Re: [PATCH 3/3] xfs: test that the needsrepair feature works as advertised

[Brian Foster <bfoster@redhat.com>]

On Mon, Apr 12, 2021 at 10:27:58AM -0700, Darrick J. Wong wrote:
> On Sun, Apr 11, 2021 at 09:22:18PM +0800, Eryu Guan wrote:
> > On Thu, Apr 01, 2021 at 06:24:02PM -0700, Darrick J. Wong wrote:
> > > On Wed, Mar 31, 2021 at 12:41:14PM -0400, Brian Foster wrote:
> > > > On Tue, Mar 30, 2021 at 06:08:21PM -0700, Darrick J. Wong wrote:
> > > > > From: Darrick J. Wong <djwong@kernel.org>
> > > > > 
> > > > > Make sure that the needsrepair feature flag can be cleared only by
> > > > > repair and that mounts are prohibited when the feature is set.
> > > > > 
> > > > > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > > > > ---
> > > > >  common/xfs        |   21 +++++++++++
> > > > >  tests/xfs/768     |   82 +++++++++++++++++++++++++++++++++++++++++++
> > > > >  tests/xfs/768.out |    4 ++
> > > > >  tests/xfs/770     |  101 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > >  tests/xfs/770.out |    2 +
> > > > >  tests/xfs/group   |    2 +
> > > > >  6 files changed, 212 insertions(+)
> > > > >  create mode 100755 tests/xfs/768
> > > > >  create mode 100644 tests/xfs/768.out
> > > > >  create mode 100755 tests/xfs/770
> > > > >  create mode 100644 tests/xfs/770.out
> > > > > 
> > > > > 
> > > > ...
> > > > > diff --git a/tests/xfs/768 b/tests/xfs/768
> > > > > new file mode 100755
> > > > > index 00000000..7b909b76
> > > > > --- /dev/null
> > > > > +++ b/tests/xfs/768
> > > > > @@ -0,0 +1,82 @@
> > > > > +#! /bin/bash
> > > > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > > > > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > > > > +#
> > > > > +# FS QA Test No. 768
> > > > > +#
> > > > > +# Make sure that the kernel won't mount a filesystem if repair forcibly sets
> > > > > +# NEEDSREPAIR while fixing metadata.  Corrupt a directory in such a way as
> > > > > +# to force repair to write an invalid dirent value as a sentinel to trigger a
> > > > > +# repair activity in a later phase.  Use a debug knob in xfs_repair to abort
> > > > > +# the repair immediately after forcing the flag on.
> > > > > +
> > > > > +seq=`basename $0`
> > > > > +seqres=$RESULT_DIR/$seq
> > > > > +echo "QA output created by $seq"
> > > > > +
> > > > > +here=`pwd`
> > > > > +tmp=/tmp/$$
> > > > > +status=1    # failure is the default!
> > > > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > > > +
> > > > > +_cleanup()
> > > > > +{
> > > > > +	cd /
> > > > > +	rm -f $tmp.*
> > > > > +}
> > > > > +
> > > > > +# get standard environment, filters and checks
> > > > > +. ./common/rc
> > > > > +. ./common/filter
> > > > > +
> > > > > +# real QA test starts here
> > > > > +_supported_fs xfs
> > > > > +_require_scratch
> > > > > +grep -q LIBXFS_DEBUG_WRITE_CRASH $XFS_REPAIR_PROG || \
> > > > > +		_notrun "libxfs write failure injection hook not detected?"
> > > > > +
> > > > > +rm -f $seqres.full
> > > > > +
> > > > > +# Set up a real filesystem for our actual test
> > > > > +_scratch_mkfs -m crc=1 >> $seqres.full
> > > > > +
> > > > > +# Create a directory large enough to have a dir data block.  2k worth of
> > > > > +# dirent names ought to do it.
