From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
"Rob Herring" <robh+dt@kernel.org>,
"Pali Rohár" <pali@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
"Kalle Valo" <kvalo@codeaurora.org>
Subject: [PATCH v3 04/24] wfx: add wfx.h
Date: Wed, 4 Nov 2020 16:51:47 +0100 [thread overview]
Message-ID: <20201104155207.128076-5-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20201104155207.128076-1-Jerome.Pouiller@silabs.com>
From: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
drivers/net/wireless/silabs/wfx/wfx.h | 166 ++++++++++++++++++++++++++
1 file changed, 166 insertions(+)
create mode 100644 drivers/net/wireless/silabs/wfx/wfx.h
diff --git a/drivers/net/wireless/silabs/wfx/wfx.h b/drivers/net/wireless/silabs/wfx/wfx.h
new file mode 100644
index 000000000000..94898680ccde
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/wfx.h
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common private data for Silicon Labs WFx chips.
+ *
+ * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ */
+#ifndef WFX_H
+#define WFX_H
+
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/nospec.h>
+#include <net/mac80211.h>
+
+#include "bh.h"
+#include "data_tx.h"
+#include "main.h"
+#include "queue.h"
+#include "hif_tx.h"
+
+#define USEC_PER_TXOP 32 // see struct ieee80211_tx_queue_params
+#define USEC_PER_TU 1024
+
+struct hwbus_ops;
+
+struct wfx_dev {
+ struct wfx_platform_data pdata;
+ struct device *dev;
+ struct ieee80211_hw *hw;
+ struct ieee80211_vif *vif[2];
+ struct mac_address addresses[2];
+ const struct hwbus_ops *hwbus_ops;
+ void *hwbus_priv;
+
+ u8 keyset;
+ struct completion firmware_ready;
+ struct hif_ind_startup hw_caps;
+ struct wfx_hif hif;
+ struct delayed_work cooling_timeout_work;
+ bool poll_irq;
+ bool chip_frozen;
+ struct mutex conf_mutex;
+
+ struct wfx_hif_cmd hif_cmd;
+ struct sk_buff_head tx_pending;
+ wait_queue_head_t tx_dequeue;
+ atomic_t tx_lock;
+
+ atomic_t packet_id;
+ u32 key_map;
+
+ struct hif_rx_stats rx_stats;
+ struct mutex rx_stats_lock;
+ struct hif_tx_power_loop_info tx_power_loop_info;
+ struct mutex tx_power_loop_info_lock;
+ int force_ps_timeout;
+};
+
+struct wfx_vif {
+ struct wfx_dev *wdev;
+ struct ieee80211_vif *vif;
+ struct ieee80211_channel *channel;
+ int id;
+
+ u32 link_id_map;
+
+ bool after_dtim_tx_allowed;
+ bool join_in_progress;
+
+ struct delayed_work beacon_loss_work;
+
+ struct wfx_queue tx_queue[4];
+ struct tx_policy_cache tx_policy_cache;
+ struct work_struct tx_policy_upload_work;
+
+ struct work_struct update_tim_work;
+
+ unsigned long uapsd_mask;
+
+ /* avoid some operations in parallel with scan */
+ struct mutex scan_lock;
+ struct work_struct scan_work;
+ struct completion scan_complete;
+ bool scan_abort;
+ struct ieee80211_scan_request *scan_req;
+
+ struct completion set_pm_mode_complete;
+};
+
+static inline struct wfx_vif *wdev_to_wvif(struct wfx_dev *wdev, int vif_id)
+{
+ if (vif_id >= ARRAY_SIZE(wdev->vif)) {
+ dev_dbg(wdev->dev, "requesting non-existent vif: %d\n", vif_id);
+ return NULL;
+ }
+ vif_id = array_index_nospec(vif_id, ARRAY_SIZE(wdev->vif));
+ if (!wdev->vif[vif_id]) {
+ dev_dbg(wdev->dev, "requesting non-allocated vif: %d\n",
+ vif_id);
+ return NULL;
+ }
+ return (struct wfx_vif *) wdev->vif[vif_id]->drv_priv;
+}
+
+static inline struct wfx_vif *wvif_iterate(struct wfx_dev *wdev,
+ struct wfx_vif *cur)
+{
+ int i;
+ int mark = 0;
+ struct wfx_vif *tmp;
+
+ if (!cur)
+ mark = 1;
+ for (i = 0; i < ARRAY_SIZE(wdev->vif); i++) {
+ tmp = wdev_to_wvif(wdev, i);
+ if (mark && tmp)
+ return tmp;
+ if (tmp == cur)
+ mark = 1;
+ }
+ return NULL;
+}
+
+static inline int wvif_count(struct wfx_dev *wdev)
+{
+ int i;
