All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Terry Bowman <terry.bowman@amd.com>, <alison.schofield@intel.com>,
	<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
	<bwidawsk@kernel.org>, <dan.j.williams@intel.com>,
	<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <rrichter@amd.com>, <linux-kernel@vger.kernel.org>,
	<bhelgaas@google.com>
Subject: Re: [PATCH v7 24/27] cxl/pci: Disable root port interrupts in RCH mode
Date: Fri, 23 Jun 2023 15:08:51 -0700	[thread overview]
Message-ID: <fc4dc234-6d66-4ad8-0c6f-3f0b0119087e@intel.com> (raw)
In-Reply-To: <20230622205523.85375-25-terry.bowman@amd.com>



On 6/22/23 13:55, Terry Bowman wrote:
> The RCH root port contains root command AER registers that should not be
> enabled.[1] Disable these to prevent root port interrupts.
> 
> [1] CXL 3.0 - 12.2.1.1 RCH Downstream Port-detected Errors
> 
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
>   drivers/cxl/core/core.h |  6 ++++++
>   drivers/cxl/core/pci.c  | 29 +++++++++++++++++++++++++++++
>   drivers/cxl/core/port.c |  3 +++
>   3 files changed, 38 insertions(+)
> 
> diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
> index 87467c633123..880bac9db376 100644
> --- a/drivers/cxl/core/core.h
> +++ b/drivers/cxl/core/core.h
> @@ -86,4 +86,10 @@ enum cxl_poison_trace_type {
>   	CXL_POISON_TRACE_CLEAR,
>   };
>   
> +#ifdef CONFIG_PCIEAER_CXL
> +void cxl_disable_rch_root_ints(struct cxl_dport *dport);
> +#else
> +static inline void cxl_disable_rch_root_ints(struct cxl_dport *dport) { };
> +#endif
> +
>   #endif /* __CXL_CORE_H__ */
> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
> index 9e0eba5ccfc4..897830c19d1a 100644
> --- a/drivers/cxl/core/pci.c
> +++ b/drivers/cxl/core/pci.c
> @@ -838,6 +838,35 @@ static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds)
>   		cxl_handle_rdport_ras(cxlds, dport);
>   }
>   
> +void cxl_disable_rch_root_ints(struct cxl_dport *dport)
> +{
> +	void __iomem *aer_base = dport->regs.dport_aer;
> +	struct pci_host_bridge *bridge;
> +	u32 aer_cmd_mask, aer_cmd;
> +
> +	if (!aer_base)
> +		return;
> +
> +	bridge = to_pci_host_bridge(dport->dport_dev);
> +
> +	/*
> +	 * Disable RCH root port command interrupts.
> +	 * CXL 3.0 12.2.1.1 - RCH Downstream Port-detected Errors
> +	 *
> +	 * This sequence may not be necessary. CXL spec states disabling
> +	 * the root cmd register's interrupts is required. But, PCI spec
> +	 * shows these are disabled by default on reset.
> +	 */
> +	if (bridge->native_cxl_error) {
> +		aer_cmd_mask = (PCI_ERR_ROOT_CMD_COR_EN |
> +				PCI_ERR_ROOT_CMD_NONFATAL_EN |
> +				PCI_ERR_ROOT_CMD_FATAL_EN);
> +		aer_cmd = readl(aer_base + PCI_ERR_ROOT_COMMAND);
> +		aer_cmd &= ~aer_cmd_mask;
> +		writel(aer_cmd, aer_base + PCI_ERR_ROOT_COMMAND);
> +	}
> +}
> +
>   #else
>   static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds) { }
>   #endif
> diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> index a92794e6b7b4..2fdfb31f16c1 100644
> --- a/drivers/cxl/core/port.c
> +++ b/drivers/cxl/core/port.c
> @@ -1037,6 +1037,9 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
>   
>   	cxl_dport_map_regs(dport);
>   
> +	if (dport->rch)
> +		cxl_disable_rch_root_ints(dport);
> +
>   	cond_cxl_root_lock(port);
>   	rc = add_dport(port, dport);
>   	cond_cxl_root_unlock(port);

  reply	other threads:[~2023-06-23 22:09 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-22 20:54 [PATCH v7 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 20:54 ` [PATCH v7 01/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-25 19:34   ` Dan Williams
2023-06-22 20:54 ` [PATCH v7 02/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 20:54 ` [PATCH v7 03/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 04/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 20:55 ` [PATCH v7 05/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 20:55 ` [PATCH v7 06/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 20:55 ` [PATCH v7 07/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 20:55 ` [PATCH v7 08/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 20:55 ` [PATCH v7 09/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 10/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 11/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 12/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 20:55 ` [PATCH v7 13/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 20:55 ` [PATCH v7 14/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-23 13:32   ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 15/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-22 20:55 ` [PATCH v7 16/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-25 17:38   ` Dan Williams
2023-06-26 14:16     ` Terry Bowman
2023-06-30 19:51     ` Robert Richter
2023-06-30 19:56     ` Robert Richter
2023-07-03  3:55       ` Jonathan Cameron
2023-06-22 20:55 ` [PATCH v7 17/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-22 20:55 ` [PATCH v7 18/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-22 20:55 ` [PATCH v7 19/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 20:55 ` [PATCH v7 20/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-23 21:22   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 21/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-23 21:43   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 22/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-23 21:58   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 23/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-23 22:07   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 24/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-23 22:08   ` Dave Jiang [this message]
2023-06-22 20:55 ` [PATCH v7 25/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-23 22:16   ` Dave Jiang
2023-06-25  5:47     ` Dan Williams
2023-06-22 20:55 ` [PATCH v7 26/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-23 22:18   ` Dave Jiang
2023-06-22 20:55 ` [PATCH v7 27/27] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-23 13:30   ` Jonathan Cameron
2023-06-23 22:19   ` Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fc4dc234-6d66-4ad8-0c6f-3f0b0119087e@intel.com \
    --to=dave.jiang@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bwidawsk@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rrichter@amd.com \
    --cc=terry.bowman@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.