* [PATCH v4 0/3] Add MIPI rx DPI support
@ 2021-01-28 3:07 Xin Ji
2021-01-28 3:09 ` [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value Xin Ji
2021-01-28 3:10 ` [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support Xin Ji
0 siblings, 2 replies; 10+ messages in thread
From: Xin Ji @ 2021-01-28 3:07 UTC (permalink / raw)
To: Rob Herring, Nicolas Boichat, Andrzej Hajda, Neil Armstrong
Cc: devel, Jernej Skrabec, Sheng Pan, Jonas Karlman, David Airlie,
linux-kernel, dri-devel, Vasily Khoruzhick, Boris Brezillon,
Torsten Duwe, Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
Hi all, this patch series implement MIPI rx DPI feature. Please help to review.
This is the v4 version, any mistakes, please let me know,
I'll fix it in the next series.
Change history:
v4: Fix Rob Herring comment
- Rebase code on the branch 'drm-misc-next'
- Change 'analogix,hdcp-support' type to boolean
v3: Fix Rob Herring, Dan Carpenter, Nicolas comment
- Split the patch, fix not correct return data
- Fix several coding format
- Split DP tx swing register setting to two property
- Add HDCP support vender flag
- remove 'analogix,swing-setting' and 'analogix,mipi-dpi-in' property
v2: Fix Rob Herring comment
- Fix yamllint warnings/errors in analogix,anx7625.yaml
- Fix kernel robot compile warning
v1: initial MIPI rx DPI feature support
Xin Ji (3):
dt-bindings:drm/bridge:anx7625:add vendor define flags
drm/bridge: anx7625: fix not correct return value
drm/bridge: anx7625: add MIPI DPI input feature support
.../bindings/display/bridge/analogix,anx7625.yaml | 54 +++-
drivers/gpu/drm/bridge/analogix/anx7625.c | 330 +++++++++++++++++----
drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
3 files changed, 340 insertions(+), 64 deletions(-)
--
2.7.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value
2021-01-28 3:07 [PATCH v4 0/3] Add MIPI rx DPI support Xin Ji
@ 2021-01-28 3:09 ` Xin Ji
2021-02-04 12:28 ` Robert Foss
2021-01-28 3:10 ` [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support Xin Ji
1 sibling, 1 reply; 10+ messages in thread
From: Xin Ji @ 2021-01-28 3:09 UTC (permalink / raw)
To: Nicolas Boichat, Andrzej Hajda, Neil Armstrong
Cc: devel, Jernej Skrabec, Sheng Pan, Jonas Karlman, David Airlie,
linux-kernel, dri-devel, Vasily Khoruzhick, Boris Brezillon,
Torsten Duwe, Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
At some time, the original code may return non zero value, force return 0
if operation finished
Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 65cc059..04536cc 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -189,10 +189,10 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
AP_AUX_CTRL_STATUS);
if (val < 0 || (val & 0x0F)) {
DRM_DEV_ERROR(dev, "aux status %02x\n", val);
- val = -EIO;
+ return -EIO;
}
- return val;
+ return 0;
}
static int anx7625_video_mute_control(struct anx7625_data *ctx,
--
2.7.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-01-28 3:07 [PATCH v4 0/3] Add MIPI rx DPI support Xin Ji
2021-01-28 3:09 ` [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value Xin Ji
@ 2021-01-28 3:10 ` Xin Ji
2021-02-05 12:33 ` Robert Foss
2021-02-24 9:55 ` Hsin-Yi Wang
1 sibling, 2 replies; 10+ messages in thread
From: Xin Ji @ 2021-01-28 3:10 UTC (permalink / raw)
To: Nicolas Boichat, Andrzej Hajda, Neil Armstrong
Cc: devel, Jernej Skrabec, Sheng Pan, Jonas Karlman, David Airlie,
linux-kernel, dri-devel, Vasily Khoruzhick, Boris Brezillon,
Torsten Duwe, Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
Add MIPI rx DPI input support
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
2 files changed, 285 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 04536cc..628ae43 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
return anx7625_reg_write(ctx, client, offset, (val & (mask)));
}
-static int anx7625_write_and_or(struct anx7625_data *ctx,
- struct i2c_client *client,
- u8 offset, u8 and_mask, u8 or_mask)
+static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
{
- int val;
+ int i, ret;
- val = anx7625_reg_read(ctx, client, offset);
- if (val < 0)
- return val;
+ ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CONTROL_REGISTER, 0x80);
+ for (i = 0; i < 13; i++)
+ ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+ VIDEO_BIT_MATRIX_12 + i,
+ 0x18 + i);
- return anx7625_reg_write(ctx, client,
- offset, (val & and_mask) | (or_mask));
+ return ret;
}
static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
@@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
return 0;
}
+static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
+ u8 addrh, u8 addrm, u8 addrl,
+ u8 len, u8 *buf)
+{
+ struct device *dev = &ctx->client->dev;
+ int ret;
+ u8 cmd;
+
+ if (len > MAX_DPCD_BUFFER_SIZE) {
+ DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
+ return -EINVAL;
+ }
+
+ cmd = ((len - 1) << 4) | 0x09;
+
+ /* Set command and length */
+ ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_COMMAND, cmd);
+
+ /* Set aux access address */
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_ADDR_7_0, addrl);
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_ADDR_15_8, addrm);
+ ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_ADDR_19_16, addrh);
+
+ /* Enable aux access */
+ ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
+ return -EIO;
+ }
+
+ usleep_range(2000, 2100);
+
+ ret = wait_aux_op_finish(ctx);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
+ return ret;
+ }
+
+ ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+ AP_AUX_BUFF_START, len, buf);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "read dpcd register failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
static int anx7625_video_mute_control(struct anx7625_data *ctx,
u8 status)
{
@@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
return ret;
}
-static int anx7625_config_audio_input(struct anx7625_data *ctx)
-{
- struct device *dev = &ctx->client->dev;
- int ret;
-
- /* Channel num */
- ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
-
- /* FS */
- ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CHANNEL_STATUS_4,
- 0xf0, AUDIO_FS_48K);
- /* Word length */
- ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CHANNEL_STATUS_5,
- 0xf0, AUDIO_W_LEN_24_24MAX);
- /* I2S */
- ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
- ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
- AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
- /* Audio change flag */
- ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
- AP_AV_STATUS, AP_AUDIO_CHG);
-
- if (ret < 0)
- DRM_DEV_ERROR(dev, "fail to config audio.\n");
-
- return ret;
-}
-
/* Reduction of fraction a/b */
static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
{
@@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
MIPI_LANE_CTRL_0, 0xfc);
ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
- MIPI_LANE_CTRL_0, 3);
+ MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
/* Htotal */
htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
@@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
return ret;
}
+static int anx7625_api_dpi_config(struct anx7625_data *ctx)
+{
+ struct device *dev = &ctx->client->dev;
+ u16 freq = ctx->dt.pixelclock.min / 1000;
+ int ret;
+
+ /* configure pixel clock */
+ ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+ PIXEL_CLOCK_L, freq & 0xFF);
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+ PIXEL_CLOCK_H, (freq >> 8));
+
+ /* set DPI mode */
+ /* set to DPI PLL module sel */
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+ MIPI_DIGITAL_PLL_9, 0x20);
+ /* power down MIPI */
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+ MIPI_LANE_CTRL_10, 0x08);
+ /* enable DPI mode */
+ ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
+ MIPI_DIGITAL_PLL_18, 0x1C);
+ /* set first edge */
+ ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
+ VIDEO_CONTROL_0, 0x06);
+ if (ret < 0)
+ DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
+
+ return ret;
+}
+
+static int anx7625_dpi_config(struct anx7625_data *ctx)
+{
+ struct device *dev = &ctx->client->dev;
+ int ret;
+
+ DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
+
+ /* DSC disable */
+ ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+ R_DSC_CTRL_0, ~DSC_EN);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
+ return ret;
+ }
+
+ ret = anx7625_config_bit_matrix(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
+ return ret;
+ }
+
+ ret = anx7625_api_dpi_config(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
+ return ret;
+ }
+
+ /* set MIPI RX EN */
+ ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+ AP_AV_STATUS, AP_MIPI_RX_EN);
+ /* clear mute flag */
+ ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
+ AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
+ if (ret < 0)
+ DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
+
+ return ret;
+}
+
+static int anx7625_hdcp_setting(struct anx7625_data *ctx)
+{
+ u8 bcap;
+ struct device *dev = &ctx->client->dev;
+
+ if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
+ DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
+ ctx->pdata.hdcp_support, ctx->hdcp_en);
+ DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
+ return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+ 0xee, 0x9f);
+ }
+
+ anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
+ if (!(bcap & 0x01)) {
+ DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
+ return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+ 0xee, 0x9f);
+ }
+
+ DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
+
+ return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
+}
+
static void anx7625_dp_start(struct anx7625_data *ctx)
{
int ret;
@@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
return;
}
- anx7625_config_audio_input(ctx);
+ /* HDCP config */
+ anx7625_hdcp_setting(ctx);
- ret = anx7625_dsi_config(ctx);
+ if (ctx->pdata.is_dpi)
+ ret = anx7625_dpi_config(ctx);
+ else
+ ret = anx7625_dsi_config(ctx);
if (ret < 0)
DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
@@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
return c;
}
-static int edid_read(struct anx7625_data *ctx,
- u8 offset, u8 *pblock_buf)
+static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
{
int ret, cnt;
struct device *dev = &ctx->client->dev;
@@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
if (state) {
atomic_inc(&ctx->power_status);
- if (atomic_read(&ctx->power_status) == 1)
+ if (atomic_read(&ctx->power_status) == 1) {
anx7625_power_on_init(ctx);
+ }
} else {
if (atomic_read(&ctx->power_status)) {
atomic_dec(&ctx->power_status);
@@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
return;
}
+ ctx->hpd_status = 1;
ctx->hpd_high_cnt++;
/* Not support HDCP */
@@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
/* Interrupt for DRM */
ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
- if (ret < 0)
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
return;
+ }
ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
if (ret < 0)
@@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
int ret, val;
struct device *dev = &ctx->client->dev;
+ /* Interrupt mode, no need poll HPD status, just return */
+ if (ctx->pdata.intp_irq)
+ return;
+
if (atomic_read(&ctx->power_status) != 1) {
DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
return;
@@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
ctx->slimport_edid_p.edid_block_num = -1;
}
+static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
+{
+ int i;
+
+ for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
+ anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
+ DP_TX_LANE0_SWING_REG0 + i,
+ ctx->pdata.lane0_reg_data[i] & 0xFF);
+
+ for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
+ anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
+ DP_TX_LANE1_SWING_REG0 + i,
+ ctx->pdata.lane1_reg_data[i] & 0xFF);
+}
+
static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
{
struct device *dev = &ctx->client->dev;
@@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
} else {
DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
anx7625_start_dp_work(ctx);
+ anx7625_dp_adjust_swing(ctx);
}
-
- ctx->hpd_status = 1;
}
static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
@@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static int anx7625_get_swing_setting(struct device *dev,
+ struct anx7625_platform_data *pdata)
+{
+ int num_regs;
+
+ if (of_get_property(dev->of_node,
+ "analogix,lane0-swing", &num_regs)) {
+ if (num_regs > DP_TX_SWING_REG_CNT)
+ num_regs = DP_TX_SWING_REG_CNT;
+
+ pdata->dp_lane0_swing_reg_cnt = num_regs;
+ of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
+ pdata->lane0_reg_data, num_regs);
+ }
+
+ if (of_get_property(dev->of_node,
+ "analogix,lane1-swing", &num_regs)) {
+ if (num_regs > DP_TX_SWING_REG_CNT)
+ num_regs = DP_TX_SWING_REG_CNT;
+
+ pdata->dp_lane1_swing_reg_cnt = num_regs;
+ of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
+ pdata->lane1_reg_data, num_regs);
+ }
+
+ return 0;
+}
+
static int anx7625_parse_dt(struct device *dev,
struct anx7625_platform_data *pdata)
{
struct device_node *np = dev->of_node;
struct drm_panel *panel;
int ret;
+ int bus_type;
+
+ anx7625_get_swing_setting(dev, pdata);
+ pdata->is_dpi = 1; /* default dpi mode */
pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
if (!pdata->mipi_host_node) {
DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
return -ENODEV;
}
- DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
+ if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
+ bus_type = 0;
+
+ if (bus_type == 5) /* bus type is Parallel(DSI) */
+ pdata->is_dpi = 0;
+
+ pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
+ "data-lanes");
+ if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
+ pdata->mipi_lanes = MAX_LANES_SUPPORT;
+
+ if (pdata->is_dpi)
+ DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
+ else
+ DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
+
+ if (of_property_read_bool(np, "analogix,hdcp-support"))
+ pdata->hdcp_support = 1;
ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
if (ret < 0) {
@@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
{
struct device *dev = &ctx->client->dev;
- DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
+ DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
+
+ if (ctx->pdata.panel_bridge)
+ return connector_status_connected;
- return connector_status_connected;
+ return ctx->hpd_status ? connector_status_connected :
+ connector_status_disconnected;
}
static int anx7625_attach_dsi(struct anx7625_data *ctx)
@@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
return -EINVAL;
}
- dsi->lanes = 4;
+ dsi->lanes = ctx->pdata.mipi_lanes;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
@@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
return -ENODEV;
}
- err = anx7625_attach_dsi(ctx);
- if (err) {
- DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
- return err;
+ if (!ctx->pdata.is_dpi) {
+ err = anx7625_attach_dsi(ctx);
+ if (err) {
+ DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
+ return err;
+ }
}
if (ctx->pdata.panel_bridge) {
@@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
+ /* No need fixup for external monitor */
+ if (!ctx->pdata.panel_bridge)
+ return true;
+
hsync = mode->hsync_end - mode->hsync_start;
hfp = mode->hsync_start - mode->hdisplay;
hbp = mode->htotal - mode->hsync_end;
@@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
platform->bridge.funcs = &anx7625_bridge_funcs;
platform->bridge.of_node = client->dev.of_node;
- platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
- platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
+ platform->bridge.ops = DRM_BRIDGE_OP_EDID;
+ if (!platform->pdata.panel_bridge)
+ platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
+ DRM_BRIDGE_OP_DETECT;
+ platform->bridge.type = platform->pdata.panel_bridge ?
