All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bingbu Cao <bingbu.cao@linux.intel.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>, linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	rajmohan.mani@intel.com, Tomasz Figa <tfiga@chromium.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Bingbu Cao <bingbu.cao@intel.com>,
	Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>,
	Hyungwoo Yang <hyungwoo.yang@intel.com>,
	linux-media@vger.kernel.org
Subject: Re: [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off
Date: Fri, 29 Jan 2021 10:58:48 +0800	[thread overview]
Message-ID: <f2a3ed14-ecb8-1bab-a959-f63adb370ad6@linux.intel.com> (raw)
In-Reply-To: <20210128232729.16064-6-sakari.ailus@linux.intel.com>

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>

On 1/29/21 7:27 AM, Sakari Ailus wrote:
> From: Rajmohan Mani <rajmohan.mani@intel.com>
> 
> Tell ACPI device PM code that the driver supports the device being powered
> off when the driver's probe function is entered.
> 
> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  drivers/media/i2c/imx319.c | 72 +++++++++++++++++++++++---------------
>  1 file changed, 44 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
> index 8473c0bbb35d6..e0b22e9318fed 100644
> --- a/drivers/media/i2c/imx319.c
> +++ b/drivers/media/i2c/imx319.c
> @@ -140,6 +140,8 @@ struct imx319 {
>  
>  	/* Streaming on/off */
>  	bool streaming;
> +	/* True if the device has been identified */
> +	bool identified;
>  };
>  
>  static const struct imx319_reg imx319_global_regs[] = {
> @@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +/* Verify chip ID */
> +static int imx319_identify_module(struct imx319 *imx319)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
> +	int ret;
> +	u32 val;
> +
> +	if (imx319->identified)
> +		return 0;
> +
> +	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val != IMX319_CHIP_ID) {
> +		dev_err(&client->dev, "chip id mismatch: %x!=%x",
> +			IMX319_CHIP_ID, val);
> +		return -EIO;
> +	}
> +
> +	imx319->identified = true;
> +
> +	return 0;
> +}
> +
>  /* Start streaming */
>  static int imx319_start_streaming(struct imx319 *imx319)
>  {
> @@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319)
>  	const struct imx319_reg_list *reg_list;
>  	int ret;
>  
> +	ret = imx319_identify_module(imx319);
> +	if (ret)
> +		return ret;
> +
>  	/* Global Setting */
>  	reg_list = &imx319_global_setting;
>  	ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
> @@ -2208,26 +2239,6 @@ static int __maybe_unused imx319_resume(struct device *dev)
>  	return ret;
>  }
>  
> -/* Verify chip ID */
> -static int imx319_identify_module(struct imx319 *imx319)
> -{
> -	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
> -	int ret;
> -	u32 val;
> -
> -	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
> -	if (ret)
> -		return ret;
> -
> -	if (val != IMX319_CHIP_ID) {
> -		dev_err(&client->dev, "chip id mismatch: %x!=%x",
> -			IMX319_CHIP_ID, val);
> -		return -EIO;
> -	}
> -
> -	return 0;
> -}
> -
>  static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = {
>  	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
>  	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
> @@ -2422,6 +2433,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
>  static int imx319_probe(struct i2c_client *client)
>  {
>  	struct imx319 *imx319;
> +	bool low_power;
>  	int ret;
>  	u32 i;
>  
> @@ -2434,11 +2446,14 @@ static int imx319_probe(struct i2c_client *client)
>  	/* Initialize subdev */
>  	v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
>  
> -	/* Check module identity */
> -	ret = imx319_identify_module(imx319);
> -	if (ret) {
> -		dev_err(&client->dev, "failed to find sensor: %d", ret);
> -		goto error_probe;
> +	low_power = acpi_dev_state_low_power(&client->dev);
> +	if (!low_power) {
> +		/* Check module identity */
> +		ret = imx319_identify_module(imx319);
> +		if (ret) {
> +			dev_err(&client->dev, "failed to find sensor: %d", ret);
> +			goto error_probe;
> +		}
>  	}
>  
>  	imx319->hwcfg = imx319_get_hwcfg(&client->dev);
> @@ -2491,10 +2506,10 @@ static int imx319_probe(struct i2c_client *client)
>  		goto error_media_entity;
>  
>  	/*
> -	 * Device is already turned on by i2c-core with ACPI domain PM.
> -	 * Enable runtime PM and turn off the device.
> +	 * Don't set the device's state to active if it's in a low power state.
>  	 */
> -	pm_runtime_set_active(&client->dev);
> +	if (!low_power)
> +		pm_runtime_set_active(&client->dev);
>  	pm_runtime_enable(&client->dev);
>  	pm_runtime_idle(&client->dev);
>  
> @@ -2547,6 +2562,7 @@ static struct i2c_driver imx319_i2c_driver = {
>  	},
>  	.probe_new = imx319_probe,
>  	.remove = imx319_remove,
> +	.flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
>  };
>  module_i2c_driver(imx319_i2c_driver);
>  
> 