> > > > > +_scratch_mount
> > > > > +mkdir -p $SCRATCH_MNT/fubar
> > > > > +for i in $(seq 0 256 2048); do
> > > > > +	fname=$(printf "%0255d" $i)
> > > > > +	ln -s -f urk $SCRATCH_MNT/fubar/$fname
> > > > > +done
> > > > > +inum=$(stat -c '%i' $SCRATCH_MNT/fubar)
> > > > > +_scratch_unmount
> > > > > +
> > > > > +# Fuzz the directory
> > > > > +_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \
> > > > > +	-c "fuzz -d bu[2].inumber add" >> $seqres.full
> > > > > +
> > > > > +# Try to repair the directory, force it to crash after setting needsrepair
> > > > > +LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full
> > > > > +test $? -eq 137 || echo "repair should have been killed??"
> > > > > +_scratch_xfs_db -c 'version' >> $seqres.full
> > > > > +
> > > > > +# We can't mount, right?
> > > > > +_check_scratch_xfs_features NEEDSREPAIR
> > > > > +_try_scratch_mount &> $tmp.mount
> > > > > +res=$?
> > > > > +_filter_scratch < $tmp.mount
> > > > > +if [ $res -eq 0 ]; then
> > > > > +	echo "Should not be able to mount after needsrepair crash"
> > > > > +	_scratch_unmount
> > > > > +fi
> > > > > +
> > > > > +# Repair properly this time and retry the mount
> > > > > +_scratch_xfs_repair 2>> $seqres.full
> > > > > +_scratch_xfs_db -c 'version' >> $seqres.full
> > > > 
> > > > This _scratch_xfs_db() call and the same one a bit earlier both seem
> > > > spurious. Otherwise this test LGTM.
> > > 
> > > Ok, I'll get rid of those.
> > > 
> > > > 
> > > > > +_check_scratch_xfs_features NEEDSREPAIR
> > > > > +
> > > > > +_scratch_mount
> > > > > +
> > > > > +# success, all done
> > > > > +status=0
> > > > > +exit
> > > > > diff --git a/tests/xfs/768.out b/tests/xfs/768.out
> > > > > new file mode 100644
> > > > > index 00000000..1168ba25
> > > > > --- /dev/null
> > > > > +++ b/tests/xfs/768.out
> > > > > @@ -0,0 +1,4 @@
> > > > > +QA output created by 768
> > > > > +FEATURES: NEEDSREPAIR:YES
> > > > > +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
> > > > > +FEATURES: NEEDSREPAIR:NO
> > > > > diff --git a/tests/xfs/770 b/tests/xfs/770
> > > > > new file mode 100755
> > > > > index 00000000..1d0effd9
> > > > > --- /dev/null
> > > > > +++ b/tests/xfs/770
> > > > > @@ -0,0 +1,101 @@
> > > > 
> > > > Can we have one test per patch in the future please?
> > > 
> > > No.  That will cost me a fortune in wasted time rebasing my fstests tree
> > > every time someone adds something to tests/*/group.
> > > 
> > > $ stg ser | wc -l
> > > 106
> > > 
> > > 106 patches total...
> > > 
> > > $ grep -l 'create mode' patches-djwong-dev/ | wc -l
> > > 29
> > > 
> > > 29 of which add a test case of some kind...
> > > 
> > > $ grep 'create mode.*out' patches-djwong-dev/* | wc -l
> > > 119
> > > 
> > > ...for a total of 119 new tests.  My fstests dev tree would double in
> > > size to 196 patches if I implemented that suggestion.  Every Sunday I
> > > rebase my fstests tree, and if it takes ~1min to resolve each merge
> > > error in tests/*/group, it'll now take me two hours instead of thirty
> > 
> > If the group files are the only confliction source, I think you could
> > leave that to me, as for these 7xx or 9xx tests, I'll always need to
> > re-number them and edit group files anyway. Or maybe you could just omit
> > the group file changes? Just leave a note in patch (after the three
> > dashes "---") on which groups it belongs to?
> 
> That won't help, because I still need working group files for fstests to
> run properly.
> 

You could always strip the group file updates into a separate, local
only commit at the top of whatever branch you're managing. If the tests
are also numbered outside of the current upstream target range, I
suspect that would turn a rebase into a single (probably trivial)
conflict resolution.

Brian

> In the long run I think a better solution is to move the group tags into
> the test files themselves and autogenerate the group file as part of the
> build process, but first I want to merge the ~40 or so patches that are
> still in my tree.
> 
> > BTW, I've applied the first two patches in this patchset.
