Git Mailing List Archive on lore.kernel.org
 help / color / Atom feed
* RE: [ANNOUNCE] Git v2.27.0-rc0 - Results on HPE NonStop TNS/X
@ 2020-05-18 17:07 Randall S. Becker
  0 siblings, 0 replies; only message in thread
From: Randall S. Becker @ 2020-05-18 17:07 UTC (permalink / raw)
  To: 'Junio C Hamano', git

On May 14, 2020 7:28 PM, Junio C Hamano wrote:
> An early preview release Git v2.27.0-rc0 is now available for
> testing at the usual places.  It is comprised of 479 non-merge
> commits since v2.26.0, contributed by 53 people, 16 of which are
> new faces.

All tests passed except, t9001 and t9020, which is normal.

t0301 subtest 8 (1x), 11 (3x), 12 (1x), 26 (2x), still randomly fail when run 10 times, but I can't reproduce any of the failures 100% of the time. Number of failures of each is listed. For 26, the removal of a socket is not instantaneous on a MPP system, so this may be partly at fault. It can take a few microseconds, which is less than the time it takes to execute that subtest from end-to-end. If the system is heavily loaded, the results are different. Checking that a file that was created is no longer there, unless you are doing an explicit rm in the same script, is not a good plan in this platform. It looks like that 'git credential-cache exit' may be happening in a different logical CPU from the test script so it takes non-zero time for the file system on the script's logical CPU to see the removal. If I stick a sleep 5 (to be paranoid) into subtest 26, the subtest becomes a stable pass.

Regards,
Randall


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-18 17:07 [ANNOUNCE] Git v2.27.0-rc0 - Results on HPE NonStop TNS/X Randall S. Becker

Git Mailing List Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/git/0 git/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 git git/ https://lore.kernel.org/git \
		git@vger.kernel.org
	public-inbox-index git

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.git


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git