[PATCH v2 0/5] zbd: Support zone reset by trim

[PATCH v2 0/5] zbd: Support zone reset by trim

[Shin'ichiro Kawasaki]

Trim workload is currently not supported for zonemode=zbd. This patch series
enables it by resetting zones for trim I/Os. This allows fio to measure
performance of zoned block devices using more realistic workloads which mixes
write and trim.

The first patch prepares for trim support by modifying the helper function
zbd_find_zone(). The second patch adds zone reset for trim. The third patch
enables trim workload for libzbc I/O engine. The fourth patch adds a test
case that exercises trim operation with zonemode=zbd.

Changes from v1:
* Separated HOWTO/man changes from 2nd patch as 4th patch
* Reflected various comments on the list

Shin'ichiro Kawasaki (5):
  zbd: Add min_bytes argument to zbd_find_zone()
  zbd: Support zone reset by trim
  engines/libzbc: Enable trim for libzbc I/O engine
  HOWTO/man: Describe trim support by zone reset for zoned devices
  t/zbd: Add test #58 to test zone reset by trim workload

 HOWTO                  |  9 +++++
 engines/libzbc.c       | 13 ++++---
 fio.1                  |  4 +-
 io_u.c                 |  9 +++++
 t/zbd/test-zbd-support | 26 +++++++++++++
 zbd.c                  | 85 +++++++++++++++++++++++++++++++++++-------
 zbd.h                  |  2 +
 7 files changed, 127 insertions(+), 21 deletions(-)

-- 
2.31.1

[PATCH v2 1/5] zbd: Add min_bytes argument to zbd_find_zone()

[Shin'ichiro Kawasaki]

The helper function zbd_find_zone() finds a zone with at least
min_bs[DDIR_READ] bytes of readable data before the zone write pointer.
This patch generalizes this function to allow finding a non-empty zone.
To do so, add the min_bytes argument to specify the minimum readable
data of a zone to filter the search. Specifying 1 to min_bytes then
become equivalent to finding a non-empty zone.

This change will allow to reuse this function to find a suitable zone
for trim I/O.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
---
 zbd.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/zbd.c b/zbd.c
index 43f12b45..859c7feb 100644
--- a/zbd.c
+++ b/zbd.c
@@ -1414,18 +1414,16 @@ static struct fio_zone_info *zbd_replay_write_order(struct thread_data *td,
 }
 
 /*
- * Find another zone for which @io_u fits in the readable data in the zone.
- * Search in zones @zb + 1 .. @zl. For random workload, also search in zones
- * @zb - 1 .. @zf.
+ * Find another zone which has @min_bytes of readable data. Search in zones
+ * @zb + 1 .. @zl. For random workload, also search in zones @zb - 1 .. @zf.
  *
  * Either returns NULL or returns a zone pointer. When the zone has write
  * pointer, hold the mutex for the zone.
  */
 static struct fio_zone_info *
-zbd_find_zone(struct thread_data *td, struct io_u *io_u,
+zbd_find_zone(struct thread_data *td, struct io_u *io_u, uint32_t min_bytes,
 	      struct fio_zone_info *zb, struct fio_zone_info *zl)
 {
-	const uint32_t min_bs = td->o.min_bs[io_u->ddir];
 	struct fio_file *f = io_u->file;
 	struct fio_zone_info *z1, *z2;
 	const struct fio_zone_info *const zf = get_zone(f, f->min_zone);
@@ -1438,7 +1436,7 @@ zbd_find_zone(struct thread_data *td, struct io_u *io_u,
 		if (z1 < zl && z1->cond != ZBD_ZONE_COND_OFFLINE) {
 			if (z1->has_wp)
 				zone_lock(td, f, z1);
-			if (z1->start + min_bs <= z1->wp)
+			if (z1->start + min_bytes <= z1->wp)
 				return z1;
 			if (z1->has_wp)
 				zone_unlock(z1);
@@ -1449,14 +1447,14 @@ zbd_find_zone(struct thread_data *td, struct io_u *io_u,
 		    z2->cond != ZBD_ZONE_COND_OFFLINE) {
 			if (z2->has_wp)
 				zone_lock(td, f, z2);
-			if (z2->start + min_bs <= z2->wp)
+			if (z2->start + min_bytes <= z2->wp)
 				return z2;
 			if (z2->has_wp)
 				zone_unlock(z2);
 		}
 	}
-	dprint(FD_ZBD, "%s: adjusting random read offset failed\n",
-	       f->file_name);
+	dprint(FD_ZBD, "%s: no zone has %d bytes of readable data\n",
+	       f->file_name, min_bytes);
 	return NULL;
 }
 