+ DRM_MODE_CONNECTOR_eDP :
+ DRM_MODE_CONNECTOR_DisplayPort;
drm_bridge_add(&platform->bridge);
DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 193ad86..127081e 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -141,12 +141,20 @@
#define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
/******** END of I2C Address 0x72 *********/
+
+/***************************************************************/
+/* Register definition of device address 0x7a */
+#define DP_TX_SWING_REG_CNT 0x14
+#define DP_TX_LANE0_SWING_REG0 0x00
+#define DP_TX_LANE1_SWING_REG0 0x14
+/******** END of I2C Address 0x7a *********/
+
/***************************************************************/
/* Register definition of device address 0x7e */
#define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
-#define FLASH_LOAD_STA 0x05
+#define FLASH_LOAD_STA 0x05
#define FLASH_LOAD_STA_CHK BIT(7)
#define XTAL_FRQ_SEL 0x3F
@@ -347,11 +355,20 @@ struct s_edid_data {
/***************** Display End *****************/
+#define MAX_LANES_SUPPORT 4
+
struct anx7625_platform_data {
struct gpio_desc *gpio_p_on;
struct gpio_desc *gpio_reset;
struct drm_bridge *panel_bridge;
int intp_irq;
+ int is_dpi;
+ int mipi_lanes;
+ int hdcp_support;
+ int dp_lane0_swing_reg_cnt;
+ int lane0_reg_data[DP_TX_SWING_REG_CNT];
+ int dp_lane1_swing_reg_cnt;
+ int lane1_reg_data[DP_TX_SWING_REG_CNT];
u32 low_power_mode;
struct device_node *mipi_host_node;
};
@@ -371,6 +388,7 @@ struct anx7625_data {
atomic_t power_status;
int hpd_status;
int hpd_high_cnt;
+ int hdcp_en;
/* Lock for work queue */
struct mutex lock;
struct i2c_client *client;
--
2.7.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value
2021-01-28 3:09 ` [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value Xin Ji
@ 2021-02-04 12:28 ` Robert Foss
2021-02-05 11:40 ` Xin Ji
0 siblings, 1 reply; 10+ messages in thread
From: Robert Foss @ 2021-02-04 12:28 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Neil Armstrong, linux-kernel, dri-devel,
Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon, Torsten Duwe,
Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang, Sam Ravnborg,
Dan Carpenter, Marek Szyprowski
Hi Xin,
On Thu, 28 Jan 2021 at 04:12, Xin Ji <xji@analogixsemi.com> wrote:
>
> At some time, the original code may return non zero value, force return 0
> if operation finished
Missing "." at end of line.
Other than that, this patch looks fine. Feel free to add my r-b.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 65cc059..04536cc 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -189,10 +189,10 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> AP_AUX_CTRL_STATUS);
> if (val < 0 || (val & 0x0F)) {
> DRM_DEV_ERROR(dev, "aux status %02x\n", val);
> - val = -EIO;
> + return -EIO;
> }
>
> - return val;
> + return 0;
> }
>
> static int anx7625_video_mute_control(struct anx7625_data *ctx,
> --
> 2.7.4
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value
2021-02-04 12:28 ` Robert Foss
@ 2021-02-05 11:40 ` Xin Ji
0 siblings, 0 replies; 10+ messages in thread
From: Xin Ji @ 2021-02-05 11:40 UTC (permalink / raw)
To: Robert Foss
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Bernie Liang, Neil Armstrong, linux-kernel,
dri-devel, Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon,
Torsten Duwe, Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
On Thu, Feb 04, 2021 at 01:28:30PM +0100, Robert Foss wrote:
> Hi Xin,
>
> On Thu, 28 Jan 2021 at 04:12, Xin Ji <xji@analogixsemi.com> wrote:
> >
> > At some time, the original code may return non zero value, force return 0
> > if operation finished
>
> Missing "." at end of line.
Hi Rob, OK, thanks, I'll add it in the next series.
Thanks,
Xin
>
> Other than that, this patch looks fine. Feel free to add my r-b.
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
>
> >
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > ---
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 65cc059..04536cc 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -189,10 +189,10 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> > AP_AUX_CTRL_STATUS);
> > if (val < 0 || (val & 0x0F)) {
> > DRM_DEV_ERROR(dev, "aux status %02x\n", val);
> > - val = -EIO;
> > + return -EIO;
> > }
> >
> > - return val;
> > + return 0;
> > }
> >
> > static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > --
> > 2.7.4
> >
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-01-28 3:10 ` [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support Xin Ji
@ 2021-02-05 12:33 ` Robert Foss
2021-02-18 5:40 ` Xin Ji
2021-02-24 9:55 ` Hsin-Yi Wang
1 sibling, 1 reply; 10+ messages in thread
From: Robert Foss @ 2021-02-05 12:33 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Neil Armstrong, linux-kernel, dri-devel,
Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon, Torsten Duwe,
Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang, Sam Ravnborg,
Dan Carpenter, Marek Szyprowski
Hey Xin,
On Thu, 28 Jan 2021 at 04:12, Xin Ji <xji@analogixsemi.com> wrote:
>
> Add MIPI rx DPI input support
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
> drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
> 2 files changed, 285 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 04536cc..628ae43 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> }
>
> -static int anx7625_write_and_or(struct anx7625_data *ctx,
> - struct i2c_client *client,
> - u8 offset, u8 and_mask, u8 or_mask)
> +static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> {
> - int val;
> + int i, ret;
>
> - val = anx7625_reg_read(ctx, client, offset);
> - if (val < 0)
> - return val;
> + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CONTROL_REGISTER, 0x80);
> + for (i = 0; i < 13; i++)
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> + VIDEO_BIT_MATRIX_12 + i,
> + 0x18 + i);
>
> - return anx7625_reg_write(ctx, client,
> - offset, (val & and_mask) | (or_mask));
> + return ret;
> }
>
> static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
> @@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> return 0;
> }
>
> +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> + u8 addrh, u8 addrm, u8 addrl,
> + u8 len, u8 *buf)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> + u8 cmd;
> +
> + if (len > MAX_DPCD_BUFFER_SIZE) {
> + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> + return -EINVAL;
> + }
> +
> + cmd = ((len - 1) << 4) | 0x09;
> +
> + /* Set command and length */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_COMMAND, cmd);
> +
> + /* Set aux access address */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_7_0, addrl);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_15_8, addrm);
> + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_19_16, addrh);
> +
> + /* Enable aux access */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> +
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> + return -EIO;
> + }
> +
> + usleep_range(2000, 2100);
> +
> + ret = wait_aux_op_finish(ctx);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_BUFF_START, len, buf);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_video_mute_control(struct anx7625_data *ctx,
> u8 status)
> {
> @@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
> return ret;
> }
>
> -static int anx7625_config_audio_input(struct anx7625_data *ctx)
> -{
> - struct device *dev = &ctx->client->dev;
> - int ret;
> -
> - /* Channel num */
> - ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
> -
> - /* FS */
> - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_4,
> - 0xf0, AUDIO_FS_48K);
> - /* Word length */
> - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_5,
> - 0xf0, AUDIO_W_LEN_24_24MAX);
> - /* I2S */
> - ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
> - ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
> - /* Audio change flag */
> - ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> - AP_AV_STATUS, AP_AUDIO_CHG);
> -
> - if (ret < 0)
> - DRM_DEV_ERROR(dev, "fail to config audio.\n");
> -
> - return ret;
> -}
> -
> /* Reduction of fraction a/b */
> static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
> {
> @@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> MIPI_LANE_CTRL_0, 0xfc);
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
> - MIPI_LANE_CTRL_0, 3);
> + MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
Is this mipi_lanes change independent of the rest of this patch?
If so, extract it to a seperate patch.
>
> /* Htotal */
> htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
> @@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
> return ret;
> }
>
> +static int anx7625_api_dpi_config(struct anx7625_data *ctx)
> +{
> + struct device *dev = &ctx->client->dev;
> + u16 freq = ctx->dt.pixelclock.min / 1000;
> + int ret;
> +
> + /* configure pixel clock */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + PIXEL_CLOCK_L, freq & 0xFF);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + PIXEL_CLOCK_H, (freq >> 8));
> +
> + /* set DPI mode */
> + /* set to DPI PLL module sel */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_PLL_9, 0x20);
> + /* power down MIPI */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_LANE_CTRL_10, 0x08);
> + /* enable DPI mode */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_PLL_18, 0x1C);
> + /* set first edge */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> + VIDEO_CONTROL_0, 0x06);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
> +
> + return ret;
> +}
> +
> +static int anx7625_dpi_config(struct anx7625_data *ctx)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
> +
> + /* DSC disable */
> + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + R_DSC_CTRL_0, ~DSC_EN);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
> + return ret;
> + }
> +
> + ret = anx7625_config_bit_matrix(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
> + return ret;
> + }
> +
> + ret = anx7625_api_dpi_config(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
> + return ret;
> + }
> +
> + /* set MIPI RX EN */
> + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AV_STATUS, AP_MIPI_RX_EN);
> + /* clear mute flag */
> + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
> +
> + return ret;
> +}
> +
> +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> +{
> + u8 bcap;
> + struct device *dev = &ctx->client->dev;
> +
> + if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
> + DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
> + ctx->pdata.hdcp_support, ctx->hdcp_en);
> + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> + if (!(bcap & 0x01)) {
> + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> +
> + return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> +}
Is the HDCP support change independent of the rest of this patch?
