->u.internal_w_cmd.addr[1] = adr;
+		c->u.internal_w_cmd.data = cpu_to_be32(data);
+		cmd_len = offsetof(struct wilc_spi_cmd, u.internal_w_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.internal_w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else if (cmd == CMD_SINGLE_WRITE) {
+		c->u.w_cmd.addr[0] = adr >> 16;
+		c->u.w_cmd.addr[1] = adr >> 8;
+		c->u.w_cmd.addr[2] = adr;
+		c->u.w_cmd.data = cpu_to_be32(data);
+		cmd_len = offsetof(struct wilc_spi_cmd, u.w_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else {
+		dev_err(&spi->dev, "write cmd [%x] not supported\n", cmd);
+		return -EINVAL;
+	}
+
+	if (!spi_priv->crc_off)
+		cmd_len += 1;
+
+	resp_len = sizeof(*r);
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev,
+			"spi buffer size too small (%d) (%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wilc_spi_dma_rw(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	int retry, ix = 0;
+	u8 crc[2];
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_READ) {
+		c->u.dma_cmd.addr[0] = adr >> 16;
+		c->u.dma_cmd.addr[1] = adr >> 8;
+		c->u.dma_cmd.addr[2] = adr;
+		c->u.dma_cmd.size[0] = sz >> 8;
+		c->u.dma_cmd.size[1] = sz;
+		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.dma_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else if (cmd == CMD_DMA_EXT_WRITE || cmd == CMD_DMA_EXT_READ) {
+		c->u.dma_cmd_ext.addr[0] = adr >> 16;
+		c->u.dma_cmd_ext.addr[1] = adr >> 8;
+		c->u.dma_cmd_ext.addr[2] = adr;
+		c->u.dma_cmd_ext.size[0] = sz >> 16;
+		c->u.dma_cmd_ext.size[1] = sz >> 8;
+		c->u.dma_cmd_ext.size[2] = sz;
+		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd_ext.crc);
+		if (!spi_priv->crc_off)
+			c->u.dma_cmd_ext.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else {
+		dev_err(&spi->dev, "dma read write cmd [%x] not supported\n",
+			cmd);
+		return -EINVAL;
+	}
+	if (!spi_priv->crc_off)
+		cmd_len += 1;
+
+	resp_len = sizeof(*r);
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev, "spi buffer size too small (%d)(%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_EXT_WRITE)
+		return 0;
+
+	while (sz > 0) {
+		int nbytes;
+		u8 rsp;
+
+		if (sz <= DATA_PKT_SZ)
+			nbytes = sz;
+		else
+			nbytes = DATA_PKT_SZ;
+
+		/*
+		 * Data Response header
+		 */
+		retry = 100;
+		do {
+			if (wilc_spi_rx(wilc, &rsp, 1)) {
+				dev_err(&spi->dev,
+					"Failed resp read, bus err\n");
+				return -EINVAL;
+			}
+			if (WILC_GET_RESP_HDR_START(rsp) == 0xf)
+				break;
+		} while (retry--);
+
+		/*
+		 * Read bytes
+		 */
+		if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
+			dev_err(&spi->dev,
+				"Failed block read, bus err\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * Read Crc
+		 */
+		if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
+			dev_err(&spi->dev,
+				"Failed block crc read, bus err\n");
+			return -EINVAL;
+		}
+
+		ix += nbytes;
+		sz -= nbytes;
+	}
+	return 0;
+}
+
+static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+	u8 cmd = CMD_SINGLE_READ;
+	u8 clockless = 0;
+
+	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
+		/* Clockless register */
+		cmd = CMD_INTERNAL_READ;
+		clockless = 1;
+	}
+
+	result = wilc_spi_single_read(wilc, cmd, addr, data, clockless);
+	if (result) {
+		dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
+		return result;
+	}
+
+	le32_to_cpus(data);
+
+	return 0;
+}
+
+static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+
+	if (size <= 4)
+		return -EINVAL;
+
+	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_READ, addr, buf, size);
+	if (result) {
+		dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
+		return result;
+	}
+
+	return 0;
+}
+
+static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+
+	result = wilc_spi_write_cmd(wilc, CMD_INTERNAL_WRITE, adr, dat, 0);
+	if (result) {
+		dev_err(&spi->dev, "Failed internal write cmd...\n");