@@ -1785,7 +1783,7 @@ enum io_u_action zbd_adjust_block(struct thread_data *td, struct io_u *io_u)
 		    ((!td_random(td)) && (io_u->offset + min_bs > zb->wp))) {
 			zone_unlock(zb);
 			zl = get_zone(f, f->max_zone);
-			zb = zbd_find_zone(td, io_u, zb, zl);
+			zb = zbd_find_zone(td, io_u, min_bs, zb, zl);
 			if (!zb) {
 				dprint(FD_ZBD,
 				       "%s: zbd_find_zone(%lld, %llu) failed\n",
-- 
2.31.1

[PATCH v2 2/5] zbd: Support zone reset by trim

[Shin'ichiro Kawasaki]

Enable trim workload for zonemode=zbd by modifying do_io_u_trim() to
call zoned block device unique function zbd_do_io_u_trim() which resets
the target zone. This allows fio to emulate workloads which mix data
read/write and zone resets with zonemode=zbd.

To call reset zones, the trim I/O shall have offset aligned to zone
start and block size same as zone size. Reset zone is called only to
sequential write required zones and sequential write preferred zones.
Conventional zones are handled in same manner as regular block devices
by calling os_trim() function.

When zones are reset with random trim workload, choose only non-empty
zones as trim target. This avoids meaningless trim to empty zones and
makes the workload more realistic. To find the non-empty zones, utilize
zbd_find_zone() helper function which is already used for read workload,
specifying 1 byte as the minimum valid data size.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
---
 io_u.c |  9 ++++++++
 zbd.c  | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++++----
 zbd.h  |  2 ++
 3 files changed, 74 insertions(+), 4 deletions(-)

diff --git a/io_u.c b/io_u.c
index 9a1cd547..696d25cd 100644
--- a/io_u.c
+++ b/io_u.c
@@ -2317,10 +2317,19 @@ int do_io_u_trim(const struct thread_data *td, struct io_u *io_u)
 	struct fio_file *f = io_u->file;
 	int ret;
 
+	if (td->o.zone_mode == ZONE_MODE_ZBD) {
+		ret = zbd_do_io_u_trim(td, io_u);
+		if (ret == io_u_completed)
+			return io_u->xfer_buflen;
+		if (ret)
+			goto err;
+	}
+
 	ret = os_trim(f, io_u->offset, io_u->xfer_buflen);
 	if (!ret)
 		return io_u->xfer_buflen;
 
+err:
 	io_u->error = ret;
 	return 0;
 #endif
diff --git a/zbd.c b/zbd.c
index 859c7feb..1b933ce4 100644
--- a/zbd.c
+++ b/zbd.c
@@ -375,12 +375,24 @@ static bool zbd_verify_bs(void)
 	int i, j, k;
 
 	for_each_td(td, i) {
+		if (td_trim(td) &&
+		    (td->o.min_bs[DDIR_TRIM] != td->o.max_bs[DDIR_TRIM] ||
+		     td->o.bssplit_nr[DDIR_TRIM])) {
+			log_info("bsrange and bssplit are not allowed for trim with zonemode=zbd\n");
+			return false;
+		}
 		for_each_file(td, f, j) {
 			uint64_t zone_size;
 