If so, extract it to a seperate patch.
> +
> static void anx7625_dp_start(struct anx7625_data *ctx)
> {
> int ret;
> @@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> return;
> }
>
> - anx7625_config_audio_input(ctx);
> + /* HDCP config */
> + anx7625_hdcp_setting(ctx);
>
> - ret = anx7625_dsi_config(ctx);
> + if (ctx->pdata.is_dpi)
> + ret = anx7625_dpi_config(ctx);
> + else
> + ret = anx7625_dsi_config(ctx);
>
> if (ret < 0)
> DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> @@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
> return c;
> }
>
> -static int edid_read(struct anx7625_data *ctx,
> - u8 offset, u8 *pblock_buf)
> +static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
No functional change here, let's try to maintain the 'git blame'
history instead.
> {
> int ret, cnt;
> struct device *dev = &ctx->client->dev;
> @@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
>
> if (state) {
> atomic_inc(&ctx->power_status);
> - if (atomic_read(&ctx->power_status) == 1)
> + if (atomic_read(&ctx->power_status) == 1) {
> anx7625_power_on_init(ctx);
> + }
This too is not a functional change, and the previous format preferred
by the style guide.
> } else {
> if (atomic_read(&ctx->power_status)) {
> atomic_dec(&ctx->power_status);
> @@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> return;
> }
>
> + ctx->hpd_status = 1;
> ctx->hpd_high_cnt++;
>
> /* Not support HDCP */
> @@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> /* Interrupt for DRM */
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> - if (ret < 0)
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
> return;
> + }
>
> ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
> if (ret < 0)
> @@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
> int ret, val;
> struct device *dev = &ctx->client->dev;
>
> + /* Interrupt mode, no need poll HPD status, just return */
> + if (ctx->pdata.intp_irq)
> + return;
> +
> if (atomic_read(&ctx->power_status) != 1) {
> DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
> return;
> @@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
> ctx->slimport_edid_p.edid_block_num = -1;
> }
>
> +static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
> +{
> + int i;
> +
> + for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
> + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> + DP_TX_LANE0_SWING_REG0 + i,
> + ctx->pdata.lane0_reg_data[i] & 0xFF);
> +
> + for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
> + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> + DP_TX_LANE1_SWING_REG0 + i,
> + ctx->pdata.lane1_reg_data[i] & 0xFF);
> +}
> +
> static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> {
> struct device *dev = &ctx->client->dev;
> @@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> } else {
> DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
> anx7625_start_dp_work(ctx);
> + anx7625_dp_adjust_swing(ctx);
> }
> -
> - ctx->hpd_status = 1;
> }
>
> static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
> @@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> +static int anx7625_get_swing_setting(struct device *dev,
> + struct anx7625_platform_data *pdata)
> +{
> + int num_regs;
> +
> + if (of_get_property(dev->of_node,
> + "analogix,lane0-swing", &num_regs)) {
> + if (num_regs > DP_TX_SWING_REG_CNT)
> + num_regs = DP_TX_SWING_REG_CNT;
> +
> + pdata->dp_lane0_swing_reg_cnt = num_regs;
> + of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
> + pdata->lane0_reg_data, num_regs);
> + }
> +
> + if (of_get_property(dev->of_node,
> + "analogix,lane1-swing", &num_regs)) {
> + if (num_regs > DP_TX_SWING_REG_CNT)
> + num_regs = DP_TX_SWING_REG_CNT;
> +
> + pdata->dp_lane1_swing_reg_cnt = num_regs;
> + of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
> + pdata->lane1_reg_data, num_regs);
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_parse_dt(struct device *dev,
> struct anx7625_platform_data *pdata)
> {
> struct device_node *np = dev->of_node;
> struct drm_panel *panel;
> int ret;
> + int bus_type;
> +
> + anx7625_get_swing_setting(dev, pdata);
>
> + pdata->is_dpi = 1; /* default dpi mode */
> pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> if (!pdata->mipi_host_node) {
> DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> return -ENODEV;
> }
>
> - DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
> + if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
> + bus_type = 0;
> +
> + if (bus_type == 5) /* bus type is Parallel(DSI) */
> + pdata->is_dpi = 0;
> +
> + pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
> + "data-lanes");
> + if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> + pdata->mipi_lanes = MAX_LANES_SUPPORT;
> +
Is this mipi_lanes change independent of the rest of this patch?
If so, extract it to a seperate patch.
> + if (pdata->is_dpi)
> + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
> + else
> + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
> +
> + if (of_property_read_bool(np, "analogix,hdcp-support"))
> + pdata->hdcp_support = 1;
Extract hdcp_support change to separate patch.
>
> ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> if (ret < 0) {
> @@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> {
> struct device *dev = &ctx->client->dev;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
> + DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
> +
> + if (ctx->pdata.panel_bridge)
> + return connector_status_connected;
>
> - return connector_status_connected;
> + return ctx->hpd_status ? connector_status_connected :
> + connector_status_disconnected;
> }
>
> static int anx7625_attach_dsi(struct anx7625_data *ctx)
> @@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> return -EINVAL;
> }
>
> - dsi->lanes = 4;
> + dsi->lanes = ctx->pdata.mipi_lanes;
Extract mipi_lanes change to separate patch.
> dsi->format = MIPI_DSI_FMT_RGB888;
> dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> @@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
> return -ENODEV;
> }
>
> - err = anx7625_attach_dsi(ctx);
> - if (err) {
> - DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> - return err;
> + if (!ctx->pdata.is_dpi) {
> + err = anx7625_attach_dsi(ctx);
> + if (err) {
> + DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> + return err;
> + }
> }
>
> if (ctx->pdata.panel_bridge) {
> @@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
>
> DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
>
> + /* No need fixup for external monitor */
> + if (!ctx->pdata.panel_bridge)
> + return true;
> +
> hsync = mode->hsync_end - mode->hsync_start;
> hfp = mode->hsync_start - mode->hdisplay;
> hbp = mode->htotal - mode->hsync_end;
> @@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
>
> platform->bridge.funcs = &anx7625_bridge_funcs;
> platform->bridge.of_node = client->dev.of_node;
> - platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
> - platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
> + platform->bridge.ops = DRM_BRIDGE_OP_EDID;
> + if (!platform->pdata.panel_bridge)
> + platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
> + DRM_BRIDGE_OP_DETECT;
> + platform->bridge.type = platform->pdata.panel_bridge ?
> + DRM_MODE_CONNECTOR_eDP :
> + DRM_MODE_CONNECTOR_DisplayPort;
> drm_bridge_add(&platform->bridge);
>
> DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 193ad86..127081e 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -141,12 +141,20 @@
> #define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
>
> /******** END of I2C Address 0x72 *********/
> +
> +/***************************************************************/
> +/* Register definition of device address 0x7a */
> +#define DP_TX_SWING_REG_CNT 0x14
> +#define DP_TX_LANE0_SWING_REG0 0x00
> +#define DP_TX_LANE1_SWING_REG0 0x14
> +/******** END of I2C Address 0x7a *********/
> +
> /***************************************************************/
> /* Register definition of device address 0x7e */
>
> #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
>
> -#define FLASH_LOAD_STA 0x05
> +#define FLASH_LOAD_STA 0x05
> #define FLASH_LOAD_STA_CHK BIT(7)
>
> #define XTAL_FRQ_SEL 0x3F
> @@ -347,11 +355,20 @@ struct s_edid_data {
>
> /***************** Display End *****************/
>
> +#define MAX_LANES_SUPPORT 4
> +
> struct anx7625_platform_data {
> struct gpio_desc *gpio_p_on;
> struct gpio_desc *gpio_reset;
> struct drm_bridge *panel_bridge;
> int intp_irq;
> + int is_dpi;
> + int mipi_lanes;
Extract mipi_lanes change to separate patch.
> + int hdcp_support;
Extract hdcp_support change to separate patch.
> + int dp_lane0_swing_reg_cnt;
> + int lane0_reg_data[DP_TX_SWING_REG_CNT];
> + int dp_lane1_swing_reg_cnt;
> + int lane1_reg_data[DP_TX_SWING_REG_CNT];
> u32 low_power_mode;
> struct device_node *mipi_host_node;
> };
> @@ -371,6 +388,7 @@ struct anx7625_data {
> atomic_t power_status;
> int hpd_status;
> int hpd_high_cnt;
> + int hdcp_en;
Extract hdcp_support change to separate patch.
> /* Lock for work queue */
> struct mutex lock;
> struct i2c_client *client;
> --
> 2.7.4
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-02-05 12:33 ` Robert Foss
@ 2021-02-18 5:40 ` Xin Ji
0 siblings, 0 replies; 10+ messages in thread
From: Xin Ji @ 2021-02-18 5:40 UTC (permalink / raw)
To: Robert Foss
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Bernie Liang, Neil Armstrong, linux-kernel,
dri-devel, Vasily Khoruzhick, Andrzej Hajda, Boris Brezillon,
Torsten Duwe, Laurent Pinchart, Daniel Vetter, Hsin-Yi Wang,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
On Fri, Feb 05, 2021 at 01:33:46PM +0100, Robert Foss wrote:
> Hey Xin,
Hi Robert Foss, thanks for the comment, I'll split this patch at this seria.
Thanks,
Xin
>
> On Thu, 28 Jan 2021 at 04:12, Xin Ji <xji@analogixsemi.com> wrote:
> >
> > Add MIPI rx DPI input support
> >
> > Reported-by: kernel test robot <lkp@intel.com>
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > ---
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
> > 2 files changed, 285 insertions(+), 61 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 04536cc..628ae43 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> > return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> > }
> >
> > -static int anx7625_write_and_or(struct anx7625_data *ctx,
> > - struct i2c_client *client,
> > - u8 offset, u8 and_mask, u8 or_mask)
> > +static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> > {
> > - int val;
> > + int i, ret;
> >
> > - val = anx7625_reg_read(ctx, client, offset);
> > - if (val < 0)
> > - return val;
> > + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > + AUDIO_CONTROL_REGISTER, 0x80);
> > + for (i = 0; i < 13; i++)
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_BIT_MATRIX_12 + i,
> > + 0x18 + i);
> >
> > - return anx7625_reg_write(ctx, client,
> > - offset, (val & and_mask) | (or_mask));
> > + return ret;
> > }
> >
> > static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
> > @@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> > return 0;
> > }
> >
> > +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> > + u8 addrh, u8 addrm, u8 addrl,
> > + u8 len, u8 *buf)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > + u8 cmd;
> > +
> > + if (len > MAX_DPCD_BUFFER_SIZE) {
> > + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> > + return -EINVAL;
> > + }
> > +
> > + cmd = ((len - 1) << 4) | 0x09;
> > +
> > + /* Set command and length */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_COMMAND, cmd);
> > +
> > + /* Set aux access address */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_7_0, addrl);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_15_8, addrm);
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_19_16, addrh);
> > +
> > + /* Enable aux access */
> > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> > +
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> > + return -EIO;
> > + }
> > +
> > + usleep_range(2000, 2100);
> > +
> > + ret = wait_aux_op_finish(ctx);
> > + if (ret) {
> > + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_BUFF_START, len, buf);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> > + return -EIO;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > u8 status)
> > {
> > @@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > return ret;
> > }
> >
> > -static int anx7625_config_audio_input(struct anx7625_data *ctx)
> > -{
> > - struct device *dev = &ctx->client->dev;
> > - int ret;
> > -
> > - /* Channel num */
> > - ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
> > -
> > - /* FS */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_4,
> > - 0xf0, AUDIO_FS_48K);
> > - /* Word length */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_5,
> > - 0xf0, AUDIO_W_LEN_24_24MAX);
> > - /* I2S */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
> > - ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
> > - /* Audio change flag */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > - AP_AV_STATUS, AP_AUDIO_CHG);
> > -
> > - if (ret < 0)
> > - DRM_DEV_ERROR(dev, "fail to config audio.\n");
> > -
> > - return ret;
> > -}
> > -
> > /* Reduction of fraction a/b */
> > static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
> > {
> > @@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> > ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > MIPI_LANE_CTRL_0, 0xfc);
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
> > - MIPI_LANE_CTRL_0, 3);
> > + MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
>
> Is this mipi_lanes change independent of the rest of this patch?