+ int ret = 0;
+ struct wfx_vif *wvif;
+
+ for (i = 0; i < ARRAY_SIZE(wdev->vif); i++) {
+ wvif = wdev_to_wvif(wdev, i);
+ if (wvif)
+ ret++;
+ }
+ return ret;
+}
+
+static inline void memreverse(u8 *src, u8 length)
+{
+ u8 *lo = src;
+ u8 *hi = src + length - 1;
+ u8 swap;
+
+ while (lo < hi) {
+ swap = *lo;
+ *lo++ = *hi;
+ *hi-- = swap;
+ }
+}
+
+static inline int memzcmp(void *src, unsigned int size)
+{
+ u8 *buf = src;
+
+ if (!size)
+ return 0;
+ if (*buf)
+ return 1;
+ return memcmp(buf, buf + 1, size - 1);
+}
+
+#endif /* WFX_H */
--
2.28.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2020-11-04 15:52 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-04 15:51 [PATCH v3 00/24] wfx: get out from the staging area Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip Jerome Pouiller
2020-12-22 15:04 ` Kalle Valo
2020-11-04 15:51 ` [PATCH v3 02/24] dt-bindings: introduce silabs,wfx.yaml Jerome Pouiller
2020-11-04 19:15 ` Rob Herring
2020-11-05 8:36 ` Jérôme Pouiller
2020-11-04 15:51 ` [PATCH v3 03/24] wfx: add Makefile/Kconfig Jerome Pouiller
2020-12-22 15:02 ` Kalle Valo
2020-12-22 21:19 ` Jérôme Pouiller
2020-12-23 5:16 ` Kalle Valo
2020-12-22 15:05 ` Kalle Valo
2020-11-04 15:51 ` Jerome Pouiller [this message]
2020-11-04 15:51 ` [PATCH v3 05/24] wfx: add main.c/main.h Jerome Pouiller
2020-12-22 15:07 ` Kalle Valo
2020-12-22 15:44 ` Kalle Valo
2020-12-23 12:09 ` Jérôme Pouiller
2020-11-04 15:51 ` [PATCH v3 06/24] wfx: add bus.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 07/24] wfx: add bus_spi.c Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 08/24] wfx: add bus_sdio.c Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 09/24] wfx: add hwio.c/hwio.h Jerome Pouiller
2020-12-22 15:10 ` Kalle Valo
2020-12-22 15:27 ` Greg Kroah-Hartman
2020-12-22 21:02 ` Jérôme Pouiller
2020-12-23 5:28 ` Kalle Valo
2021-01-04 12:34 ` Dan Carpenter
2021-01-04 12:38 ` Dan Carpenter
2021-01-04 14:48 ` Johan Hovold
2020-12-23 8:01 ` Jérôme Pouiller
2020-12-23 8:09 ` Greg Kroah-Hartman
2020-11-04 15:51 ` [PATCH v3 10/24] wfx: add fwio.c/fwio.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 11/24] wfx: add bh.c/bh.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 12/24] wfx: add hif_api_*.h Jerome Pouiller
2020-12-22 15:20 ` Kalle Valo
2020-12-22 21:05 ` Jérôme Pouiller
2020-11-04 15:51 ` [PATCH v3 13/24] wfx: add hif_tx*.c/hif_tx*.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 14/24] wfx: add key.c/key.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 15/24] wfx: add hif_rx.c/hif_rx.h Jerome Pouiller
2020-11-04 15:51 ` [PATCH v3 16/24] wfx: add data_rx.c/data_rx.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 17/24] wfx: add queue.c/queue.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 18/24] wfx: add data_tx.c/data_tx.h Jerome Pouiller
2020-12-22 15:27 ` Kalle Valo
2020-12-22 15:31 ` Kalle Valo
2020-11-04 15:52 ` [PATCH v3 19/24] wfx: add sta.c/sta.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 20/24] wfx: add scan.c/scan.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 21/24] wfx: add debug.c/debug.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 22/24] wfx: add traces.h Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 23/24] wfx: remove from the staging area Jerome Pouiller
2020-11-04 15:52 ` [PATCH v3 24/24] wfx: get out " Jerome Pouiller
2020-12-22 15:23 ` [PATCH v3 00/24] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201104155207.128076-5-Jerome.Pouiller@silabs.com \
--to=jerome.pouiller@silabs.com \
--cc=davem@davemloft.net \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pali@kernel.org \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).