+		return result;
+	}
+
+	return 0;
+}
+
+static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+
+	result = wilc_spi_single_read(wilc, CMD_INTERNAL_READ, adr, data, 0);
+	if (result) {
+		dev_err(&spi->dev, "Failed internal read cmd...\n");
+		return result;
+	}
+
+	le32_to_cpus(data);
+
+	return 0;
+}
+
+/********************************************
+ *
+ *      Spi interfaces
+ *
+ ********************************************/
+
+static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+	u8 cmd = CMD_SINGLE_WRITE;
+	u8 clockless = 0;
+
+	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
+		/* Clockless register */
+		cmd = CMD_INTERNAL_WRITE;
+		clockless = 1;
+	}
+
+	result = wilc_spi_write_cmd(wilc, cmd, addr, data, clockless);
+	if (result) {
+		dev_err(&spi->dev, "Failed cmd, write reg (%08x)...\n", addr);
+		return result;
+	}
+
+	return 0;
+}
+
+static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+
+	/*
+	 * has to be greated than 4
+	 */
+	if (size <= 4)
+		return -EINVAL;
+
+	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_WRITE, addr, NULL, size);
+	if (result) {
+		dev_err(&spi->dev,
+			"Failed cmd, write block (%08x)...\n", addr);
+		return result;
+	}
+
+	/*
+	 * Data
+	 */
+	result = spi_data_write(wilc, buf, size);
+	if (result) {
+		dev_err(&spi->dev, "Failed block data write...\n");
+		return result;
+	}
+
+	return 0;
+}
+
+/********************************************
+ *
+ *      Bus interfaces
+ *
+ ********************************************/
+
+static int wilc_spi_deinit(struct wilc *wilc)
+{
+	/*
+	 * TODO:
+	 */
+	return 0;
+}
+
+static int wilc_spi_init(struct wilc *wilc, bool resume)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u32 reg;
+	u32 chipid;
+	static int isinit;
+	int ret;
+
+	if (isinit) {
+		ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
+		if (ret)
+			dev_err(&spi->dev, "Fail cmd read chip id...\n");
+
+		return ret;
+	}
+
+	/*
+	 * configure protocol
+	 */
+
+	/*
+	 * TODO: We can remove the CRC trials if there is a definite
+	 * way to reset
+	 */
+	/* the SPI to it's initial value. */
+	ret = spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, &reg);
+	if (ret) {
+		/*
+		 * Read failed. Try with CRC off. This might happen when module
+		 * is removed but chip isn't reset
+		 */
+		spi_priv->crc_off = 1;
+		dev_err(&spi->dev,
+			"Failed read with CRC on, retrying with CRC off\n");
+		ret = spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, &reg);
+		if (ret) {
+			/*
+			 * Read failed with both CRC on and off,
+			 * something went bad
+			 */
+			dev_err(&spi->dev, "Failed internal read protocol\n");
+			return ret;
+		}
+	}
+	if (spi_priv->crc_off == 0) {
+		reg &= ~0xc; /* disable crc checking */
+		reg &= ~0x70;
+		reg |= (0x5 << 4);
+		ret = spi_internal_write(wilc, WILC_SPI_PROTOCOL_OFFSET, reg);
+		if (ret) {
+			dev_err(&spi->dev,
+				"[wilc spi %d]: Failed internal write reg\n",
+				__LINE__);
+			return ret;
+		}
+		spi_priv->crc_off = 1;
+	}
+
+	/*
+	 * make sure can read back chip id correctly
+	 */
+	ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
+	if (ret) {
+		dev_err(&spi->dev, "Fail cmd read chip id...\n");
+		return ret;
+	}
+
+	isinit = 1;
+
+	return 0;
+}
+
+static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
+{
+	int ret;
+
+	ret = spi_internal_read(wilc,
+				WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE, size);
+	*size = FIELD_GET(IRQ_DMA_WD_CNT_MASK, *size);
+
+	return ret;
+}
+
+static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
+{
+	return spi_internal_read(wilc, WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE,
+				 int_status);
+}
+
+static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
+{
+	return spi_internal_write(wilc, WILC_SPI_INT_CLEAR - WILC_SPI_REG_BASE,
+				  val);
+}
+
+static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	u32 reg;