> If so, extract it to a seperate patch.
OK, I'll extract it to a seperate patch.
>
> >
> > /* Htotal */
> > htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
> > @@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
> > return ret;
> > }
> >
> > +static int anx7625_api_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + u16 freq = ctx->dt.pixelclock.min / 1000;
> > + int ret;
> > +
> > + /* configure pixel clock */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_L, freq & 0xFF);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_H, (freq >> 8));
> > +
> > + /* set DPI mode */
> > + /* set to DPI PLL module sel */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_9, 0x20);
> > + /* power down MIPI */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_LANE_CTRL_10, 0x08);
> > + /* enable DPI mode */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_18, 0x1C);
> > + /* set first edge */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_CONTROL_0, 0x06);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
> > +
> > + /* DSC disable */
> > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + R_DSC_CTRL_0, ~DSC_EN);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_config_bit_matrix(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_api_dpi_config(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
> > + return ret;
> > + }
> > +
> > + /* set MIPI RX EN */
> > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, AP_MIPI_RX_EN);
> > + /* clear mute flag */
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> > +{
> > + u8 bcap;
> > + struct device *dev = &ctx->client->dev;
> > +
> > + if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
> > + DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
> > + ctx->pdata.hdcp_support, ctx->hdcp_en);
> > + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> > + if (!(bcap & 0x01)) {
> > + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> > +
> > + return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> > +}
>
> Is the HDCP support change independent of the rest of this patch?
> If so, extract it to a seperate patch.
OK, extract it to a seperate patch.
>
> > +
> > static void anx7625_dp_start(struct anx7625_data *ctx)
> > {
> > int ret;
> > @@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> > return;
> > }
> >
> > - anx7625_config_audio_input(ctx);
> > + /* HDCP config */
> > + anx7625_hdcp_setting(ctx);
> >
> > - ret = anx7625_dsi_config(ctx);
> > + if (ctx->pdata.is_dpi)
> > + ret = anx7625_dpi_config(ctx);
> > + else
> > + ret = anx7625_dsi_config(ctx);
> >
> > if (ret < 0)
> > DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> > @@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
> > return c;
> > }
> >
> > -static int edid_read(struct anx7625_data *ctx,
> > - u8 offset, u8 *pblock_buf)
> > +static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
>
> No functional change here, let's try to maintain the 'git blame'
> history instead.
I'll keep the original code
>
>
> > {
> > int ret, cnt;
> > struct device *dev = &ctx->client->dev;
> > @@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
> >
> > if (state) {
> > atomic_inc(&ctx->power_status);
> > - if (atomic_read(&ctx->power_status) == 1)
> > + if (atomic_read(&ctx->power_status) == 1) {
> > anx7625_power_on_init(ctx);
> > + }
>
> This too is not a functional change, and the previous format preferred
> by the style guide.
OK
>
> > } else {
> > if (atomic_read(&ctx->power_status)) {
> > atomic_dec(&ctx->power_status);
> > @@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > return;
> > }
> >
> > + ctx->hpd_status = 1;
> > ctx->hpd_high_cnt++;
> >
> > /* Not support HDCP */
> > @@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> > /* Interrupt for DRM */
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> > - if (ret < 0)
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
> > return;
> > + }
> >
> > ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
> > if (ret < 0)
> > @@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
> > int ret, val;
> > struct device *dev = &ctx->client->dev;
> >
> > + /* Interrupt mode, no need poll HPD status, just return */
> > + if (ctx->pdata.intp_irq)
> > + return;
> > +
> > if (atomic_read(&ctx->power_status) != 1) {
> > DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
> > return;
> > @@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
> > ctx->slimport_edid_p.edid_block_num = -1;
> > }
> >
> > +static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE0_SWING_REG0 + i,
> > + ctx->pdata.lane0_reg_data[i] & 0xFF);
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE1_SWING_REG0 + i,
> > + ctx->pdata.lane1_reg_data[i] & 0xFF);
> > +}
> > +
> > static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > {
> > struct device *dev = &ctx->client->dev;
> > @@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > } else {
> > DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
> > anx7625_start_dp_work(ctx);
> > + anx7625_dp_adjust_swing(ctx);
> > }
> > -
> > - ctx->hpd_status = 1;
> > }
> >
> > static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
> > @@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
> > return IRQ_HANDLED;
> > }
> >
> > +static int anx7625_get_swing_setting(struct device *dev,
> > + struct anx7625_platform_data *pdata)
> > +{
> > + int num_regs;
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane0-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane0_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
> > + pdata->lane0_reg_data, num_regs);
> > + }
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane1-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane1_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
> > + pdata->lane1_reg_data, num_regs);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_parse_dt(struct device *dev,
> > struct anx7625_platform_data *pdata)
> > {
> > struct device_node *np = dev->of_node;
> > struct drm_panel *panel;
> > int ret;
> > + int bus_type;
> > +
> > + anx7625_get_swing_setting(dev, pdata);
> >
> > + pdata->is_dpi = 1; /* default dpi mode */
> > pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> > if (!pdata->mipi_host_node) {
> > DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> > return -ENODEV;
> > }
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
> > + if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
> > + bus_type = 0;
> > +
> > + if (bus_type == 5) /* bus type is Parallel(DSI) */
> > + pdata->is_dpi = 0;
> > +
> > + pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
> > + "data-lanes");
> > + if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> > + pdata->mipi_lanes = MAX_LANES_SUPPORT;
> > +
>
> Is this mipi_lanes change independent of the rest of this patch?
> If so, extract it to a seperate patch.
OK
>
> > + if (pdata->is_dpi)
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
> > + else
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
> > +
> > + if (of_property_read_bool(np, "analogix,hdcp-support"))
> > + pdata->hdcp_support = 1;
>
> Extract hdcp_support change to separate patch.
OK
>
> >
> > ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> > if (ret < 0) {
> > @@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> > {
> > struct device *dev = &ctx->client->dev;
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
> > + DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
> > +
> > + if (ctx->pdata.panel_bridge)
> > + return connector_status_connected;
> >
> > - return connector_status_connected;
> > + return ctx->hpd_status ? connector_status_connected :
> > + connector_status_disconnected;
> > }
> >
> > static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > @@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > return -EINVAL;
> > }
> >
> > - dsi->lanes = 4;
> > + dsi->lanes = ctx->pdata.mipi_lanes;
>
> Extract mipi_lanes change to separate patch.
OK
>
> > dsi->format = MIPI_DSI_FMT_RGB888;
> > dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> > @@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
> > return -ENODEV;
> > }
> >
> > - err = anx7625_attach_dsi(ctx);
> > - if (err) {
> > - DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > - return err;
> > + if (!ctx->pdata.is_dpi) {
> > + err = anx7625_attach_dsi(ctx);
> > + if (err) {
> > + DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > + return err;
> > + }
> > }
> >
> > if (ctx->pdata.panel_bridge) {
> > @@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
> >
> > + /* No need fixup for external monitor */
> > + if (!ctx->pdata.panel_bridge)
> > + return true;
> > +
> > hsync = mode->hsync_end - mode->hsync_start;
> > hfp = mode->hsync_start - mode->hdisplay;
> > hbp = mode->htotal - mode->hsync_end;
> > @@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> >
> > platform->bridge.funcs = &anx7625_bridge_funcs;
> > platform->bridge.of_node = client->dev.of_node;
> > - platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
> > - platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
> > + platform->bridge.ops = DRM_BRIDGE_OP_EDID;
> > + if (!platform->pdata.panel_bridge)
> > + platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
> > + DRM_BRIDGE_OP_DETECT;
> > + platform->bridge.type = platform->pdata.panel_bridge ?
> > + DRM_MODE_CONNECTOR_eDP :
> > + DRM_MODE_CONNECTOR_DisplayPort;
> > drm_bridge_add(&platform->bridge);
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 193ad86..127081e 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -141,12 +141,20 @@
> > #define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
> >
> > /******** END of I2C Address 0x72 *********/
> > +
> > +/***************************************************************/
> > +/* Register definition of device address 0x7a */
> > +#define DP_TX_SWING_REG_CNT 0x14
> > +#define DP_TX_LANE0_SWING_REG0 0x00
> > +#define DP_TX_LANE1_SWING_REG0 0x14
> > +/******** END of I2C Address 0x7a *********/
> > +
> > /***************************************************************/
> > /* Register definition of device address 0x7e */
> >
> > #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
> >
> > -#define FLASH_LOAD_STA 0x05
> > +#define FLASH_LOAD_STA 0x05
> > #define FLASH_LOAD_STA_CHK BIT(7)
> >
> > #define XTAL_FRQ_SEL 0x3F
> > @@ -347,11 +355,20 @@ struct s_edid_data {
> >
> > /***************** Display End *****************/
> >
> > +#define MAX_LANES_SUPPORT 4
> > +
> > struct anx7625_platform_data {
> > struct gpio_desc *gpio_p_on;
> > struct gpio_desc *gpio_reset;
> > struct drm_bridge *panel_bridge;
> > int intp_irq;
> > + int is_dpi;
> > + int mipi_lanes;
>
> Extract mipi_lanes change to separate patch.
OK
>
> > + int hdcp_support;
>
> Extract hdcp_support change to separate patch.
OK
>
> > + int dp_lane0_swing_reg_cnt;
> > + int lane0_reg_data[DP_TX_SWING_REG_CNT];
> > + int dp_lane1_swing_reg_cnt;
> > + int lane1_reg_data[DP_TX_SWING_REG_CNT];
> > u32 low_power_mode;
> > struct device_node *mipi_host_node;
> > };
> > @@ -371,6 +388,7 @@ struct anx7625_data {
> > atomic_t power_status;
> > int hpd_status;
> > int hpd_high_cnt;
> > + int hdcp_en;
>
> Extract hdcp_support change to separate patch.
