From: Allison Henderson <allison.henderson@oracle.com>
To: "Darrick J. Wong" <djwong@kernel.org>, guaneryu@gmail.com
Cc: Amir Goldstein <amir73il@gmail.com>,
linux-xfs@vger.kernel.org, fstests@vger.kernel.org, guan@eryu.me
Subject: Re: [PATCH 1/4] generic: check userspace handling of extreme timestamps
Date: Thu, 22 Apr 2021 14:16:28 -0700 [thread overview]
Message-ID: <6b503579-cc85-7c5a-bd67-95352401d39a@oracle.com> (raw)
In-Reply-To: <161896458765.776452.776474866675909773.stgit@magnolia>
On 4/20/21 5:23 PM, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> These two tests ensure we can store and retrieve timestamps on the
> extremes of the date ranges supported by userspace, and the common
> places where overflows can happen.
>
> They differ from generic/402 in that they don't constrain the dates
> tested to the range that the filesystem claims to support; we attempt
> various things that /userspace/ can parse, and then check that the vfs
> clamps and persists the values correctly.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Looks ok to me. The tests have quite a bit of overlap, but they're
pretty small too. I think if we add on any more, probably we should
think about a common/bigtime file? But for now, I think it's fine.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
> ---
> tests/generic/721 | 123 ++++++++++++++++++++++++++++++++++++++++++++++++
> tests/generic/721.out | 2 +
> tests/generic/722 | 125 +++++++++++++++++++++++++++++++++++++++++++++++++
> tests/generic/722.out | 1
> tests/generic/group | 6 ++
> 5 files changed, 255 insertions(+), 2 deletions(-)
> create mode 100755 tests/generic/721
> create mode 100644 tests/generic/721.out
> create mode 100755 tests/generic/722
> create mode 100644 tests/generic/722.out
>
>
> diff --git a/tests/generic/721 b/tests/generic/721
> new file mode 100755
> index 00000000..9198b6b4
> --- /dev/null
> +++ b/tests/generic/721
> @@ -0,0 +1,123 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle. All Rights Reserved.
> +#
> +# FS QA Test No. 721
> +#
> +# Make sure we can store and retrieve timestamps on the extremes of the
> +# date ranges supported by userspace, and the common places where overflows
> +# can happen.
> +#
> +# This differs from generic/402 in that we don't constrain ourselves to the
> +# range that the filesystem claims to support; we attempt various things that
> +# /userspace/ can parse, and then check that the vfs clamps and persists the
> +# values correctly.
> +#
> +# NOTE: Old kernels (pre 5.4) allow filesystems to truncate timestamps silently
> +# when writing timestamps to disk! This test detects this silent truncation
> +# and fails. If you see a failure on such a kernel, contact your distributor
> +# for an update.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +
> +# real QA test starts here
> +_supported_fs generic
> +_require_scratch
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs > $seqres.full
> +_scratch_mount
> +
> +# Does our userspace even support large dates?
> +test_bigdates=1
> +touch -d 'May 30 01:53:03 UTC 2514' $SCRATCH_MNT 2>/dev/null || test_bigdates=0
> +
> +# And can we do statx?
> +test_statx=1
> +($XFS_IO_PROG -c 'help statx' | grep -q 'Print raw statx' && \
> + $XFS_IO_PROG -c 'statx -r' $SCRATCH_MNT 2>/dev/null | grep -q 'stat.mtime') || \
> + test_statx=0
> +
> +echo "Userspace support of large timestamps: $test_bigdates" >> $seqres.full
> +echo "xfs_io support of statx: $test_statx" >> $seqres.full
> +
> +touchme() {
> + local arg="$1"
> + local name="$2"
> +
> + echo "$arg" > $SCRATCH_MNT/t_$name
> + touch -d "$arg" $SCRATCH_MNT/t_$name
> +}
> +
> +report() {
> + local files=($SCRATCH_MNT/t_*)
> + for file in "${files[@]}"; do
> + echo "${file}: $(cat "${file}")"
> + TZ=UTC stat -c '%y %Y %n' "${file}"
> + test $test_statx -gt 0 && \
> + $XFS_IO_PROG -c 'statx -r' "${file}" | grep 'stat.mtime'
> + done
> +}
> +
> +# -2147483648 (S32_MIN, or classic unix min)
> +touchme 'Dec 13 20:45:52 UTC 1901' s32_min
> +
> +# 2147483647 (S32_MAX, or classic unix max)
> +touchme 'Jan 19 03:14:07 UTC 2038' s32_max
> +
> +# 7956915742, all twos
> +touchme 'Feb 22 22:22:22 UTC 2222' all_twos
> +
> +if [ $test_bigdates -gt 0 ]; then
> + # 16299260424 (u64 nsec counter from s32_min, like xfs does)
> + touchme 'Tue Jul 2 20:20:24 UTC 2486' u64ns_from_s32_min
> +
> + # 15032385535 (u34 time if you start from s32_min, like ext4 does)
> + touchme 'May 10 22:38:55 UTC 2446' u34_from_s32_min
> +
> + # 17179869183 (u34 time if you start from the unix epoch)
> + touchme 'May 30 01:53:03 UTC 2514' u34_max
> +
> + # Latest date we can synthesize(?)
