From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Donald Douwsma <ddouwsma@redhat.com>
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH] xfstests: add test for xfs_repair progress reporting
Date: Tue, 19 May 2020 09:01:25 -0700 [thread overview]
Message-ID: <20200519160125.GB17621@magnolia> (raw)
In-Reply-To: <20200519065512.232760-1-ddouwsma@redhat.com>
On Tue, May 19, 2020 at 04:55:12PM +1000, Donald Douwsma wrote:
> xfs_repair's interval based progress has been broken for
> some time, create a test based on dmdelay to stretch out
> the time and use ag_stride to force parallelism.
>
> Signed-off-by: Donald Douwsma <ddouwsma@redhat.com>
> ---
> tests/xfs/516 | 72 +++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/516.out | 15 ++++++++++
> tests/xfs/group | 1 +
> 3 files changed, 88 insertions(+)
> create mode 100755 tests/xfs/516
> create mode 100644 tests/xfs/516.out
>
> diff --git a/tests/xfs/516 b/tests/xfs/516
> new file mode 100755
> index 00000000..5ad57fbc
> --- /dev/null
> +++ b/tests/xfs/516
> @@ -0,0 +1,72 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test 516
> +#
> +# Test xfs_repair's progress reporting
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + _dmsetup_remove delay-test > /dev/null 2>&1
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dmdelay
> +. ./common/populate
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +_require_dm_target delay
> +
> +# Filter output specific to the formatters in xfs_repair/progress.c
> +# Ideally we'd like to see hits on anything that matches
> +# awk '/{FMT/' repair/progress.c
> +_filter_repair()
> +{
> + sed -ne '
> + s/[0-9]\+/#/g;
> + /#:#:#:/p
> + '
> +}
> +
> +echo "Format and populate"
> +_scratch_populate_cached nofill > $seqres.full 2>&1
> +
> +echo "Introduce a dmdelay"
> +_init_delay
> +
> +# Introduce a read I/O delay
> +# The default in common/dmdelay is a bit too agressive
> +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0"
> +_load_delay_table $DELAY_READ
> +
> +echo "Run repair"
> +$XFS_REPAIR_PROG -o ag_stride=4 -t 1 $DELAY_DEV >> $seqres.full 2>&1
Hmm... if the scratch device had an external log device, this raw
invocation of repair won't run because it won't have the log parameter.
Normally I'd say just use _scratch_xfs_repair here, but since there's a
delay device involved, things get trickier...
...or maybe they don't?
SCRATCH_DEV=$DELAY_DEV _scratch_xfs_repair -o ag_stride...
might work, seeing as we do that in a few places...
> +cat $seqres.full | _filter_repair | sort -u
You also might want to redirect the repair output to a separate file so
that you can filter and sort /only/ the repair output in the process of
logging the repair results to stdout and $seqres.full.
--D
> +
> +_cleanup_delay
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/516.out b/tests/xfs/516.out
> new file mode 100644
> index 00000000..bc824d7f
> --- /dev/null
> +++ b/tests/xfs/516.out
> @@ -0,0 +1,15 @@
> +QA output created by 516
> +Format and populate
> +Introduce a dmdelay
> +Run repair
> + - #:#:#: Phase #: #% done - estimated remaining time # minutes, # seconds
> + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute
> + - #:#:#: Phase #: elapsed time # seconds - processed # inodes per minute
> + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done
> + - #:#:#: process known inodes and inode discovery - # of # inodes done
> + - #:#:#: process newly discovered inodes - # of # allocation groups done
> + - #:#:#: rebuild AG headers and trees - # of # allocation groups done
> + - #:#:#: scanning agi unlinked lists - # of # allocation groups done
> + - #:#:#: scanning filesystem freespace - # of # allocation groups done
> + - #:#:#: setting up duplicate extent list - # of # allocation groups done
> + - #:#:#: verify and correct link counts - # of # allocation groups done
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 12eb55c9..aeeca23f 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -513,3 +513,4 @@
> 513 auto mount
> 514 auto quick db
> 515 auto quick quota
> +516 repair
> --
> 2.18.4
>
next prev parent reply other threads:[~2020-05-19 16:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 6:55 [PATCH] xfstests: add test for xfs_repair progress reporting Donald Douwsma
2020-05-19 16:01 ` Darrick J. Wong [this message]
2020-05-20 1:11 ` Donald Douwsma
2020-05-20 3:52 ` [PATCH v2] " Donald Douwsma
2020-05-20 15:55 ` Darrick J. Wong
2020-05-24 16:46 ` Eryu Guan
2020-05-24 17:18 ` Darrick J. Wong
2020-08-17 7:49 ` Donald Douwsma
2020-08-17 7:53 ` [PATCH v3] " Donald Douwsma
2020-08-30 15:57 ` Eryu Guan
2020-09-02 9:04 ` Donald Douwsma
2020-05-29 8:06 ` [PATCH v2] " Zorro Lang
2020-06-01 0:53 ` Donald Douwsma
2020-06-01 3:55 ` Donald Douwsma
2020-06-11 5:03 ` Zorro Lang
2020-08-17 6:25 ` Donald Douwsma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200519160125.GB17621@magnolia \
--to=darrick.wong@oracle.com \
--cc=ddouwsma@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).