OK
>
> > /* Lock for work queue */
> > struct mutex lock;
> > struct i2c_client *client;
> > --
> > 2.7.4
> >
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-01-28 3:10 ` [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support Xin Ji
2021-02-05 12:33 ` Robert Foss
@ 2021-02-24 9:55 ` Hsin-Yi Wang
2021-02-24 10:42 ` Hsin-Yi Wang
2021-02-25 3:08 ` Xin Ji
1 sibling, 2 replies; 10+ messages in thread
From: Hsin-Yi Wang @ 2021-02-24 9:55 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Neil Armstrong, lkml, dri-devel, Vasily Khoruzhick,
Andrzej Hajda, Boris Brezillon, Torsten Duwe, Laurent Pinchart,
Daniel Vetter, Sam Ravnborg, Dan Carpenter, Marek Szyprowski
On Thu, Jan 28, 2021 at 11:10 AM Xin Ji <xji@analogixsemi.com> wrote:
>
> Add MIPI rx DPI input support
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
> drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
> 2 files changed, 285 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 04536cc..628ae43 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> }
>
> -static int anx7625_write_and_or(struct anx7625_data *ctx,
> - struct i2c_client *client,
> - u8 offset, u8 and_mask, u8 or_mask)
> +static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> {
> - int val;
> + int i, ret;
>
> - val = anx7625_reg_read(ctx, client, offset);
> - if (val < 0)
> - return val;
> + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> + AUDIO_CONTROL_REGISTER, 0x80);
> + for (i = 0; i < 13; i++)
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> + VIDEO_BIT_MATRIX_12 + i,
> + 0x18 + i);
>
> - return anx7625_reg_write(ctx, client,
> - offset, (val & and_mask) | (or_mask));
> + return ret;
> }
>
> static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
> @@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> return 0;
> }
>
> +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> + u8 addrh, u8 addrm, u8 addrl,
> + u8 len, u8 *buf)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> + u8 cmd;
> +
> + if (len > MAX_DPCD_BUFFER_SIZE) {
> + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> + return -EINVAL;
> + }
> +
> + cmd = ((len - 1) << 4) | 0x09;
> +
> + /* Set command and length */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_COMMAND, cmd);
> +
> + /* Set aux access address */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_7_0, addrl);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_15_8, addrm);
> + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_19_16, addrh);
> +
> + /* Enable aux access */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> +
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> + return -EIO;
> + }
> +
> + usleep_range(2000, 2100);
> +
> + ret = wait_aux_op_finish(ctx);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_BUFF_START, len, buf);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_video_mute_control(struct anx7625_data *ctx,
> u8 status)
> {
> @@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
> return ret;
> }
>
> -static int anx7625_config_audio_input(struct anx7625_data *ctx)
> -{
> - struct device *dev = &ctx->client->dev;
> - int ret;
> -
> - /* Channel num */
> - ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
> -
> - /* FS */
> - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_4,
> - 0xf0, AUDIO_FS_48K);
> - /* Word length */
> - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_5,
> - 0xf0, AUDIO_W_LEN_24_24MAX);
> - /* I2S */
> - ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
> - ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> - AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
> - /* Audio change flag */
> - ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> - AP_AV_STATUS, AP_AUDIO_CHG);
> -
> - if (ret < 0)
> - DRM_DEV_ERROR(dev, "fail to config audio.\n");
> -
> - return ret;
> -}
> -
> /* Reduction of fraction a/b */
> static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
> {
> @@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> MIPI_LANE_CTRL_0, 0xfc);
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
> - MIPI_LANE_CTRL_0, 3);
> + MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
>
> /* Htotal */
> htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
> @@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
> return ret;
> }
>
> +static int anx7625_api_dpi_config(struct anx7625_data *ctx)
> +{
> + struct device *dev = &ctx->client->dev;
> + u16 freq = ctx->dt.pixelclock.min / 1000;
> + int ret;
> +
> + /* configure pixel clock */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + PIXEL_CLOCK_L, freq & 0xFF);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + PIXEL_CLOCK_H, (freq >> 8));
> +
> + /* set DPI mode */
> + /* set to DPI PLL module sel */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_PLL_9, 0x20);
> + /* power down MIPI */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_LANE_CTRL_10, 0x08);
> + /* enable DPI mode */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> + MIPI_DIGITAL_PLL_18, 0x1C);
> + /* set first edge */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> + VIDEO_CONTROL_0, 0x06);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
> +
> + return ret;
> +}
> +
> +static int anx7625_dpi_config(struct anx7625_data *ctx)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
> +
> + /* DSC disable */
> + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + R_DSC_CTRL_0, ~DSC_EN);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
> + return ret;
> + }
> +
> + ret = anx7625_config_bit_matrix(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
> + return ret;
> + }
> +
> + ret = anx7625_api_dpi_config(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
> + return ret;
> + }
> +
> + /* set MIPI RX EN */
> + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AV_STATUS, AP_MIPI_RX_EN);
> + /* clear mute flag */
> + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> + AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
> +
> + return ret;
> +}
> +
> +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> +{
> + u8 bcap;
> + struct device *dev = &ctx->client->dev;
> +
> + if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
> + DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
> + ctx->pdata.hdcp_support, ctx->hdcp_en);
> + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> + if (!(bcap & 0x01)) {
> + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> +
> + return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> +}
> +
> static void anx7625_dp_start(struct anx7625_data *ctx)
> {
> int ret;
> @@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> return;
> }
>
> - anx7625_config_audio_input(ctx);
> + /* HDCP config */
> + anx7625_hdcp_setting(ctx);
>
> - ret = anx7625_dsi_config(ctx);
> + if (ctx->pdata.is_dpi)
> + ret = anx7625_dpi_config(ctx);
> + else
> + ret = anx7625_dsi_config(ctx);
>
> if (ret < 0)
> DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> @@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
> return c;
> }
>
> -static int edid_read(struct anx7625_data *ctx,
> - u8 offset, u8 *pblock_buf)
> +static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
> {
> int ret, cnt;
> struct device *dev = &ctx->client->dev;
> @@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
>
> if (state) {
> atomic_inc(&ctx->power_status);
> - if (atomic_read(&ctx->power_status) == 1)
> + if (atomic_read(&ctx->power_status) == 1) {
> anx7625_power_on_init(ctx);
> + }
> } else {
> if (atomic_read(&ctx->power_status)) {
> atomic_dec(&ctx->power_status);
> @@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> return;
> }
>
> + ctx->hpd_status = 1;
> ctx->hpd_high_cnt++;
>
> /* Not support HDCP */
> @@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> /* Interrupt for DRM */
> ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> - if (ret < 0)
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
> return;
> + }
>
> ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
> if (ret < 0)
> @@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
> int ret, val;
> struct device *dev = &ctx->client->dev;
>
> + /* Interrupt mode, no need poll HPD status, just return */
> + if (ctx->pdata.intp_irq)
> + return;
> +
> if (atomic_read(&ctx->power_status) != 1) {
> DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
> return;
> @@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
> ctx->slimport_edid_p.edid_block_num = -1;
> }
>
> +static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
> +{
> + int i;
> +
> + for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
> + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> + DP_TX_LANE0_SWING_REG0 + i,
> + ctx->pdata.lane0_reg_data[i] & 0xFF);
> +
> + for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
> + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> + DP_TX_LANE1_SWING_REG0 + i,
> + ctx->pdata.lane1_reg_data[i] & 0xFF);
> +}
> +
> static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> {
> struct device *dev = &ctx->client->dev;
> @@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> } else {
> DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
> anx7625_start_dp_work(ctx);
> + anx7625_dp_adjust_swing(ctx);
ctx->hpd_status = 1; is missing here
> }
> -
> - ctx->hpd_status = 1;
> }
>
> static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
> @@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> +static int anx7625_get_swing_setting(struct device *dev,
> + struct anx7625_platform_data *pdata)
> +{
> + int num_regs;
> +
> + if (of_get_property(dev->of_node,
> + "analogix,lane0-swing", &num_regs)) {
> + if (num_regs > DP_TX_SWING_REG_CNT)
> + num_regs = DP_TX_SWING_REG_CNT;
> +
> + pdata->dp_lane0_swing_reg_cnt = num_regs;
> + of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
> + pdata->lane0_reg_data, num_regs);
> + }
> +
> + if (of_get_property(dev->of_node,
> + "analogix,lane1-swing", &num_regs)) {
> + if (num_regs > DP_TX_SWING_REG_CNT)
> + num_regs = DP_TX_SWING_REG_CNT;
> +
> + pdata->dp_lane1_swing_reg_cnt = num_regs;
> + of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
> + pdata->lane1_reg_data, num_regs);
> + }
> +
> + return 0;
> +}
> +
> static int anx7625_parse_dt(struct device *dev,
> struct anx7625_platform_data *pdata)
> {
> struct device_node *np = dev->of_node;
> struct drm_panel *panel;
> int ret;
> + int bus_type;
> +
> + anx7625_get_swing_setting(dev, pdata);
>
> + pdata->is_dpi = 1; /* default dpi mode */
> pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> if (!pdata->mipi_host_node) {
> DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> return -ENODEV;
> }
>
> - DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
> + if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
According to previous patch, bus-type is added in endpoint node
instead of remote node (dsi), so this part should be:
struct device_node *np = dev->of_node, *ep0;
ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
of_property_read_u32(ep0, "bus-type", &bus_type);
I modified it based on this patch:
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
b/drivers/gpu/drm/bridge/analogix/anx7625.c
index f682b530dbfb6..343cc0bf785f6 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1541,10 +1542,10 @@ static void
anx7625_unregister_usb_two_ports(struct anx7625_data *ctx) {
static int anx7625_parse_dt(struct device *dev,
struct anx7625_platform_data *pdata)
{
- struct device_node *np = dev->of_node;
+ struct device_node *np = dev->of_node, *ep0;
struct drm_panel *panel;
int ret;
- int bus_type;
+ int bus_type = 0;
anx7625_get_swing_setting(dev, pdata);
@@ -1555,8 +1556,9 @@ static int anx7625_parse_dt(struct device *dev,
return -ENODEV;
}
- if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
- bus_type = 0;
+ ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
+ if (ep0)
+ ret = of_property_read_u32(ep0, "bus-type", &bus_type);
if (bus_type == 5) /* bus type is Parallel(DSI) */
> + bus_type = 0;
> +
> + if (bus_type == 5) /* bus type is Parallel(DSI) */
> + pdata->is_dpi = 0;
> +
> + pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
> + "data-lanes");
> + if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> + pdata->mipi_lanes = MAX_LANES_SUPPORT;
> +
> + if (pdata->is_dpi)
> + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
> + else
> + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
> +
> + if (of_property_read_bool(np, "analogix,hdcp-support"))
> + pdata->hdcp_support = 1;
>
> ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> if (ret < 0) {
> @@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> {
> struct device *dev = &ctx->client->dev;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
> + DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
> +
> + if (ctx->pdata.panel_bridge)
> + return connector_status_connected;
>
> - return connector_status_connected;
> + return ctx->hpd_status ? connector_status_connected :
> + connector_status_disconnected;
> }
>
> static int anx7625_attach_dsi(struct anx7625_data *ctx)
> @@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> return -EINVAL;
> }
>
> - dsi->lanes = 4;
> + dsi->lanes = ctx->pdata.mipi_lanes;
> dsi->format = MIPI_DSI_FMT_RGB888;
> dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> @@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
> return -ENODEV;
> }
>
> - err = anx7625_attach_dsi(ctx);
> - if (err) {
> - DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> - return err;
> + if (!ctx->pdata.is_dpi) {
> + err = anx7625_attach_dsi(ctx);
> + if (err) {
> + DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> + return err;
> + }
> }
>
> if (ctx->pdata.panel_bridge) {
> @@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
>
> DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
>
> + /* No need fixup for external monitor */
> + if (!ctx->pdata.panel_bridge)
> + return true;
> +
> hsync = mode->hsync_end - mode->hsync_start;
> hfp = mode->hsync_start - mode->hdisplay;
> hbp = mode->htotal - mode->hsync_end;
> @@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
>
> platform->bridge.funcs = &anx7625_bridge_funcs;
> platform->bridge.of_node = client->dev.of_node;
> - platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
> - platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
> + platform->bridge.ops = DRM_BRIDGE_OP_EDID;
> + if (!platform->pdata.panel_bridge)
> + platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
> + DRM_BRIDGE_OP_DETECT;
> + platform->bridge.type = platform->pdata.panel_bridge ?
