From: William Durand <will+git@drnd.me>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: rtl8192e: fix alignment issues in rtllib_wx.c
Date: Fri, 19 Feb 2021 23:33:52 +0000 [thread overview]
Message-ID: <20210219233352.2298-1-will+git@drnd.me> (raw)
Fixes "Alignment should match open parenthesis" issues reported by
checkpatch.pl in the `rtllib_wx.c` file.
Signed-off-by: William Durand <will+git@drnd.me>
---
drivers/staging/rtl8192e/rtllib_wx.c | 42 ++++++++++++----------------
1 file changed, 18 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index ecd472baee16..ce095febc9ed 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -160,8 +160,7 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
- start = iwe_stream_add_event_rsl(info, start, stop, &iwe,
- IW_EV_PARAM_LEN);
+ start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_PARAM_LEN);
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
@@ -181,15 +180,13 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,
if (!(network->stats.mask & RTLLIB_STATMASK_SIGNAL))
iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
iwe.u.qual.updated = 7;
- start = iwe_stream_add_event_rsl(info, start, stop, &iwe,
- IW_EV_QUAL_LEN);
+ start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_QUAL_LEN);
iwe.cmd = IWEVCUSTOM;
p = custom;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
- start = iwe_stream_add_point_rsl(info, start, stop,
- &iwe, custom);
+ start = iwe_stream_add_point_rsl(info, start, stop, &iwe, custom);
memset(&iwe, 0, sizeof(iwe));
if (network->wpa_ie_len) {
@@ -238,8 +235,8 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,
}
int rtllib_wx_get_scan(struct rtllib_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
struct rtllib_network *network;
unsigned long flags;
@@ -285,8 +282,8 @@ int rtllib_wx_get_scan(struct rtllib_device *ieee,
EXPORT_SYMBOL(rtllib_wx_get_scan);
int rtllib_wx_set_encode(struct rtllib_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *keybuf)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
struct net_device *dev = ieee->dev;
@@ -328,7 +325,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
if (key_provided)
break;
lib80211_crypt_delayed_deinit(&ieee->crypt_info,
- &ieee->crypt_info.crypt[i]);
+ &ieee->crypt_info.crypt[i]);
}
}
@@ -406,8 +403,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
NULL, (*crypt)->priv);
if (len == 0) {
/* Set a default key of all 0 */
- netdev_info(ieee->dev, "Setting key %d to all zero.\n",
- key);
+ netdev_info(ieee->dev, "Setting key %d to all zero.\n", key);
memset(sec.keys[key], 0, 13);
(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
@@ -460,8 +456,8 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
EXPORT_SYMBOL(rtllib_wx_set_encode);
int rtllib_wx_get_encode(struct rtllib_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *keybuf)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
int len, key;
@@ -505,8 +501,8 @@ int rtllib_wx_get_encode(struct rtllib_device *ieee,
EXPORT_SYMBOL(rtllib_wx_get_encode);
int rtllib_wx_set_encode_ext(struct rtllib_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
int ret = 0;
struct net_device *dev = ieee->dev;
@@ -663,8 +659,8 @@ int rtllib_wx_set_encode_ext(struct rtllib_device *ieee,
EXPORT_SYMBOL(rtllib_wx_set_encode_ext);
int rtllib_wx_set_mlme(struct rtllib_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
u8 i = 0;
bool deauth = false;
@@ -710,8 +706,8 @@ int rtllib_wx_set_mlme(struct rtllib_device *ieee,
EXPORT_SYMBOL(rtllib_wx_set_mlme);
int rtllib_wx_set_auth(struct rtllib_device *ieee,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra)
{
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
@@ -771,9 +767,7 @@ int rtllib_wx_set_gen_ie(struct rtllib_device *ieee, u8 *ie, size_t len)
if (len) {
eid = ie[0];
- if ((eid == MFIE_TYPE_GENERIC) && (!memcmp(&ie[2],
- wps_oui, 4))) {
-
+ if ((eid == MFIE_TYPE_GENERIC) && (!memcmp(&ie[2], wps_oui, 4))) {
ieee->wps_ie_len = min_t(size_t, len, MAX_WZC_IE_LEN);
buf = kmemdup(ie, ieee->wps_ie_len, GFP_KERNEL);
if (!buf)
--
2.30.0
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
reply other threads:[~2021-02-21 20:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210219233352.2298-1-will+git@drnd.me \
--to=will+git@drnd.me \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).