From: Jeff King <peff@peff.net>
To: Junio C Hamano <gitster@pobox.com>
Cc: git@vger.kernel.org, pclouds@gmail.com, avila.jn@gmail.com
Subject: Re: [PATCH 3/4] attr.c::path_matches(): special case paths that end with a slash
Date: Thu, 28 Mar 2013 15:49:25 -0400 [thread overview]
Message-ID: <20130328194924.GA21095@sigill.intra.peff.net> (raw)
In-Reply-To: <20130326190558.GC26462@sigill.intra.peff.net>
On Tue, Mar 26, 2013 at 03:05:58PM -0400, Jeff King wrote:
> On Tue, Mar 26, 2013 at 11:39:30AM -0700, Junio C Hamano wrote:
>
> > A similar adjustment for match_pathname() might be needed, but I
> > didn't look into it.
> [...]
> We do seem to use strncmp_icase through the rest of the function,
> though, which should be OK. The one exception is that we call fnmatch at
> the end. Should the allocation hack from the previous patch make its way
> into an "fnmatch_icase_bytes()" function, so we can use it here, too?
> And then when we have a more efficient solution, we can just plug it in
> there.
Hmm, yeah, there is more going on here than just that. If I add the
tests below, the first one (a wildcard) passes, because you fixed the
fnmatch code path. But the deep/ ones do not, as they should be going
through match_pathname. I expected the deep/with/wildcard one to fail
(because of the fnmatch problem I mentioned above), but not the
deep/and/slashless one, which should be using strncmp. I'll see if I can
track down the cause.
-Peff
---
diff --git a/t/t5002-archive-attr-pattern.sh b/t/t5002-archive-attr-pattern.sh
index 3be809c..234a615 100755
--- a/t/t5002-archive-attr-pattern.sh
+++ b/t/t5002-archive-attr-pattern.sh
@@ -32,6 +32,21 @@ test_expect_success 'setup' '
git add ignored-without-slash/foo &&
echo ignored-without-slash export-ignore >>.git/info/attributes &&
+ mkdir -p wildcard-without-slash &&
+ echo "ignored without slash" >wildcard-without-slash/foo &&
+ git add wildcard-without-slash/foo &&
+ echo "wild*-without-slash export-ignore" >>.git/info/attributes &&
+
+ mkdir -p deep/and/slashless &&
+ echo "ignored without slash" >deep/and/slashless/foo &&
+ git add deep/and/slashless/foo &&
+ echo deep/and/slashless export-ignore >>.git/info/attributes &&
+
+ mkdir -p deep/with/wildcard &&
+ echo "ignored without slash" >deep/with/wildcard/foo &&
+ git add deep/with/wildcard/foo &&
+ echo "deep/*t*/wildcard export-ignore" >>.git/info/attributes &&
+
mkdir -p one-level-lower/two-levels-lower/ignored-only-if-dir &&
echo ignored by ignored dir >one-level-lower/two-levels-lower/ignored-only-if-dir/ignored-by-ignored-dir &&
git add one-level-lower &&
@@ -55,6 +70,12 @@ test_expect_missing archive/ignored-without-slash/foo &&
test_expect_missing archive/ignored-ony-if-dir/ignored-by-ignored-dir
test_expect_missing archive/ignored-without-slash/ &&
test_expect_missing archive/ignored-without-slash/foo &&
+test_expect_missing archive/wildcard-without-slash/
+test_expect_missing archive/wildcard-without-slash/foo &&
+test_expect_missing archive/deep/and/slashless/ &&
+test_expect_missing archive/deep/and/slashless/foo &&
+test_expect_missing archive/deep/with/wildcard/ &&
+test_expect_missing archive/deep/with/wildcard/foo &&
test_expect_exists archive/one-level-lower/
test_expect_missing archive/one-level-lower/two-levels-lower/ignored-only-if-dir/
test_expect_missing archive/one-level-lower/two-levels-lower/ignored-ony-if-dir/ignored-by-ignored-dir
next prev parent reply other threads:[~2013-03-28 19:50 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-19 17:57 [regression?] trailing slash required in .gitattributes Jeff King
2013-03-19 18:10 ` Junio C Hamano