> + DRM_MODE_CONNECTOR_eDP :
> + DRM_MODE_CONNECTOR_DisplayPort;
> drm_bridge_add(&platform->bridge);
>
> DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 193ad86..127081e 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -141,12 +141,20 @@
> #define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
>
> /******** END of I2C Address 0x72 *********/
> +
> +/***************************************************************/
> +/* Register definition of device address 0x7a */
> +#define DP_TX_SWING_REG_CNT 0x14
> +#define DP_TX_LANE0_SWING_REG0 0x00
> +#define DP_TX_LANE1_SWING_REG0 0x14
> +/******** END of I2C Address 0x7a *********/
> +
> /***************************************************************/
> /* Register definition of device address 0x7e */
>
> #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
>
> -#define FLASH_LOAD_STA 0x05
> +#define FLASH_LOAD_STA 0x05
> #define FLASH_LOAD_STA_CHK BIT(7)
>
> #define XTAL_FRQ_SEL 0x3F
> @@ -347,11 +355,20 @@ struct s_edid_data {
>
> /***************** Display End *****************/
>
> +#define MAX_LANES_SUPPORT 4
> +
> struct anx7625_platform_data {
> struct gpio_desc *gpio_p_on;
> struct gpio_desc *gpio_reset;
> struct drm_bridge *panel_bridge;
> int intp_irq;
> + int is_dpi;
> + int mipi_lanes;
> + int hdcp_support;
> + int dp_lane0_swing_reg_cnt;
> + int lane0_reg_data[DP_TX_SWING_REG_CNT];
> + int dp_lane1_swing_reg_cnt;
> + int lane1_reg_data[DP_TX_SWING_REG_CNT];
> u32 low_power_mode;
> struct device_node *mipi_host_node;
> };
> @@ -371,6 +388,7 @@ struct anx7625_data {
> atomic_t power_status;
> int hpd_status;
> int hpd_high_cnt;
> + int hdcp_en;
> /* Lock for work queue */
> struct mutex lock;
> struct i2c_client *client;
> --
> 2.7.4
>
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-02-24 9:55 ` Hsin-Yi Wang
@ 2021-02-24 10:42 ` Hsin-Yi Wang
2021-02-25 3:08 ` Xin Ji
1 sibling, 0 replies; 10+ messages in thread
From: Hsin-Yi Wang @ 2021-02-24 10:42 UTC (permalink / raw)
To: Xin Ji
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Neil Armstrong, lkml, dri-devel, Vasily Khoruzhick,
Andrzej Hajda, Boris Brezillon, Torsten Duwe, Laurent Pinchart,
Daniel Vetter, Sam Ravnborg, Dan Carpenter, Marek Szyprowski
On Wed, Feb 24, 2021 at 5:55 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> On Thu, Jan 28, 2021 at 11:10 AM Xin Ji <xji@analogixsemi.com> wrote:
> >
> > Add MIPI rx DPI input support
> >
> > Reported-by: kernel test robot <lkp@intel.com>
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > ---
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
> > 2 files changed, 285 insertions(+), 61 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 04536cc..628ae43 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> > return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> > }
> >
> > -static int anx7625_write_and_or(struct anx7625_data *ctx,
> > - struct i2c_client *client,
> > - u8 offset, u8 and_mask, u8 or_mask)
> > +static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> > {
> > - int val;
> > + int i, ret;
> >
> > - val = anx7625_reg_read(ctx, client, offset);
> > - if (val < 0)
> > - return val;
> > + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > + AUDIO_CONTROL_REGISTER, 0x80);
> > + for (i = 0; i < 13; i++)
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_BIT_MATRIX_12 + i,
> > + 0x18 + i);
> >
> > - return anx7625_reg_write(ctx, client,
> > - offset, (val & and_mask) | (or_mask));
> > + return ret;
> > }
> >
> > static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
> > @@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> > return 0;
> > }
> >
> > +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> > + u8 addrh, u8 addrm, u8 addrl,
> > + u8 len, u8 *buf)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > + u8 cmd;
> > +
> > + if (len > MAX_DPCD_BUFFER_SIZE) {
> > + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> > + return -EINVAL;
> > + }
> > +
> > + cmd = ((len - 1) << 4) | 0x09;
> > +
> > + /* Set command and length */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_COMMAND, cmd);
> > +
> > + /* Set aux access address */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_7_0, addrl);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_15_8, addrm);
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_19_16, addrh);
> > +
> > + /* Enable aux access */
> > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> > +
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> > + return -EIO;
> > + }
> > +
> > + usleep_range(2000, 2100);
> > +
> > + ret = wait_aux_op_finish(ctx);
> > + if (ret) {
> > + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_BUFF_START, len, buf);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> > + return -EIO;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > u8 status)
> > {
> > @@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > return ret;
> > }
> >
> > -static int anx7625_config_audio_input(struct anx7625_data *ctx)
> > -{
> > - struct device *dev = &ctx->client->dev;
> > - int ret;
> > -
> > - /* Channel num */
> > - ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
> > -
> > - /* FS */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_4,
> > - 0xf0, AUDIO_FS_48K);
> > - /* Word length */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_5,
> > - 0xf0, AUDIO_W_LEN_24_24MAX);
> > - /* I2S */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
> > - ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
> > - /* Audio change flag */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > - AP_AV_STATUS, AP_AUDIO_CHG);
> > -
> > - if (ret < 0)
> > - DRM_DEV_ERROR(dev, "fail to config audio.\n");
> > -
> > - return ret;
> > -}
> > -
> > /* Reduction of fraction a/b */
> > static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
> > {
> > @@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> > ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > MIPI_LANE_CTRL_0, 0xfc);
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
> > - MIPI_LANE_CTRL_0, 3);
> > + MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
> >
> > /* Htotal */
> > htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
> > @@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
> > return ret;
> > }
> >
> > +static int anx7625_api_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + u16 freq = ctx->dt.pixelclock.min / 1000;
> > + int ret;
> > +
> > + /* configure pixel clock */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_L, freq & 0xFF);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_H, (freq >> 8));
> > +
> > + /* set DPI mode */
> > + /* set to DPI PLL module sel */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_9, 0x20);
> > + /* power down MIPI */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_LANE_CTRL_10, 0x08);
> > + /* enable DPI mode */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_18, 0x1C);
> > + /* set first edge */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_CONTROL_0, 0x06);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
> > +
> > + /* DSC disable */
> > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + R_DSC_CTRL_0, ~DSC_EN);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_config_bit_matrix(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_api_dpi_config(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
> > + return ret;
> > + }
> > +
> > + /* set MIPI RX EN */
> > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, AP_MIPI_RX_EN);
> > + /* clear mute flag */
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> > +{
> > + u8 bcap;
> > + struct device *dev = &ctx->client->dev;
> > +
> > + if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
> > + DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
> > + ctx->pdata.hdcp_support, ctx->hdcp_en);
> > + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> > + if (!(bcap & 0x01)) {
> > + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> > +
> > + return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> > +}
> > +
> > static void anx7625_dp_start(struct anx7625_data *ctx)
> > {
> > int ret;
> > @@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> > return;
> > }
> >
> > - anx7625_config_audio_input(ctx);
> > + /* HDCP config */
> > + anx7625_hdcp_setting(ctx);
> >
> > - ret = anx7625_dsi_config(ctx);
> > + if (ctx->pdata.is_dpi)
> > + ret = anx7625_dpi_config(ctx);
> > + else
> > + ret = anx7625_dsi_config(ctx);
> >
> > if (ret < 0)
> > DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> > @@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
> > return c;
> > }
> >
> > -static int edid_read(struct anx7625_data *ctx,
> > - u8 offset, u8 *pblock_buf)
> > +static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
> > {
> > int ret, cnt;
> > struct device *dev = &ctx->client->dev;
> > @@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
> >
> > if (state) {
> > atomic_inc(&ctx->power_status);
> > - if (atomic_read(&ctx->power_status) == 1)
> > + if (atomic_read(&ctx->power_status) == 1) {
> > anx7625_power_on_init(ctx);
> > + }
> > } else {
> > if (atomic_read(&ctx->power_status)) {
> > atomic_dec(&ctx->power_status);
> > @@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > return;
> > }
> >
> > + ctx->hpd_status = 1;
> > ctx->hpd_high_cnt++;
> >
> > /* Not support HDCP */
> > @@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> > /* Interrupt for DRM */
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> > - if (ret < 0)
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
> > return;
> > + }
> >
> > ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
> > if (ret < 0)
> > @@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
> > int ret, val;
> > struct device *dev = &ctx->client->dev;
> >
> > + /* Interrupt mode, no need poll HPD status, just return */
> > + if (ctx->pdata.intp_irq)
> > + return;
> > +
> > if (atomic_read(&ctx->power_status) != 1) {
> > DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
> > return;
> > @@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
> > ctx->slimport_edid_p.edid_block_num = -1;
> > }
> >
> > +static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE0_SWING_REG0 + i,
> > + ctx->pdata.lane0_reg_data[i] & 0xFF);
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE1_SWING_REG0 + i,
> > + ctx->pdata.lane1_reg_data[i] & 0xFF);
> > +}
> > +
> > static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > {
> > struct device *dev = &ctx->client->dev;
> > @@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > } else {
> > DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
> > anx7625_start_dp_work(ctx);
> > + anx7625_dp_adjust_swing(ctx);
> ctx->hpd_status = 1; is missing here
>
Sorry, this is not needed. It's added in anx7625_start_dp_work().
> > }
> > -
> > - ctx->hpd_status = 1;
> > }
> >
> > static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
> > @@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
> > return IRQ_HANDLED;
> > }
> >
> > +static int anx7625_get_swing_setting(struct device *dev,
> > + struct anx7625_platform_data *pdata)
> > +{
> > + int num_regs;
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane0-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane0_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
> > + pdata->lane0_reg_data, num_regs);
> > + }
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane1-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane1_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
> > + pdata->lane1_reg_data, num_regs);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_parse_dt(struct device *dev,
> > struct anx7625_platform_data *pdata)
> > {
> > struct device_node *np = dev->of_node;
> > struct drm_panel *panel;
> > int ret;
> > + int bus_type;
> > +
> > + anx7625_get_swing_setting(dev, pdata);
> >
> > + pdata->is_dpi = 1; /* default dpi mode */
> > pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> > if (!pdata->mipi_host_node) {
> > DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> > return -ENODEV;
> > }
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
> > + if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
>
> According to previous patch, bus-type is added in endpoint node
> instead of remote node (dsi), so this part should be:
>
> struct device_node *np = dev->of_node, *ep0;
>
> ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> of_property_read_u32(ep0, "bus-type", &bus_type);
>
> I modified it based on this patch:
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
> b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index f682b530dbfb6..343cc0bf785f6 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -1541,10 +1542,10 @@ static void
> anx7625_unregister_usb_two_ports(struct anx7625_data *ctx) {
> static int anx7625_parse_dt(struct device *dev,
> struct anx7625_platform_data *pdata)
> {
> - struct device_node *np = dev->of_node;
> + struct device_node *np = dev->of_node, *ep0;
> struct drm_panel *panel;
> int ret;
> - int bus_type;
> + int bus_type = 0;
>
> anx7625_get_swing_setting(dev, pdata);
>
> @@ -1555,8 +1556,9 @@ static int anx7625_parse_dt(struct device *dev,
> return -ENODEV;
> }
>
> - if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
> - bus_type = 0;
> + ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> + if (ep0)
> + ret = of_property_read_u32(ep0, "bus-type", &bus_type);
>
>
> if (bus_type == 5) /* bus type is Parallel(DSI) */
>
>
> > + bus_type = 0;
> > +
> > + if (bus_type == 5) /* bus type is Parallel(DSI) */
> > + pdata->is_dpi = 0;
> > +
> > + pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
> > + "data-lanes");
> > + if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> > + pdata->mipi_lanes = MAX_LANES_SUPPORT;
> > +
> > + if (pdata->is_dpi)
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
> > + else
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
> > +
> > + if (of_property_read_bool(np, "analogix,hdcp-support"))
> > + pdata->hdcp_support = 1;
> >
> > ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> > if (ret < 0) {
> > @@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> > {
> > struct device *dev = &ctx->client->dev;
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
> > + DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
> > +
> > + if (ctx->pdata.panel_bridge)
> > + return connector_status_connected;
> >
> > - return connector_status_connected;
> > + return ctx->hpd_status ? connector_status_connected :
> > + connector_status_disconnected;
> > }
> >
> > static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > @@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > return -EINVAL;
> > }
> >
> > - dsi->lanes = 4;
> > + dsi->lanes = ctx->pdata.mipi_lanes;
> > dsi->format = MIPI_DSI_FMT_RGB888;
> > dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> > @@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
> > return -ENODEV;
> > }
> >
> > - err = anx7625_attach_dsi(ctx);
> > - if (err) {
> > - DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > - return err;
> > + if (!ctx->pdata.is_dpi) {
> > + err = anx7625_attach_dsi(ctx);
> > + if (err) {
> > + DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > + return err;
> > + }
> > }
> >
> > if (ctx->pdata.panel_bridge) {
> > @@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
> >
> > + /* No need fixup for external monitor */
> > + if (!ctx->pdata.panel_bridge)
> > + return true;
> > +
> > hsync = mode->hsync_end - mode->hsync_start;
> > hfp = mode->hsync_start - mode->hdisplay;
> > hbp = mode->htotal - mode->hsync_end;
> > @@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> >
> > platform->bridge.funcs = &anx7625_bridge_funcs;
> > platform->bridge.of_node = client->dev.of_node;
> > - platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
> > - platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
> > + platform->bridge.ops = DRM_BRIDGE_OP_EDID;
> > + if (!platform->pdata.panel_bridge)
> > + platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
> > + DRM_BRIDGE_OP_DETECT;
> > + platform->bridge.type = platform->pdata.panel_bridge ?