+	int ret, i;
+
+	if (nint > MAX_NUM_INT) {
+		dev_err(&spi->dev, "Too many interrupts (%d)...\n", nint);
+		return -EINVAL;
+	}
+
+	/*
+	 * interrupt pin mux select
+	 */
+	ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, &reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+			WILC_PIN_MUX_0);
+		return ret;
+	}
+	reg |= BIT(8);
+	ret = wilc_spi_write_reg(wilc, WILC_PIN_MUX_0, reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+			WILC_PIN_MUX_0);
+		return ret;
+	}
+
+	/*
+	 * interrupt enable
+	 */
+	ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, &reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+			WILC_INTR_ENABLE);
+		return ret;
+	}
+
+	for (i = 0; (i < 5) && (nint > 0); i++, nint--)
+		reg |= (BIT((27 + i)));
+
+	ret = wilc_spi_write_reg(wilc, WILC_INTR_ENABLE, reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+			WILC_INTR_ENABLE);
+		return ret;
+	}
+	if (nint) {
+		ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
+		if (ret) {
+			dev_err(&spi->dev, "Failed read reg (%08x)...\n",
+				WILC_INTR2_ENABLE);
+			return ret;
+		}
+
+		for (i = 0; (i < 3) && (nint > 0); i++, nint--)
+			reg |= BIT(i);
+
+		ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
+		if (ret) {
+			dev_err(&spi->dev, "Failed write reg (%08x)...\n",
+				WILC_INTR2_ENABLE);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/* Global spi HIF function table */
+static const struct wilc_hif_func wilc_hif_spi = {
+	.hif_init = wilc_spi_init,
+	.hif_deinit = wilc_spi_deinit,
+	.hif_read_reg = wilc_spi_read_reg,
+	.hif_write_reg = wilc_spi_write_reg,
+	.hif_block_rx = wilc_spi_read,
+	.hif_block_tx = wilc_spi_write,
+	.hif_read_int = wilc_spi_read_int,
+	.hif_clear_int_ext = wilc_spi_clear_int_ext,
+	.hif_read_size = wilc_spi_read_size,
+	.hif_block_tx_ext = wilc_spi_write,
+	.hif_block_rx_ext = wilc_spi_read,
+	.hif_sync_ext = wilc_spi_sync_ext,
+};
-- 
2.24.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  6:33 [PATCH v6 00/17] wilc1000: move out of staging Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 01/17] wilc1000: add hif.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 02/17] wilc1000: add hif.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 03/17] wilc1000: add wlan_if.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 04/17] wilc1000: add wlan_cfg.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 05/17] wilc1000: add wlan_cfg.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 06/17] wilc1000: add cfg80211.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 07/17] wilc1000: add cfg80211.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 08/17] wilc1000: add netdev.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 09/17] wilc1000: add netdev.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 10/17] wilc1000: add mon.c Ajay.Kathat
2020-03-27  6:33 ` Ajay.Kathat [this message]
2020-03-27  6:33 ` [PATCH v6 12/17] wilc1000: add wlan.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 14/17] wilc1000: add sdio.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 13/17] wilc1000: add wlan.c Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 15/17] wilc1000: add fw.h Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 16/17] dt: bindings: net: add microchip,wilc1000.yaml Ajay.Kathat
2020-03-27  6:33 ` [PATCH v6 17/17] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat
2020-03-27 11:16 ` [PATCH v6 00/17] wilc1000: move out of staging Kalle Valo
2020-03-27 11:25   ` Greg KH
2020-03-27 12:07   ` Ajay.Kathat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327063302.20511-12-ajay.kathat@microchip.com \
    --to=ajay.kathat@microchip.com \
    --cc=Adham.Abozaeid@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=Venkateswara.Kaja@microchip.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git