[PATCH 0/7] fstests: random fixes

[PATCH 0/7] fstests: random fixes

[Darrick J. Wong]

Hi all,

Here are numerous small fixes for regressions that I found while running
fstests on 32-bit platforms.

If you're going to start using this mess, you probably ought to just
pull from my git trees, which are linked below.

This is an extraordinary way to destroy everything.  Enjoy!
Comments and questions are, as always, welcome.

--D

xfsprogs git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfsprogs-dev.git/log/?h=random-fixes

fstests git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfstests-dev.git/log/?h=random-fixes

[PATCH 1/7] xfs/449: filter out "Discarding..." from output

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

xfsprogs 5.4 prints "Discarding..." if the disk supports the trim
command.  Filter this out of the output because xfs_info and friends
won't print that out.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/xfs/449 |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)


diff --git a/tests/xfs/449 b/tests/xfs/449
index 7aae1545..83c3c493 100755
--- a/tests/xfs/449
+++ b/tests/xfs/449
@@ -39,7 +39,7 @@ _require_scratch_nocheck
 _require_xfs_spaceman_command "info"
 _require_command "$XFS_GROWFS_PROG" xfs_growfs
 
-_scratch_mkfs > $tmp.mkfs
+_scratch_mkfs | sed -e '/Discarding/d' > $tmp.mkfs
 echo MKFS >> $seqres.full
 cat $tmp.mkfs >> $seqres.full
 

[PATCH 2/7] xfs/122: add disk dquot structure to the list

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

Add disk dquot structures to the check list now that we killed the
typedef.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/xfs/122.out |    1 +
 1 file changed, 1 insertion(+)


diff --git a/tests/xfs/122.out b/tests/xfs/122.out
index d2d5a184..91a3bdae 100644
--- a/tests/xfs/122.out
+++ b/tests/xfs/122.out
@@ -81,6 +81,7 @@ sizeof(struct xfs_dir3_free) = 64
 sizeof(struct xfs_dir3_free_hdr) = 64
 sizeof(struct xfs_dir3_leaf) = 64
 sizeof(struct xfs_dir3_leaf_hdr) = 64
+sizeof(struct xfs_disk_dquot) = 104
 sizeof(struct xfs_dsymlink_hdr) = 56
 sizeof(struct xfs_extent_data) = 24
 sizeof(struct xfs_extent_data_info) = 32

[PATCH 3/7] xfs/507: skip if we can't create a large sparse file for testing

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

Skip this test we can't create the large sparse file needed to test
overflows.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/xfs/507 |    1 +
 1 file changed, 1 insertion(+)


diff --git a/tests/xfs/507 b/tests/xfs/507
index 0bb697f9..fac5d243 100755
--- a/tests/xfs/507
+++ b/tests/xfs/507
@@ -68,6 +68,7 @@ _require_fs_space $SCRATCH_MNT 1234567
 loop_file=$SCRATCH_MNT/a.img
 loop_mount=$SCRATCH_MNT/a
 $XFS_IO_PROG -f -c "truncate $loop_file_sz" $loop_file
+test -s $loop_file || _notrun "Could not create large sparse file"
 loop_dev=$(_create_loop_device $loop_file)
 
 # Now we have to create the source file.  The goal is to overflow a 32-bit

[PATCH 4/7] xfs/279: skip test if we can't allocate scsi_debug device

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

Due to the unique structure of xfs/279 running _get_scsi_debug_dev from
a backtick from inside subshell, the "could not get scsi_debug device"
checks do not actually stop the test when modprobe scsi_debug fails.

Therefore, check the value of SCSI_DEBUG_DEV from the subshell and
_notrun the test if we couldn't get memory.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/xfs/279 |    3 +++
 1 file changed, 3 insertions(+)


diff --git a/tests/xfs/279 b/tests/xfs/279
index 7ab8bdd5..0ddc6a00 100755
--- a/tests/xfs/279
+++ b/tests/xfs/279
@@ -65,6 +65,7 @@ _check_mkfs()
 echo "==================="
 echo "4k physical 512b logical aligned"
 SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
+test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # sector size should default to 4k
 _check_mkfs $SCSI_DEBUG_DEV
 # blocksize smaller than physical sectorsize should revert to logical sectorsize
@@ -77,6 +78,7 @@ _put_scsi_debug_dev
 echo "==================="
 echo "4k physical 512b logical unaligned"
 SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128`
+test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # should fail on misalignment
 _check_mkfs $SCSI_DEBUG_DEV
 # should fall back to logical sector size with force
@@ -93,6 +95,7 @@ _put_scsi_debug_dev
 echo "==================="
 echo "hard 4k physical / 4k logical"
 SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128`
+test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # block size smaller than sector size should fail 
 _check_mkfs -b size=2048 $SCSI_DEBUG_DEV
 # sector size smaller than physical sector size should fail

[PATCH 5/7] rc: fix _get_max_lfs_filesize on 32-bit platforms

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

The 32-bit calculation of the maximum filesize is incorrect.  Replace it
with the formula that the kernel has used since commit 0cc3b0ec23ce
("Clarify (and fix) MAX_LFS_FILESIZE macros").  This fixes a regression
in generic/351 on 32-bit kernels.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 common/rc |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)


diff --git a/common/rc b/common/rc
index eeac1355..cf6bc9d5 100644
--- a/common/rc
+++ b/common/rc
@@ -3999,7 +3999,9 @@ _get_max_lfs_filesize()
 {
 	case "$(getconf LONG_BIT)" in
 	"32")
-		echo $(( ($(getconf PAGE_SIZE) << ($(getconf LONG_BIT) - 1) ) - 1))
+		local ulong_max=$(getconf ULONG_MAX)
+		local page_size=$(getconf PAGE_SIZE)
+		echo $(( ulong_max * page_size ))
 		;;
 	"64")
 		echo 9223372036854775807