> + touchme 'Dec 31 23:59:59 UTC 2147483647' abs_max_time
> +
> + # Earliest date we can synthesize(?)
> + touchme 'Jan 1 00:00:00 UTC 0' abs_min_time
> +fi
> +
> +# Query timestamps from incore
> +echo before >> $seqres.full
> +report > $tmp.before_remount
> +cat $tmp.before_remount >> $seqres.full
> +
> +_scratch_cycle_mount
> +
> +# Query timestamps from disk
> +echo after >> $seqres.full
> +report > $tmp.after_remount
> +cat $tmp.after_remount >> $seqres.full
> +
> +# Did they match?
> +cmp -s $tmp.before_remount $tmp.after_remount
> +
> +# success, all done
> +echo Silence is golden.
> +status=0
> +exit
> diff --git a/tests/generic/721.out b/tests/generic/721.out
> new file mode 100644
> index 00000000..b2bc6d58
> --- /dev/null
> +++ b/tests/generic/721.out
> @@ -0,0 +1,2 @@
> +QA output created by 721
> +Silence is golden.
> diff --git a/tests/generic/722 b/tests/generic/722
> new file mode 100755
> index 00000000..305c3bd6
> --- /dev/null
> +++ b/tests/generic/722
> @@ -0,0 +1,125 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle. All Rights Reserved.
> +#
> +# FS QA Test No. 722
> +#
> +# Make sure we can store and retrieve timestamps on the extremes of the
> +# date ranges supported by userspace, and the common places where overflows
> +# can happen. This test also ensures that the timestamps are persisted
> +# correctly after a shutdown.
> +#
> +# This differs from generic/402 in that we don't constrain ourselves to the
> +# range that the filesystem claims to support; we attempt various things that
> +# /userspace/ can parse, and then check that the vfs clamps and persists the
> +# values correctly.
> +#
> +# NOTE: Old kernels (pre 5.4) allow filesystems to truncate timestamps silently
> +# when writing timestamps to disk! This test detects this silent truncation
> +# and fails. If you see a failure on such a kernel, contact your distributor
> +# for an update.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +
> +# real QA test starts here
> +_supported_fs generic
> +_require_scratch
> +_require_scratch_shutdown
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs > $seqres.full
> +_scratch_mount
> +
> +# Does our userspace even support large dates?
> +test_bigdates=1
> +touch -d 'May 30 01:53:03 UTC 2514' $SCRATCH_MNT 2>/dev/null || test_bigdates=0
> +
> +# And can we do statx?
> +test_statx=1
> +($XFS_IO_PROG -c 'help statx' | grep -q 'Print raw statx' && \
> + $XFS_IO_PROG -c 'statx -r' $SCRATCH_MNT 2>/dev/null | grep -q 'stat.mtime') || \
> + test_statx=0
> +
> +echo "Userspace support of large timestamps: $test_bigdates" >> $seqres.full
> +echo "xfs_io support of statx: $test_statx" >> $seqres.full
> +
> +touchme() {
> + local arg="$1"
> + local name="$2"
> +
> + echo "$arg" > $SCRATCH_MNT/t_$name
> + touch -d "$arg" $SCRATCH_MNT/t_$name
> +}
> +
> +report() {
> + local files=($SCRATCH_MNT/t_*)
> + for file in "${files[@]}"; do
> + echo "${file}: $(cat "${file}")"
> + TZ=UTC stat -c '%y %Y %n' "${file}"
> + test $test_statx -gt 0 && \
> + $XFS_IO_PROG -c 'statx -r' "${file}" | grep 'stat.mtime'
> + done
> +}
> +
> +# -2147483648 (S32_MIN, or classic unix min)
> +touchme 'Dec 13 20:45:52 UTC 1901' s32_min
> +
> +# 2147483647 (S32_MAX, or classic unix max)
> +touchme 'Jan 19 03:14:07 UTC 2038' s32_max
> +
> +# 7956915742, all twos
> +touchme 'Feb 22 22:22:22 UTC 2222' all_twos
> +
> +if [ $test_bigdates -gt 0 ]; then
> + # 16299260424 (u64 nsec counter from s32_min, like xfs does)
> + touchme 'Tue Jul 2 20:20:24 UTC 2486' u64ns_from_s32_min
> +
> + # 15032385535 (u34 time if you start from s32_min, like ext4 does)
> + touchme 'May 10 22:38:55 UTC 2446' u34_from_s32_min
> +
> + # 17179869183 (u34 time if you start from the unix epoch)
> + touchme 'May 30 01:53:03 UTC 2514' u34_max
> +
> + # Latest date we can synthesize(?)