> 
> Thanks!
> 
> --D
> 
> > Thanks,
> > Eryu
> > 
> > > minutes to do this.
> > > 
> > > Please stop making requests of developers that increase their overhead
> > > while doing absolutely nothing to improve code quality.  The fstests
> > > maintainers have never required one test per patch, and it doesn't make
> > > sense to scatter related tests into multiple patches.
> > > 
> > > > > +#! /bin/bash
> > > > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > > > > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > > > > +#
> > > > > +# FS QA Test No. 770
> > > > > +#
> > > > > +# Populate a filesystem with all types of metadata, then run repair with the
> > > > > +# libxfs write failure trigger set to go after a single write.  Check that the
> > > > > +# injected error trips, causing repair to abort, that needsrepair is set on the
> > > > > +# fs, the kernel won't mount; and that a non-injecting repair run clears
> > > > > +# needsrepair and makes the filesystem mountable again.
> > > > > +#
> > > > > +# Repeat with the trip point set to successively higher numbers of writes until
> > > > > +# we hit ~200 writes or repair manages to run to completion without tripping.
> > > > > +
> > > > 
> > > > Nice test..
> > > > 
> > > > > +seq=`basename $0`
> > > > > +seqres=$RESULT_DIR/$seq
> > > > > +echo "QA output created by $seq"
> > > > > +
> > > > > +here=`pwd`
> > > > > +tmp=/tmp/$$
> > > > > +status=1    # failure is the default!
> > > > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > > > +
> > > > > +_cleanup()
> > > > > +{
> > > > > +	cd /
> > > > > +	rm -f $tmp.*
> > > > > +}
> > > > > +
> > > > > +# get standard environment, filters and checks
> > > > > +. ./common/rc
> > > > > +. ./common/populate
> > > > > +. ./common/filter
> > > > > +
> > > > > +# real QA test starts here
> > > > > +_supported_fs xfs
> > > > > +
> > > > > +_require_scratch_xfs_crc		# needsrepair only exists for v5
> > > > > +_require_populate_commands
> > > > > +
> > > > > +rm -f ${RESULT_DIR}/require_scratch	# we take care of checking the fs
> > > > > +rm -f $seqres.full
> > > > > +
> > > > > +max_writes=200			# 200 loops should be enough for anyone
> > > > > +nr_incr=$((13 / TIME_FACTOR))
> > > > 
> > > > I'm not sure how time factor is typically used, but perhaps we should
> > > > sanity check that nr_incr > 0.
> > > 
> > > Good catch.
> > > 
> > > > Also, could we randomize the increment value a bit to add some variance
> > > > to the test? That could be done here or we could turn this into a min
> > > > increment value or something based on time factor and randomize the
> > > > increment in the loop, which might be a little more effective of a test.
> > > > 
> > > > > +test $nr_incr -lt 1 && nr_incr=1
> > > > > +for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do
> > > > > +	test -w /dev/ttyprintk && \
> > > > > +		echo "fail after $nr_writes writes" >> /dev/ttyprintk
> > > > > +	echo "fail after $nr_writes writes" >> $seqres.full
> > > > 
> > > > What is this for?
> > > 
> > > This synchronizes the kernel output with whatever step we're on of the
> > > loop.
> > > 
> > > > 
> > > > > +
> > > > > +	# Populate the filesystem
> > > > > +	_scratch_populate_cached nofill >> $seqres.full 2>&1
> > > > > +
> > > > 
> > > > If I understand this correctly, this will fill up the fs and populate
> > > > some kind of background cache with a metadump to facilitate restoring
> > > > the state on repeated calls. I see this speeds things up a bit from the
> > > > initial run, but I'm also wondering if we really need to reset this
> > > > state on every iteration. Would we expect much difference in behavior if
> > > > we populated once at the start of the test and then just bumped up the
> > > > write count until we get to the max or the repair completes?
> > > 
> > > Probably not?  You're probably right that there's no need to repopulate
> > > each time... provided that repair going down doesn't corrupt the fs and
> > > thereby screw up each further iteration.
> > > 
> > > (I noticed that repair can really mess things up if it dies in just the
> > > wrong places...)