> > + DRM_MODE_CONNECTOR_eDP :
> > + DRM_MODE_CONNECTOR_DisplayPort;
> > drm_bridge_add(&platform->bridge);
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 193ad86..127081e 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -141,12 +141,20 @@
> > #define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
> >
> > /******** END of I2C Address 0x72 *********/
> > +
> > +/***************************************************************/
> > +/* Register definition of device address 0x7a */
> > +#define DP_TX_SWING_REG_CNT 0x14
> > +#define DP_TX_LANE0_SWING_REG0 0x00
> > +#define DP_TX_LANE1_SWING_REG0 0x14
> > +/******** END of I2C Address 0x7a *********/
> > +
> > /***************************************************************/
> > /* Register definition of device address 0x7e */
> >
> > #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
> >
> > -#define FLASH_LOAD_STA 0x05
> > +#define FLASH_LOAD_STA 0x05
> > #define FLASH_LOAD_STA_CHK BIT(7)
> >
> > #define XTAL_FRQ_SEL 0x3F
> > @@ -347,11 +355,20 @@ struct s_edid_data {
> >
> > /***************** Display End *****************/
> >
> > +#define MAX_LANES_SUPPORT 4
> > +
> > struct anx7625_platform_data {
> > struct gpio_desc *gpio_p_on;
> > struct gpio_desc *gpio_reset;
> > struct drm_bridge *panel_bridge;
> > int intp_irq;
> > + int is_dpi;
> > + int mipi_lanes;
> > + int hdcp_support;
> > + int dp_lane0_swing_reg_cnt;
> > + int lane0_reg_data[DP_TX_SWING_REG_CNT];
> > + int dp_lane1_swing_reg_cnt;
> > + int lane1_reg_data[DP_TX_SWING_REG_CNT];
> > u32 low_power_mode;
> > struct device_node *mipi_host_node;
> > };
> > @@ -371,6 +388,7 @@ struct anx7625_data {
> > atomic_t power_status;
> > int hpd_status;
> > int hpd_high_cnt;
> > + int hdcp_en;
> > /* Lock for work queue */
> > struct mutex lock;
> > struct i2c_client *client;
> > --
> > 2.7.4
> >
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support
2021-02-24 9:55 ` Hsin-Yi Wang
2021-02-24 10:42 ` Hsin-Yi Wang
@ 2021-02-25 3:08 ` Xin Ji
1 sibling, 0 replies; 10+ messages in thread
From: Xin Ji @ 2021-02-25 3:08 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: devel, Nicolas Boichat, Jernej Skrabec, Sheng Pan, Jonas Karlman,
David Airlie, Bernie Liang, dri-devel, Neil Armstrong,
linux-kernel, Robert Foss, Vasily Khoruzhick, Andrzej Hajda,
Boris Brezillon, Torsten Duwe, Laurent Pinchart, Daniel Vetter,
Sam Ravnborg, Dan Carpenter, Marek Szyprowski
Hi Hsin-Yi, thanks for the comment, I'll change it in the next serial.
As video-interfaces.yaml not exist in drm-next, I'm waiting for 5.12-rc1 to
apply to drm-misc, then I'll upstream patch v5.
Thanks,
Xin
On Wed, Feb 24, 2021 at 05:55:39PM +0800, Hsin-Yi Wang wrote:
> On Thu, Jan 28, 2021 at 11:10 AM Xin Ji <xji@analogixsemi.com> wrote:
> >
> > Add MIPI rx DPI input support
> >
> > Reported-by: kernel test robot <lkp@intel.com>
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > ---
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 326 ++++++++++++++++++++++++------
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +-
> > 2 files changed, 285 insertions(+), 61 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 04536cc..628ae43 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -150,18 +150,18 @@ static int anx7625_write_and(struct anx7625_data *ctx,
> > return anx7625_reg_write(ctx, client, offset, (val & (mask)));
> > }
> >
> > -static int anx7625_write_and_or(struct anx7625_data *ctx,
> > - struct i2c_client *client,
> > - u8 offset, u8 and_mask, u8 or_mask)
> > +static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
> > {
> > - int val;
> > + int i, ret;
> >
> > - val = anx7625_reg_read(ctx, client, offset);
> > - if (val < 0)
> > - return val;
> > + ret = anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > + AUDIO_CONTROL_REGISTER, 0x80);
> > + for (i = 0; i < 13; i++)
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_BIT_MATRIX_12 + i,
> > + 0x18 + i);
> >
> > - return anx7625_reg_write(ctx, client,
> > - offset, (val & and_mask) | (or_mask));
> > + return ret;
> > }
> >
> > static int anx7625_read_ctrl_status_p0(struct anx7625_data *ctx)
> > @@ -195,6 +195,60 @@ static int wait_aux_op_finish(struct anx7625_data *ctx)
> > return 0;
> > }
> >
> > +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> > + u8 addrh, u8 addrm, u8 addrl,
> > + u8 len, u8 *buf)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > + u8 cmd;
> > +
> > + if (len > MAX_DPCD_BUFFER_SIZE) {
> > + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> > + return -EINVAL;
> > + }
> > +
> > + cmd = ((len - 1) << 4) | 0x09;
> > +
> > + /* Set command and length */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_COMMAND, cmd);
> > +
> > + /* Set aux access address */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_7_0, addrl);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_15_8, addrm);
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_ADDR_19_16, addrh);
> > +
> > + /* Enable aux access */
> > + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> > +
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> > + return -EIO;
> > + }
> > +
> > + usleep_range(2000, 2100);
> > +
> > + ret = wait_aux_op_finish(ctx);
> > + if (ret) {
> > + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> > + AP_AUX_BUFF_START, len, buf);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> > + return -EIO;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > u8 status)
> > {
> > @@ -219,38 +273,6 @@ static int anx7625_video_mute_control(struct anx7625_data *ctx,
> > return ret;
> > }
> >
> > -static int anx7625_config_audio_input(struct anx7625_data *ctx)
> > -{
> > - struct device *dev = &ctx->client->dev;
> > - int ret;
> > -
> > - /* Channel num */
> > - ret = anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_CH_2 << 5);
> > -
> > - /* FS */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_4,
> > - 0xf0, AUDIO_FS_48K);
> > - /* Word length */
> > - ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_5,
> > - 0xf0, AUDIO_W_LEN_24_24MAX);
> > - /* I2S */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CHANNEL_STATUS_6, I2S_SLAVE_MODE);
> > - ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
> > - AUDIO_CONTROL_REGISTER, ~TDM_TIMING_MODE);
> > - /* Audio change flag */
> > - ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > - AP_AV_STATUS, AP_AUDIO_CHG);
> > -
> > - if (ret < 0)
> > - DRM_DEV_ERROR(dev, "fail to config audio.\n");
> > -
> > - return ret;
> > -}
> > -
> > /* Reduction of fraction a/b */
> > static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
> > {
> > @@ -410,7 +432,7 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
> > ret |= anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > MIPI_LANE_CTRL_0, 0xfc);
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client,
> > - MIPI_LANE_CTRL_0, 3);
> > + MIPI_LANE_CTRL_0, ctx->pdata.mipi_lanes - 1);
> >
> > /* Htotal */
> > htotal = ctx->dt.hactive.min + ctx->dt.hfront_porch.min +
> > @@ -595,6 +617,101 @@ static int anx7625_dsi_config(struct anx7625_data *ctx)
> > return ret;
> > }
> >
> > +static int anx7625_api_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + u16 freq = ctx->dt.pixelclock.min / 1000;
> > + int ret;
> > +
> > + /* configure pixel clock */
> > + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_L, freq & 0xFF);
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> > + PIXEL_CLOCK_H, (freq >> 8));
> > +
> > + /* set DPI mode */
> > + /* set to DPI PLL module sel */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_9, 0x20);
> > + /* power down MIPI */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_LANE_CTRL_10, 0x08);
> > + /* enable DPI mode */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> > + MIPI_DIGITAL_PLL_18, 0x1C);
> > + /* set first edge */
> > + ret |= anx7625_reg_write(ctx, ctx->i2c.tx_p2_client,
> > + VIDEO_CONTROL_0, 0x06);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : dpi phy set failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_dpi_config(struct anx7625_data *ctx)
> > +{
> > + struct device *dev = &ctx->client->dev;
> > + int ret;
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "config dpi\n");
> > +
> > + /* DSC disable */
> > + ret = anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + R_DSC_CTRL_0, ~DSC_EN);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "IO error : disable dsc failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_config_bit_matrix(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "config bit matrix failed.\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7625_api_dpi_config(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "mipi phy(dpi) setup failed.\n");
> > + return ret;
> > + }
> > +
> > + /* set MIPI RX EN */
> > + ret = anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, AP_MIPI_RX_EN);
> > + /* clear mute flag */
> > + ret |= anx7625_write_and(ctx, ctx->i2c.rx_p0_client,
> > + AP_AV_STATUS, (u8)~AP_MIPI_MUTE);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(dev, "IO error : enable mipi rx failed.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> > +{
> > + u8 bcap;
> > + struct device *dev = &ctx->client->dev;
> > +
> > + if (!ctx->pdata.hdcp_support || !ctx->hdcp_en) {
> > + DRM_DEV_DEBUG_DRIVER(dev, "hdcp_support(%d), hdcp_en(%d)\n",
> > + ctx->pdata.hdcp_support, ctx->hdcp_en);
> > + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> > + if (!(bcap & 0x01)) {
> > + DRM_WARN("downstream not support HDCP 1.4, cap(%x).\n", bcap);
> > + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> > + 0xee, 0x9f);
> > + }
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> > +
> > + return anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> > +}
> > +
> > static void anx7625_dp_start(struct anx7625_data *ctx)
> > {
> > int ret;
> > @@ -605,9 +722,13 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> > return;
> > }
> >
> > - anx7625_config_audio_input(ctx);
> > + /* HDCP config */
> > + anx7625_hdcp_setting(ctx);
> >
> > - ret = anx7625_dsi_config(ctx);
> > + if (ctx->pdata.is_dpi)
> > + ret = anx7625_dpi_config(ctx);
> > + else
> > + ret = anx7625_dsi_config(ctx);
> >
> > if (ret < 0)
> > DRM_DEV_ERROR(dev, "MIPI phy setup error.\n");
> > @@ -688,8 +809,7 @@ static int sp_tx_get_edid_block(struct anx7625_data *ctx)
> > return c;
> > }
> >
> > -static int edid_read(struct anx7625_data *ctx,
> > - u8 offset, u8 *pblock_buf)
> > +static int edid_read(struct anx7625_data *ctx, u8 offset, u8 *pblock_buf)
> > {
> > int ret, cnt;
> > struct device *dev = &ctx->client->dev;
> > @@ -992,8 +1112,9 @@ static void anx7625_chip_control(struct anx7625_data *ctx, int state)
> >
> > if (state) {
> > atomic_inc(&ctx->power_status);
> > - if (atomic_read(&ctx->power_status) == 1)
> > + if (atomic_read(&ctx->power_status) == 1) {
> > anx7625_power_on_init(ctx);
> > + }
> > } else {
> > if (atomic_read(&ctx->power_status)) {
> > atomic_dec(&ctx->power_status);
> > @@ -1051,6 +1172,7 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > return;
> > }
> >
> > + ctx->hpd_status = 1;
> > ctx->hpd_high_cnt++;
> >
> > /* Not support HDCP */
> > @@ -1060,8 +1182,10 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx)
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> > /* Interrupt for DRM */
> > ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> > - if (ret < 0)
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "fail to setting HDCP/auth\n");
> > return;
> > + }
> >
> > ret = anx7625_reg_read(ctx, ctx->i2c.rx_p1_client, 0x86);
> > if (ret < 0)
> > @@ -1080,6 +1204,10 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
> > int ret, val;
> > struct device *dev = &ctx->client->dev;
> >
> > + /* Interrupt mode, no need poll HPD status, just return */
> > + if (ctx->pdata.intp_irq)
> > + return;
> > +
> > if (atomic_read(&ctx->power_status) != 1) {
> > DRM_DEV_DEBUG_DRIVER(dev, "No need to poling HPD status.\n");
> > return;
> > @@ -1130,6 +1258,21 @@ static void anx7625_remove_edid(struct anx7625_data *ctx)
> > ctx->slimport_edid_p.edid_block_num = -1;
> > }
> >
> > +static void anx7625_dp_adjust_swing(struct anx7625_data *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane0_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE0_SWING_REG0 + i,
> > + ctx->pdata.lane0_reg_data[i] & 0xFF);
> > +
> > + for (i = 0; i < ctx->pdata.dp_lane1_swing_reg_cnt; i++)
> > + anx7625_reg_write(ctx, ctx->i2c.tx_p1_client,
> > + DP_TX_LANE1_SWING_REG0 + i,
> > + ctx->pdata.lane1_reg_data[i] & 0xFF);
> > +}
> > +
> > static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > {
> > struct device *dev = &ctx->client->dev;
> > @@ -1145,9 +1288,8 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on)
> > } else {
> > DRM_DEV_DEBUG_DRIVER(dev, " HPD high\n");
> > anx7625_start_dp_work(ctx);
> > + anx7625_dp_adjust_swing(ctx);
> ctx->hpd_status = 1; is missing here
Already move it to anx7625_start_dp_work function.