 			if (!f->zbd_info)
 				continue;
 			zone_size = f->zbd_info->zone_size;
+			if (td_trim(td) && td->o.bs[DDIR_TRIM] != zone_size) {
+				log_info("%s: trim block size %llu is not the zone size %llu\n",
+					 f->file_name, td->o.bs[DDIR_TRIM],
+					 (unsigned long long)zone_size);
+				return false;
+			}
 			for (k = 0; k < FIO_ARRAY_SIZE(td->o.bs); k++) {
 				if (td->o.verify != VERIFY_NONE &&
 				    zone_size % td->o.bs[k] != 0) {
@@ -1529,9 +1541,6 @@ static void zbd_queue_io(struct thread_data *td, struct io_u *io_u, int q,
 		pthread_mutex_unlock(&zbd_info->mutex);
 		z->wp = zone_end;
 		break;
-	case DDIR_TRIM:
-		assert(z->wp == z->start);
-		break;
 	default:
 		break;
 	}
@@ -1911,8 +1920,23 @@ enum io_u_action zbd_adjust_block(struct thread_data *td, struct io_u *io_u)
 			(zbd_zone_capacity_end(zb) - io_u->offset), min_bs);
 		goto eof;
 	case DDIR_TRIM:
-		/* fall-through */
+		/* Check random trim targets a non-empty zone */
+		if (!td_random(td) || zb->wp > zb->start)
+			goto accept;
+
+		/* Find out a non-empty zone to trim */
+		zone_unlock(zb);
+		zl = get_zone(f, f->max_zone);
+		zb = zbd_find_zone(td, io_u, 1, zb, zl);
+		if (zb) {
+			io_u->offset = zb->start;
+			dprint(FD_ZBD, "%s: found new zone(%lld) for trim\n",
+			       f->file_name, io_u->offset);
+			goto accept;
+		}
+		goto eof;
 	case DDIR_SYNC:
+		/* fall-through */
 	case DDIR_DATASYNC:
 	case DDIR_SYNC_FILE_RANGE:
 	case DDIR_WAIT:
@@ -1953,3 +1977,38 @@ char *zbd_write_status(const struct thread_stat *ts)
 		return NULL;
 	return res;
 }
+
+/**
+ * zbd_do_io_u_trim - If reset zone is applicable, do reset zone instead of trim
+ *
+ * @td: FIO thread data.
+ * @io_u: FIO I/O unit.
+ *
+ * It is assumed that z->mutex is already locked.
+ * Return io_u_completed when reset zone succeeds. Return 0 when the target zone
+ * does not have write pointer. On error, return negative errno.
+ */
+int zbd_do_io_u_trim(const struct thread_data *td, struct io_u *io_u)
+{
+	struct fio_file *f = io_u->file;
+	struct fio_zone_info *z;
+	uint32_t zone_idx;
+	int ret;
+
+	zone_idx = zbd_zone_idx(f, io_u->offset);
+	z = get_zone(f, zone_idx);
+
+	if (!z->has_wp)
+		return 0;
+
+	if (io_u->offset != z->start) {
+		log_err("Trim offset not at zone start (%lld)\n", io_u->offset);
+		return -EINVAL;
+	}
+
+	ret = zbd_reset_zone((struct thread_data *)td, f, z);
+	if (ret < 0)
+		return ret;
+
+	return io_u_completed;
+}
diff --git a/zbd.h b/zbd.h
index 39dc45e3..0a73b41d 100644
--- a/zbd.h
+++ b/zbd.h
@@ -17,6 +17,7 @@ struct fio_file;
 enum io_u_action {
 	io_u_accept	= 0,
 	io_u_eof	= 1,
+	io_u_completed  = 2,
 };
 
 /**
@@ -99,6 +100,7 @@ enum fio_ddir zbd_adjust_ddir(struct thread_data *td, struct io_u *io_u,
 			      enum fio_ddir ddir);
 enum io_u_action zbd_adjust_block(struct thread_data *td, struct io_u *io_u);
 char *zbd_write_status(const struct thread_stat *ts);
+int zbd_do_io_u_trim(const struct thread_data *td, struct io_u *io_u);
 
 static inline void zbd_close_file(struct fio_file *f)
 {
-- 
2.31.1

[PATCH v2 3/5] engines/libzbc: Enable trim for libzbc I/O engine

[Shin'ichiro Kawasaki]

The trim workload to zoned block devices is supported as zone reset, and
this feature is available for I/O engines which support both zoned
devices and trim workload. Libzbc I/O engine supports zoned devices but
lacks trim workload support. To enable trim support with libzbc I/O
engine, remove the check which inhibited trim from requests to libzbc
I/O engine. Also set file open flags for trim same as write, and call
zbd_do_io_u_trim() for trim I/O.