[PATCH 6/7] generic/108: skip test if we can't initialize scsi_debug

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

Correct the logic in this test that detects failed scsi_debug
initializations.  Downgrade the reaction to _notrun since the filesystem
under test did not fail, just our mockup disk.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/generic/108 |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)


diff --git a/tests/generic/108 b/tests/generic/108
index 9b4fe60f..ab6101f2 100755
--- a/tests/generic/108
+++ b/tests/generic/108
@@ -49,9 +49,7 @@ rm -f $seqres.full
 
 # _get_scsi_debug_dev returns a scsi debug device with 128M in size by default
 SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 300`
-if [ "$SCSI_DEBUG_DEV" == "/dev/" ]; then
-	_fail "Failed to initialize scsi debug device"
-fi
+test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device"
 echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full
 
 # create striped volume with 4MB stripe size

[PATCH 7/7] xfs/020: call _notrun if we can't create a 60t sparse image

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

If we can't create the 60T sparse image for testing repair on a large fs
(such as when running on 32-bit), don't bother running the rest of the
test.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/xfs/020 |    2 ++
 1 file changed, 2 insertions(+)


diff --git a/tests/xfs/020 b/tests/xfs/020
index 61da4101..e39c3482 100755
--- a/tests/xfs/020
+++ b/tests/xfs/020
@@ -42,6 +42,8 @@ echo "Silence is golden"
 
 fsfile=$TEST_DIR/fsfile.$seq
 rm -f $fsfile
+truncate -s 60t $fsfile || _notrun "Cannot create 60T sparse file for test."
+rm -f $fsfile
 
 $MKFS_PROG -t xfs -d size=60t,file,name=$fsfile >/dev/null
 $XFS_REPAIR_PROG -f -o ag_stride=32 -t 1 $fsfile >/dev/null 2>&1

Re: [PATCH 1/7] xfs/449: filter out "Discarding..." from output

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:10:41PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> xfsprogs 5.4 prints "Discarding..." if the disk supports the trim
> command.  Filter this out of the output because xfs_info and friends
> won't print that out.

We really should drop that message as it is breaking way too many
things and isn't actually useful.

Re: [PATCH 2/7] xfs/122: add disk dquot structure to the list

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:10:48PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Add disk dquot structures to the check list now that we killed the
> typedef.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 3/7] xfs/507: skip if we can't create a large sparse file for testing

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:10:54PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Skip this test we can't create the large sparse file needed to test
> overflows.

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 4/7] xfs/279: skip test if we can't allocate scsi_debug device

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:11:00PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Due to the unique structure of xfs/279 running _get_scsi_debug_dev from
> a backtick from inside subshell, the "could not get scsi_debug device"
> checks do not actually stop the test when modprobe scsi_debug fails.
> 
> Therefore, check the value of SCSI_DEBUG_DEV from the subshell and
> _notrun the test if we couldn't get memory.

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 5/7] rc: fix _get_max_lfs_filesize on 32-bit platforms

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:11:07PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> The 32-bit calculation of the maximum filesize is incorrect.  Replace it
> with the formula that the kernel has used since commit 0cc3b0ec23ce
> ("Clarify (and fix) MAX_LFS_FILESIZE macros").  This fixes a regression
> in generic/351 on 32-bit kernels.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 6/7] generic/108: skip test if we can't initialize scsi_debug

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:11:13PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Correct the logic in this test that detects failed scsi_debug
> initializations.  Downgrade the reaction to _notrun since the filesystem
> under test did not fail, just our mockup disk.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 7/7] xfs/020: call _notrun if we can't create a 60t sparse image

[Christoph Hellwig]

On Wed, Jan 15, 2020 at 09:11:19PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> If we can't create the 60T sparse image for testing repair on a large fs
> (such as when running on 32-bit), don't bother running the rest of the
> test.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 7/7] xfs/020: call _notrun if we can't create a 60t sparse image

[Darrick J. Wong]

On Wed, Jan 15, 2020 at 09:11:19PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> If we can't create the 60T sparse image for testing repair on a large fs
> (such as when running on 32-bit), don't bother running the rest of the
> test.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
>  tests/xfs/020 |    2 ++
>  1 file changed, 2 insertions(+)
> 
> 
> diff --git a/tests/xfs/020 b/tests/xfs/020
> index 61da4101..e39c3482 100755
> --- a/tests/xfs/020
> +++ b/tests/xfs/020
> @@ -42,6 +42,8 @@ echo "Silence is golden"
>  
>  fsfile=$TEST_DIR/fsfile.$seq
>  rm -f $fsfile
> +truncate -s 60t $fsfile || _notrun "Cannot create 60T sparse file for test."

Um, this got committed with "xfs_io -x -c 'truncate 60t' and not as
written, which means that this test does not work on i386 because xfs_io
doesn't return nonzero when the truncate syscall fails.  Will send
patch.

--D

> +rm -f $fsfile
>  
>  $MKFS_PROG -t xfs -d size=60t,file,name=$fsfile >/dev/null
>  $XFS_REPAIR_PROG -f -o ag_stride=32 -t 1 $fsfile >/dev/null 2>&1
>