> > > 
> > > > FWIW, a quick hack to test that out reduces my (cache cold, cache hot)
> > > > run times of this test from something like (~4m, ~1m) to (~3m, ~12s).
> > > > That's probably not quite quick group territory, but still a decent
> > > > time savings.
> > > 
> > > I mean ... I could just run fsstress for ~1000 ops to populate the
> > > filesystem.
> > > 
> > > > 
> > > > > +	# Start a repair and force it to abort after some number of writes
> > > > > +	LIBXFS_DEBUG_WRITE_CRASH=ddev=$nr_writes _scratch_xfs_repair 2>> $seqres.full
> > > > > +	res=$?
> > > > > +	if [ $res -ne 0 ] && [ $res -ne 137 ]; then
> > > > > +		echo "repair failed with $res??"
> > > > > +		break
> > > > > +	elif [ $res -eq 0 ]; then
> > > > > +		[ $nr_writes -eq 1 ] && \
> > > > > +			echo "ran to completion on the first try?"
> > > > > +		break
> > > > > +	fi
> > > > > +
> > > > > +	_scratch_xfs_db -c 'version' >> $seqres.full
> > > > 
> > > > Why?
> > > > 
> > > > > +	if _check_scratch_xfs_features NEEDSREPAIR > /dev/null; then
> > > > > +		# NEEDSREPAIR is set, so check that we can't mount.
> > > > > +		_try_scratch_mount &>> $seqres.full
> > > > > +		if [ $? -eq 0 ]; then
> > > > > +			echo "Should not be able to mount after repair crash"
> > > > > +			_scratch_unmount
> > > > > +		fi
> > > > 
> > > > Didn't the previous test verify that the filesystem doesn't mount if
> > > > NEEDSREPAIR?
> > > 
> > > Yes.  I'll remove them both.
> > > 
> > > --D
> > > 
> > > > > +	elif _scratch_xfs_repair -n &>> $seqres.full; then
> > > > > +		# NEEDSREPAIR was not set, but repair -n didn't find problems.
> > > > > +		# It's possible that the write failure injector triggered on
> > > > > +		# the write that clears NEEDSREPAIR.
> > > > > +		true
> > > > > +	else
> > > > > +		# NEEDSREPAIR was not set, but there are errors!
> > > > > +		echo "NEEDSREPAIR should be set on corrupt fs"
> > > > > +	fi
> > > > > +
> > > > > +	# Repair properly this time and retry the mount
> > > > > +	_scratch_xfs_repair 2>> $seqres.full
> > > > > +	_scratch_xfs_db -c 'version' >> $seqres.full
> > > > > +	_check_scratch_xfs_features NEEDSREPAIR > /dev/null && \
> > > > > +		echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test"
> > > > > +
> > > > 
> > > > Same here. It probably makes sense to test that NEEDSREPAIR remains set
> > > > throughout the test sequence until repair completes cleanly, but I'm not
> > > > sure we need to repeat the mount cycle every go around.
> > > > 
> > > > Brian
> > > > 
> > > > > +	# Make sure all the checking tools think this fs is ok
> > > > > +	_scratch_mount
> > > > > +	_check_scratch_fs
> > > > > +	_scratch_unmount
> > > > > +done
> > > > > +
> > > > > +# success, all done
> > > > > +echo Silence is golden.
> > > > > +status=0
> > > > > +exit
> > > > > diff --git a/tests/xfs/770.out b/tests/xfs/770.out
> > > > > new file mode 100644
> > > > > index 00000000..725d740b
> > > > > --- /dev/null
> > > > > +++ b/tests/xfs/770.out
> > > > > @@ -0,0 +1,2 @@
> > > > > +QA output created by 770
> > > > > +Silence is golden.
> > > > > diff --git a/tests/xfs/group b/tests/xfs/group
> > > > > index fe83f82d..09fddb5a 100644
> > > > > --- a/tests/xfs/group
> > > > > +++ b/tests/xfs/group
> > > > > @@ -520,3 +520,5 @@
> > > > >  537 auto quick
> > > > >  538 auto stress
> > > > >  539 auto quick mount
> > > > > +768 auto quick repair
> > > > > +770 auto repair
> > > > > 
> > > > 
>