Of note is that libzbc I/O engine now can support trim to sequential
write required zones only. The trim I/Os to conventional zones are
reported as an error.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
---
 engines/libzbc.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/engines/libzbc.c b/engines/libzbc.c
index 7f2bc431..abee2043 100644
--- a/engines/libzbc.c
+++ b/engines/libzbc.c
@@ -14,6 +14,7 @@
 #include "fio.h"
 #include "err.h"
 #include "zbd_types.h"
+#include "zbd.h"
 
 struct libzbc_data {
 	struct zbc_device	*zdev;
@@ -63,7 +64,7 @@ static int libzbc_open_dev(struct thread_data *td, struct fio_file *f,
 		return -EINVAL;
 	}
 
-	if (td_write(td)) {
+	if (td_write(td) || td_trim(td)) {
 		if (!read_only)
 			flags |= O_RDWR;
 	} else if (td_read(td)) {
@@ -71,10 +72,6 @@ static int libzbc_open_dev(struct thread_data *td, struct fio_file *f,
 			flags |= O_RDWR;
 		else
 			flags |= O_RDONLY;
-	} else if (td_trim(td)) {
-		td_verror(td, EINVAL, "libzbc does not support trim");
-		log_err("%s: libzbc does not support trim\n", f->file_name);
-		return -EINVAL;
 	}
 
 	if (td->o.oatomic) {
@@ -411,7 +408,11 @@ static enum fio_q_status libzbc_queue(struct thread_data *td, struct io_u *io_u)
 		ret = zbc_flush(ld->zdev);
 		if (ret)
 			log_err("zbc_flush error %zd\n", ret);
-	} else if (io_u->ddir != DDIR_TRIM) {
+	} else if (io_u->ddir == DDIR_TRIM) {
+		ret = zbd_do_io_u_trim(td, io_u);
+		if (!ret)
+			ret = EINVAL;
+	} else {
 		log_err("Unsupported operation %u\n", io_u->ddir);
 		ret = -EINVAL;
 	}
-- 
2.31.1

[PATCH v2 4/5] HOWTO/man: Describe trim support by zone reset for zoned devices

[Shin'ichiro Kawasaki]

Previous commits added trim support for zoned devices. Update HOWTO and
man page to describe it. Also add missing description about libzbc I/O
engine to HOWTO.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
---
 HOWTO | 9 +++++++++
 fio.1 | 4 +++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/HOWTO b/HOWTO
index d4e620de..b5d71475 100644
--- a/HOWTO
+++ b/HOWTO
@@ -992,6 +992,9 @@ Target file/device
 				single zone. The :option:`zoneskip` parameter
 				is ignored. :option:`zonerange` and
 				:option:`zonesize` must be identical.
+				Trim is handled using a zone reset operation.
+				Trim only considers non-empty sequential write
+				required and sequential write preferred zones.
 
 .. option:: zonerange=int
 
@@ -1965,6 +1968,12 @@ I/O engine
 			character devices. This engine supports trim operations.
 			The sg engine includes engine specific options.
 
+		**libzbc**
+			Synchronous I/O engine for SMR hard-disks using the libzbc
+			library. The target can be either an sg character device or
+			a block device file. This engine supports the zonemode=zbd zone
+			operations and read/write/trim I/Os.
+
 		**null**
 			Doesn't transfer any data, just pretends to.  This is mainly used to
 			exercise fio itself and for debugging/testing purposes.
diff --git a/fio.1 b/fio.1
index 9c12ad13..c0e83fef 100644
--- a/fio.1
+++ b/fio.1
@@ -766,6 +766,8 @@ starts. The \fBzonecapacity\fR parameter is ignored.
 Zoned block device mode. I/O happens sequentially in each zone, even if random
 I/O has been selected. Random I/O happens across all zones instead of being
 restricted to a single zone.
+Trim is handled using a zone reset operation. Trim only considers non-empty
+sequential write required and sequential write preferred zones.
 .RE
 .RE
 .TP
@@ -1764,7 +1766,7 @@ sg engine includes engine specific options.
 Synchronous I/O engine for SMR hard-disks using the \fBlibzbc\fR
 library. The target can be either an sg character device or
 a block device file. This engine supports the zonemode=zbd zone
-operations.
+operations and read/write/trim I/Os.
 .TP
 .B null
 Doesn't transfer any data, just pretends to. This is mainly used to
-- 
2.31.1

[PATCH v2 5/5] t/zbd: Add test #58 to test zone reset by trim workload

[Shin'ichiro Kawasaki]

To exercise zone reset by trim workload, add the test case #58. As the
precondition, it fills several zones. After that, a trim job and a write
job run in parallel for 30 seconds. The ratio of trim commands and write
commands is controlled by --flow option.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
---
 t/zbd/test-zbd-support | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/t/zbd/test-zbd-support b/t/zbd/test-zbd-support
index 57e6d05e..5103c406 100755
--- a/t/zbd/test-zbd-support
+++ b/t/zbd/test-zbd-support
@@ -1215,6 +1215,32 @@ test57() {
 		>> "${logfile}.${test_number}" 2>&1 || return $?
 }
 
