From: Eryu Guan <guaneryu@gmail.com>
To: Max Reitz <mreitz@redhat.com>
Cc: fstests@vger.kernel.org
Subject: Re: [PATCH v2] generic: fallocate two bytes at block boundary
Date: Fri, 27 Sep 2019 09:37:46 +0800 [thread overview]
Message-ID: <20190927013744.GY2622@desktop> (raw)
In-Reply-To: <20190926165145.9161-1-mreitz@redhat.com>
On Thu, Sep 26, 2019 at 06:51:45PM +0200, Max Reitz wrote:
> Allocating two bytes at a block boundary with fallocate should allocate
> both blocks involved. Test this by writing data to both bytes
> afterwards and see whether the on-disk size increases (it should not).
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
I notice that XFS fails this test with v5.3 kernel, so I guess this is a
targeted regression test? Do you have a (pending) patch/commit that
could be referenced in the commit log and/or test description? So we
could know which patch/commit fixed this particular failure.
> ---
> v2:
> - Use _get_file_block_size instead of manual stat -fc '%S'
> - Use xfs_io instead of fallocate/dd
> (and require falloc support)
> - Add the ' B' that was missing as allocated_size_after's unit in the
> error message
> ---
> tests/generic/568 | 63 +++++++++++++++++++++++++++++++++++++++++++
> tests/generic/568.out | 4 +++
> tests/generic/group | 1 +
> 3 files changed, 68 insertions(+)
> create mode 100755 tests/generic/568
> create mode 100644 tests/generic/568.out
>
> diff --git a/tests/generic/568 b/tests/generic/568
> new file mode 100755
> index 00000000..df67daf4
> --- /dev/null
> +++ b/tests/generic/568
> @@ -0,0 +1,63 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test No. generic/568
> +#
> +# Test that fallocating an unaligned range allocates all blocks
> +# touched by that range
> +#
> +seq=$(basename $0)
> +seqres="$RESULT_DIR/$seq"
> +echo "QA output created by $seq"
> +
> +here=$PWD
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f "$tmp".*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch
> +_require_xfs_io_command "falloc"
> +
> +testfile="$SCRATCH_MNT/testfile"
> +
> +_scratch_mkfs > /dev/null 2>&1
> +_scratch_mount
Seems you don't need $SCRATCH_DEV at all. Just create the test file on
$TEST_DEV in $TEST_DIR, e.g.
testfile="$TEST_DIR"/falloctest-$seq
rm -f $testfile
> +
> +# Fallocate 2 bytes across a block boundary
> +block_size=$(_get_file_block_size "$SCRATCH_MNT")
> +$XFS_IO_PROG -f -c "falloc $((block_size - 1)) 2" "$testfile"
> +
> +# Both the first blocks should be allocated now. Check that by
> +# inquiring whether the file grows when we write to the two bytes we
> +# have just fallocated.
> +
> +allocated_size_before=$(($(stat -c '%b * %B' "$testfile")))
> +
> +$XFS_IO_PROG -c "pwrite $((block_size - 1)) 2" "$testfile" \
> + | _filter_xfs_io | sed -e "s/$((block_size - 1))/block_size - 1/"
> +
> +allocated_size_after=$(($(stat -c '%b * %B' "$testfile")))
> +
> +if [ $allocated_size_after -gt $allocated_size_before ]; then
> + echo "ERROR: File grew from ${allocated_size_before} B to" \
> + "${allocated_size_after} B when writing to the fallocated range."
> +else
> + echo "OK: File did not grow."
> +fi
> +
> +status=0
> +exit
> diff --git a/tests/generic/568.out b/tests/generic/568.out
> new file mode 100644
> index 00000000..435a9630
> --- /dev/null
> +++ b/tests/generic/568.out
> @@ -0,0 +1,4 @@
> +QA output created by 568
> +wrote 2/2 bytes at offset block_size - 1
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +OK: File did not grow.
> diff --git a/tests/generic/group b/tests/generic/group
> index 7cf4f6c4..24ab29bc 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -570,3 +570,4 @@
> 565 auto quick copy_range
> 566 auto quick quota metadata
> 567 auto quick rw punch
> +568 auto quick rw
Add 'prealloc' group as well.
Thanks for the test!
Eryu
> --
> 2.21.0
>
next prev parent reply other threads:[~2019-09-27 1:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 16:51 [PATCH v2] generic: fallocate two bytes at block boundary Max Reitz
2019-09-27 1:37 ` Eryu Guan [this message]
2019-09-27 9:16 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190927013744.GY2622@desktop \
--to=guaneryu@gmail.com \
--cc=fstests@vger.kernel.org \
--cc=mreitz@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).