fstests.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] generic/402: fix for updated behavior of timestamp limits
@ 2019-07-19  4:12 Deepa Dinamani
  2019-07-21 16:47 ` Eryu Guan
                   ` (2 more replies)
  0 siblings, 3 replies; 33+ messages in thread
From: Deepa Dinamani @ 2019-07-19  4:12 UTC (permalink / raw)
  To: fstests; +Cc: arnd, y2038

The mount behavior will not be altered because of the unsupported
timestamps on the filesystems.

Adjust the test accordingly.

An updated series to be posted after the merge window is hosted at
<https://github.com/deepa-hub/vfs/tree/limits>

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
---
 common/rc             | 36 +++++++++---------
 tests/generic/402     | 87 ++++++++++++++++---------------------------
 tests/generic/402.out |  2 +-
 3 files changed, 53 insertions(+), 72 deletions(-)

diff --git a/common/rc b/common/rc
index 25203bb4..39a2deb0 100644
--- a/common/rc
+++ b/common/rc
@@ -1959,16 +1959,9 @@ _run_aiodio()
     return $status
 }
 
-# this test requires y2038 sysfs switch and filesystem
-# timestamp ranges support.
-_require_y2038()
+_require_timestamp_range()
 {
 	local device=${1:-$TEST_DEV}
-	local sysfsdir=/proc/sys/fs/fs-timestamp-check-on
-
-	if [ ! -e $sysfsdir ]; then
-		_notrun "no kernel support for y2038 sysfs switch"
-	fi
 
 	local tsmin tsmax
 	read tsmin tsmax <<<$(_filesystem_timestamp_range $device)
@@ -1980,23 +1973,32 @@ _require_y2038()
 _filesystem_timestamp_range()
 {
 	local device=${1:-$TEST_DEV}
+	u32max=$(((1<<32)-1))
+	s32min=-$((1<<31))
+	s32max=$(((1<<31)-1))
+	s64max=$(((1<<63)-1))
+	s64min=$((1<<63))
+
 	case $FSTYP in
-	ext4)
+	ext2)
+		echo "$s32min $s32max"
+		;;
+	ext3|ext4)
 		if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then
-			echo "-2147483648 15032385535"
+			printf "%d %d\n" $s32min 0x37fffffff
 		else
-			echo "-2147483648 2147483647"
+			echo "$s32min $s32max"
 		fi
 		;;
 
-	xfs)
-		echo "-2147483648 2147483647"
-		;;
 	jfs)
-		echo "0 4294967295"
+		echo "0 $u32max"
 		;;
-	f2fs)
-		echo "-2147483648 2147483647"
+	xfs)
+		echo "$s32min $s32max"
+		;;
+	btrfs)
+		echo "$s64min $s64max"
 		;;
 	*)
 		echo "-1 -1"
diff --git a/tests/generic/402 b/tests/generic/402
index f742fedd..dd136ec2 100755
--- a/tests/generic/402
+++ b/tests/generic/402
@@ -4,15 +4,10 @@
 #
 # FS QA Test 402
 #
-# Tests to verify policy for filesystem timestamps for
-# supported ranges:
-# 1. Verify filesystem rw mount according to sysctl
-# timestamp_supported.
-# 2. Verify timestamp clamping for timestamps beyond max
-# timestamp supported.
+# Test to verify filesystem timestamps for supported ranges.
 #
-# Exit status 1: either or both tests above fail.
-# Exit status 0: both the above tests pass.
+# Exit status 1: test failed.
+# Exit status 0: test passed.
 #
 seq=`basename $0`
 seqres=$RESULT_DIR/$seq
@@ -49,47 +44,59 @@ check_stat()
 	prev_timestamp="$timestamp;$timestamp"
 	if [ $prev_timestamp != $stat_timestamp ]; then
 		echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full
+		return 1
 	fi
+	return 0
 }
 
 run_test_individual()
 {
+	fail=0
 	file=$1
 	timestamp=$2
 	update_time=$3
 
 	# check if the time needs update
 	if [ $update_time -eq 1 ]; then
-		echo "Updating file: $file to timestamp `date -d @$timestamp`"  >> $seqres.full
+		echo "Updating file: $file to timestamp $timestamp"  >> $seqres.full
 		$XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file
 		if [ $? -ne 0 ]; then
 			echo "Failed to update times on $file" | tee -a $seqres.full
+			fail=1
 		fi
 	fi
 
-	tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp))
-	echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`"  >> $seqres.full
-	check_stat $file $tsclamp
+	tsclamp=$((timestamp<tsmin?tsmin:timestamp>tsmax?tsmax:timestamp))
+	echo "Checking file: $file Updated timestamp is $tsclamp"  >> $seqres.full
+	if ! check_stat $file $tsclamp; then
+		fail=1
+	fi
+	return $fail
 }
 
 run_test()
 {
+	fail=0
 	update_time=$1
 
 	n=1
 
 	for TIME in "${TIMESTAMPS[@]}"; do
-		run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time
+		if ! run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time; then
+			fail=1
+		fi
 		((n++))
 	done
+
+	return $fail
 }
 
