DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] staging: spmi: hisi-spmi-controller: Fix some error handling paths
@ 2020-12-13 15:11 Christophe JAILLET
  0 siblings, 0 replies; only message in thread
From: Christophe JAILLET @ 2020-12-13 15:11 UTC (permalink / raw)
  To: mchehab+huawei, gregkh
  Cc: devel, Christophe JAILLET, kernel-janitors, linux-kernel

IN the probe function, if an error occurs after calling
'spmi_controller_alloc()', it must be undone by a corresponding
'spmi_controller_put() call.

In the remove function, use 'spmi_controller_put(ctrl)' instead of
'kfree(ctrl)'.

While a it fix an error message
(s/spmi_add_controller/spmi_controller_add/)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 .../staging/hikey9xx/hisi-spmi-controller.c   | 21 +++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index 861aedd5de48..0d42bc65f39b 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -278,21 +278,24 @@ static int spmi_controller_probe(struct platform_device *pdev)
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iores) {
 		dev_err(&pdev->dev, "can not get resource!\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_put_controller;
 	}
 
 	spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
 					     resource_size(iores));
 	if (!spmi_controller->base) {
 		dev_err(&pdev->dev, "can not remap base addr!\n");
-		return -EADDRNOTAVAIL;
+		ret = -EADDRNOTAVAIL;
+		goto err_put_controller;
 	}
 
 	ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
 				   &spmi_controller->channel);
 	if (ret) {
 		dev_err(&pdev->dev, "can not get channel\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_put_controller;
 	}
 
 	platform_set_drvdata(pdev, spmi_controller);
@@ -309,9 +312,15 @@ static int spmi_controller_probe(struct platform_device *pdev)
 	ctrl->write_cmd = spmi_write_cmd;
 
 	ret = spmi_controller_add(ctrl);
-	if (ret)
-		dev_err(&pdev->dev, "spmi_add_controller failed with error %d!\n", ret);
+	if (ret) {
+		dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
+		goto err_put_controller;
+	}
+
+	return 0;
 
+err_put_controller:
+	spmi_controller_put(ctrl);
 	return ret;
 }
 
@@ -320,7 +329,7 @@ static int spmi_del_controller(struct platform_device *pdev)
 	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
 
 	spmi_controller_remove(ctrl);
-	kfree(ctrl);
+	spmi_controller_put(ctrl);
 	return 0;
 }
 
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-13 15:11 [PATCH] staging: spmi: hisi-spmi-controller: Fix some error handling paths Christophe JAILLET

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git