+# Random writes and random trims to sequential write required zones for 30s.
+test58() {
+    local off size bs
+
+    require_seq_zones 128 || return $SKIP_TESTCASE
+
+    size=$((zone_size * 128))
+    bs="$(max $((zone_size / 128)) "$logical_block_size")"
+    prep_write
+    off=$((first_sequential_zone_sector * 512))
+    run_fio --zonemode=zbd --direct=1 --zonesize="${zone_size}" --thread=1 \
+	    --filename="${dev}" --norandommap=1 \
+            --name="precondition"  --rw=write "$(ioengine "psync")" \
+            --offset="${off}" --size=$((zone_size * 16)) --bs="${bs}" \
+	    "${job_var_opts[@]}" \
+	    --name=wjob --wait_for="precondition" --rw=randwrite \
+	    "$(ioengine "libaio")" --iodepth=8 \
+	    --offset="${off}" --size="${size}" --bs="${bs}" \
+	    --time_based --runtime=30s --flow=128 "${job_var_opts[@]}" \
+	    --name=trimjob --wait_for="precondition" --rw=randtrim \
+	    "$(ioengine "psync")" \
+	    --offset="${off}" --size="${size}" --bs="${zone_size}" \
+	    --time_based --runtime=30s --flow=1 "${job_var_opts[@]}" \
+	    >>"${logfile}.${test_number}" 2>&1
+}
+
 SECONDS=0
 tests=()
 dynamic_analyzer=()
-- 
2.31.1

Re: [PATCH v2 4/5] HOWTO/man: Describe trim support by zone reset for zoned devices

[Dmitry Fomichev]

On Thu, 2021-08-05 at 12:28 +0900, Shin'ichiro Kawasaki wrote:
> Previous commits added trim support for zoned devices. Update HOWTO and
> man page to describe it. Also add missing description about libzbc I/O
> engine to HOWTO.
> 
> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
> ---
>  HOWTO | 9 +++++++++
>  fio.1 | 4 +++-
>  2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/HOWTO b/HOWTO
> index d4e620de..b5d71475 100644
> --- a/HOWTO
> +++ b/HOWTO
> @@ -992,6 +992,9 @@ Target file/device
>                                 single zone. The :option:`zoneskip`
> parameter
>                                 is ignored. :option:`zonerange` and
>                                 :option:`zonesize` must be identical.
> +                               Trim is handled using a zone reset
> operation.
> +                               Trim only considers non-empty
> sequential write
> +                               required and sequential write preferred
> zones.
>  
>  .. option:: zonerange=int
>  
> @@ -1965,6 +1968,12 @@ I/O engine
>                         character devices. This engine supports trim
> operations.
>                         The sg engine includes engine specific options.
>  
> +               **libzbc**
> +                       Synchronous I/O engine for SMR hard-disks using
> the libzbc
> +                       library. The target can be either an sg
> character device or
> +                       a block device file. This engine supports the
> zonemode=zbd zone
> +                       operations and read/write/trim I/Os.
> +

May I suggest an even shorter description here?

Read, write, trim and ZBC/ZAC operations to a zoned block device using
libzbc library. The target can be either an SG character device or
a block device file.

>                 **null**
>                         Doesn't transfer any data, just pretends to. 
> This is mainly used to
>                         exercise fio itself and for debugging/testing
> purposes.
> diff --git a/fio.1 b/fio.1
> index 9c12ad13..c0e83fef 100644
> --- a/fio.1
> +++ b/fio.1
> @@ -766,6 +766,8 @@ starts. The \fBzonecapacity\fR parameter is
> ignored.
>  Zoned block device mode. I/O happens sequentially in each zone, even
> if random
>  I/O has been selected. Random I/O happens across all zones instead of
> being
>  restricted to a single zone.
> +Trim is handled using a zone reset operation. Trim only considers non-
> empty
> +sequential write required and sequential write preferred zones.
>  .RE
>  .RE
>  .TP
> @@ -1764,7 +1766,7 @@ sg engine includes engine specific options.
>  Synchronous I/O engine for SMR hard-disks using the \fBlibzbc\fR
>  library. The target can be either an sg character device or
>  a block device file. This engine supports the zonemode=zbd zone
> -operations.
> +operations and read/write/trim I/Os.
>  .TP
>  .B null
>  Doesn't transfer any data, just pretends to. This is mainly used to