2013-03-19 18:10 ` Jeff King
2013-03-22 22:24 ` Jeff King
2013-03-22 23:08 ` Junio C Hamano
2013-03-23 8:39 ` Jeff King
2013-03-24 5:25 ` Junio C Hamano
2013-03-26 18:39 ` [PATCH 0/4] attribute regression fix for maint-1.8.1 and upward Junio C Hamano
2013-03-26 18:39 ` [PATCH 1/4] attr.c::path_matches(): the basename is part of the pathname Junio C Hamano
2013-03-26 18:49 ` Jeff King
2013-03-27 1:40 ` Duy Nguyen
2013-03-26 18:39 ` [PATCH 2/4] dir.c::match_basename(): pay attention to the length of string parameters Junio C Hamano
2013-03-26 18:55 ` Jeff King
2013-03-26 20:39 ` Jeff King
2013-03-26 20:49 ` Junio C Hamano
2013-03-26 21:29 ` Jeff King
2013-03-26 22:33 ` Junio C Hamano
2013-03-27 1:04 ` Jeff King
2013-03-26 18:39 ` [PATCH 3/4] attr.c::path_matches(): special case paths that end with a slash Junio C Hamano
2013-03-26 19:05 ` Jeff King
2013-03-26 21:33 ` Jeff King
2013-03-27 1:30 ` Duy Nguyen
2013-03-28 19:49 ` Jeff King [this message]
2013-03-26 18:39 ` [PATCH 4/4] make sure a pattern without trailing slash matches a directory Junio C Hamano
2013-03-26 19:08 ` Jeff King
2013-03-27 1:13 ` [PATCH 0/4] attribute regression fix for maint-1.8.1 and upward Duy Nguyen
2013-03-27 3:57 ` Junio C Hamano
2013-03-27 4:01 ` Duy Nguyen
2013-03-28 21:43 ` [PATCH v2 0/6] " Jeff King
2013-03-28 21:45 ` [PATCH 1/6] attr.c::path_matches(): the basename is part of the pathname Jeff King
2013-03-28 21:47 ` [PATCH 2/6] dir.c::match_basename(): pay attention to the length of string parameters Jeff King
2013-03-28 22:40 ` Jeff King
2013-03-28 22:49 ` Jeff King
2013-03-28 23:10 ` Junio C Hamano
2013-03-28 23:40 ` Duy Nguyen
2013-03-29 1:25 ` Duy Nguyen
2013-03-29 3:02 ` Jeff King
2013-03-29 5:57 ` Junio C Hamano
2013-03-28 21:47 ` [PATCH 3/6] dir.c::match_pathname(): adjust patternlen when shifting pattern Jeff King
2013-03-28 21:48 ` [PATCH 4/6] dir.c::match_pathname(): pay attention to the length of string parameters Jeff King
2013-03-28 22:30 ` Junio C Hamano
2013-03-29 8:45 ` Duy Nguyen
2013-03-29 10:03 ` Duy Nguyen
2013-03-29 11:32 ` Torsten Bögershausen
2013-03-29 11:37 ` Duy Nguyen
2013-03-29 12:05 ` Jeff King
2013-03-29 13:02 ` Duy Nguyen
2013-03-29 16:44 ` Junio C Hamano
2013-03-29 17:04 ` Jeff King
2013-03-29 17:35 ` Junio C Hamano
2013-03-29 17:44 ` Jeff King
2013-03-30 1:40 ` Duy Nguyen
2013-03-28 21:49 ` [PATCH 5/6] attr.c::path_matches(): special case paths that end with a slash Jeff King
2013-03-28 21:50 ` [PATCH 6/6] t: check that a pattern without trailing slash matches a directory Jeff King
2013-03-28 22:21 ` Eric Sunshine
2013-03-28 22:22 ` Jeff King
2013-03-23 4:18 ` [regression?] trailing slash required in .gitattributes Duy Nguyen
2013-03-23 4:43 ` Duy Nguyen
2013-03-25 6:05 ` [PATCH 0/4] attr directory matching regression Nguyễn Thái Ngọc Duy
2013-03-25 6:05 ` [PATCH 1/4] wildmatch: do not require "text" to be NUL-terminated Nguyễn Thái Ngọc Duy
2013-03-25 6:05 ` [PATCH 2/4] attr.c: fix pattern{,len} inconsistency in struct match_attr Nguyễn Thái Ngọc Duy
2013-03-25 6:05 ` [PATCH 3/4] dir.c: make match_{base,path}name respect {basename,path}len Nguyễn Thái Ngọc Duy
2013-03-25 6:05 ` [PATCH 4/4] attr.c: fix matching "subdir" without the trailing slash Nguyễn Thái Ngọc Duy
2013-03-25 7:20 ` Duy Nguyen
2013-03-25 9:24 ` Duy Nguyen
2013-03-26 15:10 ` [PATCH 0/4] attr directory matching regression Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130328194924.GA21095@sigill.intra.peff.net \
--to=peff@peff.net \
--cc=avila.jn@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=pclouds@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).