> + touchme 'Dec 31 23:59:59 UTC 2147483647' abs_max_time
> +
> + # Earliest date we can synthesize(?)
> + touchme 'Jan 1 00:00:00 UTC 0' abs_min_time
> +fi
> +
> +# Query timestamps from incore
> +echo before >> $seqres.full
> +report > $tmp.before_crash
> +cat $tmp.before_crash >> $seqres.full
> +
> +_scratch_shutdown -f
> +_scratch_cycle_mount
> +
> +# Query timestamps from disk
> +echo after >> $seqres.full
> +report > $tmp.after_crash
> +cat $tmp.after_crash >> $seqres.full
> +
> +# Did they match?
> +cmp -s $tmp.before_crash $tmp.after_crash
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/generic/722.out b/tests/generic/722.out
> new file mode 100644
> index 00000000..83acd5cf
> --- /dev/null
> +++ b/tests/generic/722.out
> @@ -0,0 +1 @@
> +QA output created by 722
> diff --git a/tests/generic/group b/tests/generic/group
> index 033465f1..21ac0c8f 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -260,7 +260,7 @@
> 255 auto quick prealloc punch
> 256 auto quick punch
> 257 dir auto quick
> -258 auto quick
> +258 auto quick bigtime
> 259 auto quick clone zero
> 260 auto quick trim
> 261 auto quick clone collapse
> @@ -404,7 +404,7 @@
> 399 auto encrypt
> 400 auto quick quota
> 401 auto quick
> -402 auto quick rw
> +402 auto quick rw bigtime
> 403 auto quick attr
> 404 auto quick insert
> 405 auto mkfs thin
> @@ -636,3 +636,5 @@
> 631 auto rw overlay rename
> 632 auto quick mount
> 633 auto quick atime attr cap idmapped io_uring mount perms rw unlink
> +721 auto quick atime bigtime
> +722 auto quick atime bigtime shutdown
>
next prev parent reply other threads:[~2021-04-22 21:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 0:23 [PATCHSET v4 0/4] fstests: widen timestamps to deal with y2038+ Darrick J. Wong
2021-04-21 0:23 ` [PATCH 1/4] generic: check userspace handling of extreme timestamps Darrick J. Wong
2021-04-22 21:16 ` Allison Henderson [this message]
2021-04-23 1:07 ` Darrick J. Wong
2021-04-21 0:23 ` [PATCH 2/4] xfs/122: add legacy timestamps to ondisk checker Darrick J. Wong
2021-04-22 21:16 ` Allison Henderson
2021-04-21 0:23 ` [PATCH 3/4] xfs: detect time limits from filesystem Darrick J. Wong
2021-04-22 21:16 ` Allison Henderson
2021-04-21 0:23 ` [PATCH 4/4] xfs: test upgrading filesystem to bigtime Darrick J. Wong
2021-04-21 6:18 ` Amir Goldstein
2021-04-21 16:41 ` Darrick J. Wong
2021-04-22 21:16 ` Allison Henderson
2021-04-25 7:21 ` Eryu Guan
2021-04-25 15:42 ` Darrick J. Wong
-- strict thread matches above, loose matches on Subject: below --
2021-03-31 1:08 [PATCHSET 0/4] fstests: widen timestamps to deal with y2038+ Darrick J. Wong
2021-03-31 1:08 ` [PATCH 1/4] generic: check userspace handling of extreme timestamps Darrick J. Wong
2020-10-27 19:03 [PATCH RFC v6 0/4] xfstests: widen timestamps to deal with y2038+ Darrick J. Wong
2020-10-27 19:04 ` [PATCH 1/4] generic: check userspace handling of extreme timestamps Darrick J. Wong
2020-10-29 10:34 ` Amir Goldstein
2020-10-29 21:00 ` Darrick J. Wong
2020-10-29 21:40 ` Amir Goldstein
2020-10-29 21:59 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b503579-cc85-7c5a-bd67-95352401d39a@oracle.com \
--to=allison.henderson@oracle.com \
--cc=amir73il@gmail.com \
--cc=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guan@eryu.me \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).