Re: [PATCH v2 0/5] zbd: Support zone reset by trim

[Dmitry Fomichev]

On Thu, 2021-08-05 at 12:28 +0900, Shin'ichiro Kawasaki wrote:
> Trim workload is currently not supported for zonemode=zbd. This patch
> series
> enables it by resetting zones for trim I/Os. This allows fio to measure
> performance of zoned block devices using more realistic workloads which
> mixes
> write and trim.
> 
> The first patch prepares for trim support by modifying the helper
> function
> zbd_find_zone(). The second patch adds zone reset for trim. The third
> patch
> enables trim workload for libzbc I/O engine. The fourth patch adds a
> test
> case that exercises trim operation with zonemode=zbd.

The fourth patch updates the HOWTO file to describe the added
functionality. The fifth patch adds a test case that exercises trim
operation with zonemode=zbd.

> 
> Changes from v1:
> * Separated HOWTO/man changes from 2nd patch as 4th patch
> * Reflected various comments on the list
> 
> Shin'ichiro Kawasaki (5):
>   zbd: Add min_bytes argument to zbd_find_zone()
>   zbd: Support zone reset by trim
>   engines/libzbc: Enable trim for libzbc I/O engine
>   HOWTO/man: Describe trim support by zone reset for zoned devices
>   t/zbd: Add test #58 to test zone reset by trim workload
> 
>  HOWTO                  |  9 +++++
>  engines/libzbc.c       | 13 ++++---
>  fio.1                  |  4 +-
>  io_u.c                 |  9 +++++
>  t/zbd/test-zbd-support | 26 +++++++++++++
>  zbd.c                  | 85 +++++++++++++++++++++++++++++++++++-------
>  zbd.h                  |  2 +
>  7 files changed, 127 insertions(+), 21 deletions(-)
> 

This series looks good to me. The suggested wording changes in the
commit message and and in patch 4 are nits.

Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>

Re: [PATCH v2 0/5] zbd: Support zone reset by trim

[Shinichiro Kawasaki]

On Aug 05, 2021 / 19:04, Dmitry Fomichev wrote:
> On Thu, 2021-08-05 at 12:28 +0900, Shin'ichiro Kawasaki wrote:
> > Trim workload is currently not supported for zonemode=zbd. This patch
> > series
> > enables it by resetting zones for trim I/Os. This allows fio to measure
> > performance of zoned block devices using more realistic workloads which
> > mixes
> > write and trim.
> > 
> > The first patch prepares for trim support by modifying the helper
> > function
> > zbd_find_zone(). The second patch adds zone reset for trim. The third
> > patch
> > enables trim workload for libzbc I/O engine. The fourth patch adds a
> > test
> > case that exercises trim operation with zonemode=zbd.
> 
> The fourth patch updates the HOWTO file to describe the added
> functionality. The fifth patch adds a test case that exercises trim
> operation with zonemode=zbd.

Thanks, I forgot to update this part.

> 
> > 
> > Changes from v1:
> > * Separated HOWTO/man changes from 2nd patch as 4th patch
> > * Reflected various comments on the list
> > 
> > Shin'ichiro Kawasaki (5):
> >   zbd: Add min_bytes argument to zbd_find_zone()
> >   zbd: Support zone reset by trim
> >   engines/libzbc: Enable trim for libzbc I/O engine
> >   HOWTO/man: Describe trim support by zone reset for zoned devices
> >   t/zbd: Add test #58 to test zone reset by trim workload
> > 
> >  HOWTO                  |  9 +++++
> >  engines/libzbc.c       | 13 ++++---
> >  fio.1                  |  4 +-
> >  io_u.c                 |  9 +++++
> >  t/zbd/test-zbd-support | 26 +++++++++++++
> >  zbd.c                  | 85 +++++++++++++++++++++++++++++++++++-------
> >  zbd.h                  |  2 +
> >  7 files changed, 127 insertions(+), 21 deletions(-)
> > 
> 
> This series looks good to me. The suggested wording changes in the
> commit message and and in patch 4 are nits.
> 
> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>

Thank you. I will send out v3 soon, reflecting your comments on the patch 4.
Also, I'll add your Reviewed-by tags.

-- 
Best Regards,
Shin'ichiro Kawasaki