 _scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed"
-_require_y2038 $SCRATCH_DEV
+_require_timestamp_range $SCRATCH_DEV
 
 read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV)
-echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full
-echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full
+echo min supported timestamp $tsmin >> $seqres.full
+echo max supported timestamp $tsmax >> $seqres.full
 
 # Test timestamps array
 
@@ -97,45 +104,14 @@ declare -a TIMESTAMPS=(
 	$tsmin
 	0
 	$tsmax
+	$((tsmax/2))
 	$((tsmax+1))
-	4294967295
-	8589934591
-	34359738367
 )
 
-# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038
-sys_tsmax=2147483647
-echo "max timestamp that needs to be supported by fs for rw mount is" \
-	"$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full
-
-read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on)
-
 _scratch_mount
 result=$?
 
-if [ $ts_check -ne 0 ]; then
-	echo "sysctl filesystem timestamp check is on" >> $seqres.full
-	# check for mount failure if the minimum requirement for max timestamp
-	# supported is not met.
-	if [ $sys_tsmax -ge $tsmax ]; then
-		if [ $result -eq 0 ]; then
-			echo "mount test failed"  | tee -a $seqres.full
-			exit
-		fi
-	else
-		if [ $result -ne 0 ]; then
-			echo "failed to mount $SCRATCH_DEV"  | tee -a $seqres.full
-			exit
-		fi
-	fi
-else
-	# if sysctl switch is off then mount should succeed always.
-	echo "sysctl filesystem timestamp check is off" >> $seqres.full
-	if [ $result -ne 0 ]; then
-		echo "failed to mount $SCRATCH_DEV and timestamp check is off"  >> $seqres.full
-		exit
-	fi
-fi
+status=0
 
 # Begin test case 1
 echo "In memory timestamps update test start" >> $seqres.full
@@ -143,7 +119,9 @@ echo "In memory timestamps update test start" >> $seqres.full
 # update time on the file
 update_time=1
 
-run_test $update_time
+if ! run_test $update_time; then
+	status=1
+fi
 
 echo "In memory timestamps update complete" >> $seqres.full
 
@@ -162,12 +140,13 @@ update_time=0
 echo "On disk timestamps update test start" >> $seqres.full
 
 # Re-run test
-run_test $update_time
+if ! run_test $update_time; then
+	status=1
+fi
 
 echo "On disk timestamps update test complete" >> $seqres.full
 
-echo "y2038 inode timestamp tests completed successfully"
+echo "inode timestamp tests completed status $status"
 
 # success, all done
-status=0
-exit
+exit $status
diff --git a/tests/generic/402.out b/tests/generic/402.out
index 6c5b9308..4500e6c7 100644
--- a/tests/generic/402.out
+++ b/tests/generic/402.out
@@ -1,2 +1,2 @@
 QA output created by 402
-y2038 inode timestamp tests completed successfully
+inode timestamp tests completed status 0
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 33+ messages in thread

end of thread, other threads:[~2020-02-01  9:14 UTC | newest]

Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-19  4:12 [PATCH] generic/402: fix for updated behavior of timestamp limits Deepa Dinamani
2019-07-21 16:47 ` Eryu Guan
2019-10-02 22:06   ` Deepa Dinamani
2019-10-05 18:35 ` Eryu Guan
2019-10-23 22:17   ` Deepa Dinamani
2019-12-12 13:11 ` Amir Goldstein
2019-12-12 21:55   ` Deepa Dinamani
2019-12-18 20:21     ` Deepa Dinamani
2019-12-18 20:46       ` Amir Goldstein
2019-12-19  8:28         ` [Y2038] " Arnd Bergmann
2019-12-19  8:40           ` Greg KH
2019-12-19 11:29             ` Arnd Bergmann
2019-12-19 11:35               ` Greg KH
2019-12-19 15:48               ` Ben Hutchings
2019-12-19 20:35                 ` Arnd Bergmann
2019-12-19 12:09           ` Amir Goldstein
2019-12-20 22:45             ` Deepa Dinamani
2019-12-23  5:16               ` [PATCH] generic/402: Make timestamp range check conditional Deepa Dinamani
2019-12-23  6:36                 ` Amir Goldstein
2019-12-24  1:15                   ` Deepa Dinamani
2019-12-28 22:13                     ` [PATCH v2] " Deepa Dinamani
2019-12-30  7:34                       ` Amir Goldstein
2020-01-03  6:46                         ` Deepa Dinamani
2020-01-03  9:58                           ` Amir Goldstein
2020-01-08  8:09                         ` Eryu Guan
2020-01-08  8:45                           ` Amir Goldstein
2020-01-08  9:50                             ` Eryu Guan
2020-01-17  9:09                               ` Amir Goldstein
2020-01-17 18:23                                 ` Deepa Dinamani
2020-01-17 19:01                                   ` Deepa Dinamani
2020-01-19  0:57                                     ` [PATCH v3 1/1] " Deepa Dinamani
2020-01-19  9:19                                       ` Amir Goldstein
2020-02-01  9:14                                         ` Eryu Guan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).