-- 
Best regards,
Bingbu Cao

  reply	other threads:[~2021-01-29  3:02 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03  8:15 [PATCH v8 0/6] Support running driver's probe for a device powered off Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 1/6] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 2/6] Documentation: ACPI: Document i2c-allow-low-power-probe _DSD property Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state Sakari Ailus
     [not found]   ` <0c2d4728-6e32-ef93-8961-381fe36cfdaa@linux.intel.com>
2020-09-11 13:01     ` Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 4/6] ov5670: Support probe whilst the device is in a " Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 5/6] media: i2c: imx319: Support probe while the device is off Sakari Ailus
2020-09-03  8:15 ` [PATCH v8 6/6] at24: Support probing while off Sakari Ailus
2020-09-09  9:35   ` Bartosz Golaszewski
2020-09-09 11:11     ` Wolfram Sang
2020-09-09 11:56       ` Bartosz Golaszewski
2020-09-09 12:16         ` Sakari Ailus
2020-09-11 12:11         ` Sakari Ailus
2020-10-06 11:20   ` Tomasz Figa
2020-10-06 11:23     ` Tomasz Figa
2020-09-11 12:49 ` [PATCH v8 0/6] Support running driver's probe for a device powered off Luca Ceresoli
2020-09-11 13:01   ` Sakari Ailus
2020-09-14  7:58     ` Luca Ceresoli
     [not found]       ` <20200914094727.GM26842@paasikivi.fi.intel.com>
2020-09-14 16:49         ` Luca Ceresoli
2020-09-23 11:08           ` Sakari Ailus
2020-09-23 15:37             ` Luca Ceresoli
2020-09-26 12:38         ` Tomasz Figa
2020-09-27 19:39           ` Wolfram Sang
2020-09-27 19:44             ` Tomasz Figa
2020-09-28 14:17               ` Rafael J. Wysocki
2020-09-28 16:49                 ` Tomasz Figa
2020-09-28 20:49                   ` Sakari Ailus
2020-09-26 12:46 ` Tomasz Figa
2021-01-28 23:27 ` [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state Sakari Ailus
     [not found]   ` <CAJZ5v0hdG1W0D5E6GbrTDiAjMyC0mSgb3Z2WEBy3hhb4iJhDNw@mail.gmail.com>
2021-01-29 16:45     ` Sakari Ailus
2021-01-29 16:57       ` Rafael J. Wysocki
2021-01-29 21:22         ` Sakari Ailus
2021-02-01 11:44           ` Rafael J. Wysocki
2021-01-28 23:27 ` [PATCH v9 2/7] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 3/7] Documentation: ACPI: Document _PRE object usage for enum power state Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 4/7] ACPI: Add a convenience function to tell a device is in low " Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 5/7] ov5670: Support probe whilst the device is in a " Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off Sakari Ailus
2021-01-29  2:58   ` Bingbu Cao [this message]
2021-01-28 23:27 ` [PATCH v9 7/7] at24: Support probing while off Sakari Ailus
     [not found]   ` <CAMpxmJVTPgvxOVdTkmt4VjUnGabNBKauKF_DKtnnkV6O0QYTWA@mail.gmail.com>
     [not found]     ` <20210129121955.GH32460@paasikivi.fi.intel.com>
2021-02-01  8:57       ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f2a3ed14-ecb8-1bab-a959-f63adb370ad6@linux.intel.com \
    --to=bingbu.cao@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=bingbu.cao@intel.com \
    --cc=chiranjeevi.rapolu@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hyungwoo.yang@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=rajmohan.mani@intel.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tfiga@chromium.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.