>
> > }
> > -
> > - ctx->hpd_status = 1;
> > }
> >
> > static int anx7625_hpd_change_detect(struct anx7625_data *ctx)
> > @@ -1224,20 +1366,69 @@ static irqreturn_t anx7625_intr_hpd_isr(int irq, void *data)
> > return IRQ_HANDLED;
> > }
> >
> > +static int anx7625_get_swing_setting(struct device *dev,
> > + struct anx7625_platform_data *pdata)
> > +{
> > + int num_regs;
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane0-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane0_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane0-swing",
> > + pdata->lane0_reg_data, num_regs);
> > + }
> > +
> > + if (of_get_property(dev->of_node,
> > + "analogix,lane1-swing", &num_regs)) {
> > + if (num_regs > DP_TX_SWING_REG_CNT)
> > + num_regs = DP_TX_SWING_REG_CNT;
> > +
> > + pdata->dp_lane1_swing_reg_cnt = num_regs;
> > + of_property_read_u32_array(dev->of_node, "analogix,lane1-swing",
> > + pdata->lane1_reg_data, num_regs);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int anx7625_parse_dt(struct device *dev,
> > struct anx7625_platform_data *pdata)
> > {
> > struct device_node *np = dev->of_node;
> > struct drm_panel *panel;
> > int ret;
> > + int bus_type;
> > +
> > + anx7625_get_swing_setting(dev, pdata);
> >
> > + pdata->is_dpi = 1; /* default dpi mode */
> > pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> > if (!pdata->mipi_host_node) {
> > DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> > return -ENODEV;
> > }
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "found dsi host node.\n");
> > + if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
>
> According to previous patch, bus-type is added in endpoint node
> instead of remote node (dsi), so this part should be:
>
> struct device_node *np = dev->of_node, *ep0;
>
> ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> of_property_read_u32(ep0, "bus-type", &bus_type);
>
> I modified it based on this patch:
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
> b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index f682b530dbfb6..343cc0bf785f6 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -1541,10 +1542,10 @@ static void
> anx7625_unregister_usb_two_ports(struct anx7625_data *ctx) {
> static int anx7625_parse_dt(struct device *dev,
> struct anx7625_platform_data *pdata)
> {
> - struct device_node *np = dev->of_node;
> + struct device_node *np = dev->of_node, *ep0;
> struct drm_panel *panel;
> int ret;
> - int bus_type;
> + int bus_type = 0;
>
> anx7625_get_swing_setting(dev, pdata);
>
> @@ -1555,8 +1556,9 @@ static int anx7625_parse_dt(struct device *dev,
> return -ENODEV;
> }
>
> - if (of_property_read_u32(pdata->mipi_host_node, "bus-type", &bus_type))
> - bus_type = 0;
> + ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> + if (ep0)
> + ret = of_property_read_u32(ep0, "bus-type", &bus_type);
>
>
> if (bus_type == 5) /* bus type is Parallel(DSI) */
OK, I'll merge it into next serial, thanks!
>
>
> > + bus_type = 0;
> > +
> > + if (bus_type == 5) /* bus type is Parallel(DSI) */
> > + pdata->is_dpi = 0;
> > +
> > + pdata->mipi_lanes = of_property_count_u32_elems(pdata->mipi_host_node,
> > + "data-lanes");
> > + if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> > + pdata->mipi_lanes = MAX_LANES_SUPPORT;
> > +
> > + if (pdata->is_dpi)
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DPI host node.\n");
> > + else
> > + DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
> > +
> > + if (of_property_read_bool(np, "analogix,hdcp-support"))
> > + pdata->hdcp_support = 1;
> >
> > ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
> > if (ret < 0) {
> > @@ -1300,9 +1491,13 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
> > {
> > struct device *dev = &ctx->client->dev;
> >
> > - DRM_DEV_DEBUG_DRIVER(dev, "sink detect, return connected\n");
> > + DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
> > +
> > + if (ctx->pdata.panel_bridge)
> > + return connector_status_connected;
> >
> > - return connector_status_connected;
> > + return ctx->hpd_status ? connector_status_connected :
> > + connector_status_disconnected;
> > }
> >
> > static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > @@ -1330,7 +1525,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > return -EINVAL;
> > }
> >
> > - dsi->lanes = 4;
> > + dsi->lanes = ctx->pdata.mipi_lanes;
> > dsi->format = MIPI_DSI_FMT_RGB888;
> > dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> > @@ -1376,10 +1571,12 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge,
> > return -ENODEV;
> > }
> >
> > - err = anx7625_attach_dsi(ctx);
> > - if (err) {
> > - DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > - return err;
> > + if (!ctx->pdata.is_dpi) {
> > + err = anx7625_attach_dsi(ctx);
> > + if (err) {
> > + DRM_DEV_ERROR(dev, "Fail to attach to dsi : %d\n", err);
> > + return err;
> > + }
> > }
> >
> > if (ctx->pdata.panel_bridge) {
> > @@ -1478,6 +1675,10 @@ static bool anx7625_bridge_mode_fixup(struct drm_bridge *bridge,
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "drm mode fixup set\n");
> >
> > + /* No need fixup for external monitor */
> > + if (!ctx->pdata.panel_bridge)
> > + return true;
> > +
> > hsync = mode->hsync_end - mode->hsync_start;
> > hfp = mode->hsync_start - mode->hdisplay;
> > hbp = mode->htotal - mode->hsync_end;
> > @@ -1786,8 +1987,13 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> >
> > platform->bridge.funcs = &anx7625_bridge_funcs;
> > platform->bridge.of_node = client->dev.of_node;
> > - platform->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
> > - platform->bridge.type = DRM_MODE_CONNECTOR_eDP;
> > + platform->bridge.ops = DRM_BRIDGE_OP_EDID;
> > + if (!platform->pdata.panel_bridge)
> > + platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
> > + DRM_BRIDGE_OP_DETECT;
> > + platform->bridge.type = platform->pdata.panel_bridge ?
> > + DRM_MODE_CONNECTOR_eDP :
> > + DRM_MODE_CONNECTOR_DisplayPort;
> > drm_bridge_add(&platform->bridge);
> >
> > DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 193ad86..127081e 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -141,12 +141,20 @@
> > #define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
> >
> > /******** END of I2C Address 0x72 *********/
> > +
> > +/***************************************************************/
> > +/* Register definition of device address 0x7a */
> > +#define DP_TX_SWING_REG_CNT 0x14
> > +#define DP_TX_LANE0_SWING_REG0 0x00
> > +#define DP_TX_LANE1_SWING_REG0 0x14
> > +/******** END of I2C Address 0x7a *********/
> > +
> > /***************************************************************/
> > /* Register definition of device address 0x7e */
> >
> > #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
> >
> > -#define FLASH_LOAD_STA 0x05
> > +#define FLASH_LOAD_STA 0x05
> > #define FLASH_LOAD_STA_CHK BIT(7)
> >
> > #define XTAL_FRQ_SEL 0x3F
> > @@ -347,11 +355,20 @@ struct s_edid_data {
> >
> > /***************** Display End *****************/
> >
> > +#define MAX_LANES_SUPPORT 4
> > +
> > struct anx7625_platform_data {
> > struct gpio_desc *gpio_p_on;
> > struct gpio_desc *gpio_reset;
> > struct drm_bridge *panel_bridge;
> > int intp_irq;
> > + int is_dpi;
> > + int mipi_lanes;
> > + int hdcp_support;
> > + int dp_lane0_swing_reg_cnt;
> > + int lane0_reg_data[DP_TX_SWING_REG_CNT];
> > + int dp_lane1_swing_reg_cnt;
> > + int lane1_reg_data[DP_TX_SWING_REG_CNT];
> > u32 low_power_mode;
> > struct device_node *mipi_host_node;
> > };
> > @@ -371,6 +388,7 @@ struct anx7625_data {
> > atomic_t power_status;
> > int hpd_status;
> > int hpd_high_cnt;
> > + int hdcp_en;
> > /* Lock for work queue */
> > struct mutex lock;
> > struct i2c_client *client;
> > --
> > 2.7.4
> >
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-02-25 3:08 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-28 3:07 [PATCH v4 0/3] Add MIPI rx DPI support Xin Ji
2021-01-28 3:09 ` [PATCH v4 2/3] drm/bridge: anx7625: fix not correct return value Xin Ji
2021-02-04 12:28 ` Robert Foss
2021-02-05 11:40 ` Xin Ji
2021-01-28 3:10 ` [PATCH v4 3/3] drm/bridge: anx7625: add MIPI DPI input feature support Xin Ji
2021-02-05 12:33 ` Robert Foss
2021-02-18 5:40 ` Xin Ji
2021-02-24 9:55 ` Hsin-Yi Wang
2021-02-24 10:42 ` Hsin-Yi Wang
2021-02-25 3:08 ` Xin Ji
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).