From: Jeff King <peff@peff.net>
To: git@vger.kernel.org
Subject: [PATCH 21/25] t9001: use test_when_finished
Date: Fri, 20 Mar 2015 06:13:22 -0400 [thread overview]
Message-ID: <20150320101321.GU12543@peff.net> (raw)
In-Reply-To: <20150320100429.GA17354@peff.net>
The confirmation tests in t9001 all save the value of
sendemail.confirm, do something to it, then restore it at
the end, in a way that breaks the &&-chain (they are not
wrong, because they save the $? value, but it fools
--chain-lint).
Instead, they can all use test_when_finished, and we can
even make the code simpler by factoring out the shared
lines.
Note that we can _almost_ use test_config here, except that:
1. We do not restore the config with test_unconfig, but by
setting it back to some prior value.
2. We are not always setting a config variable. Sometimes
the change to be undone is unsetting it entirely.
We could teach test_config to handle these cases, but it's
not worth the complexity for a single call-site.
Signed-off-by: Jeff King <peff@peff.net>
---
t/t9001-send-email.sh | 30 ++++++++++--------------------
1 file changed, 10 insertions(+), 20 deletions(-)
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index 37caa18..c9f54d5 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -817,26 +817,25 @@ test_expect_success $PREREQ '--confirm=compose' '
test_confirm --confirm=compose --compose
'
-test_expect_success $PREREQ 'confirm by default (due to cc)' '
+save_confirm () {
CONFIRM=$(git config --get sendemail.confirm) &&
+ test_when_finished "git config sendemail.confirm ${CONFIRM:-never}"
+}
+
+test_expect_success $PREREQ 'confirm by default (due to cc)' '
+ save_confirm &&
git config --unset sendemail.confirm &&
test_confirm
- ret="$?"
- git config sendemail.confirm ${CONFIRM:-never}
- test $ret = "0"
'
test_expect_success $PREREQ 'confirm by default (due to --compose)' '
- CONFIRM=$(git config --get sendemail.confirm) &&
+ save_confirm &&
git config --unset sendemail.confirm &&
test_confirm --suppress-cc=all --compose
- ret="$?"
- git config sendemail.confirm ${CONFIRM:-never}
- test $ret = "0"
'
test_expect_success $PREREQ 'confirm detects EOF (inform assumes y)' '
- CONFIRM=$(git config --get sendemail.confirm) &&
+ save_confirm &&
git config --unset sendemail.confirm &&
rm -fr outdir &&
git format-patch -2 -o outdir &&
@@ -846,13 +845,10 @@ test_expect_success $PREREQ 'confirm detects EOF (inform assumes y)' '
--to=nobody@example.com \
--smtp-server="$(pwd)/fake.sendmail" \
outdir/*.patch </dev/null
- ret="$?"
- git config sendemail.confirm ${CONFIRM:-never}
- test $ret = "0"
'
test_expect_success $PREREQ 'confirm detects EOF (auto causes failure)' '
- CONFIRM=$(git config --get sendemail.confirm) &&
+ save_confirm &&
git config sendemail.confirm auto &&
GIT_SEND_EMAIL_NOTTY=1 &&
export GIT_SEND_EMAIL_NOTTY &&
@@ -861,13 +857,10 @@ test_expect_success $PREREQ 'confirm detects EOF (auto causes failure)' '
--to=nobody@example.com \
--smtp-server="$(pwd)/fake.sendmail" \
$patches </dev/null
- ret="$?"
- git config sendemail.confirm ${CONFIRM:-never}
- test $ret = "0"
'
test_expect_success $PREREQ 'confirm does not loop forever' '
- CONFIRM=$(git config --get sendemail.confirm) &&
+ save_confirm &&
git config sendemail.confirm auto &&
GIT_SEND_EMAIL_NOTTY=1 &&
export GIT_SEND_EMAIL_NOTTY &&
@@ -876,9 +869,6 @@ test_expect_success $PREREQ 'confirm does not loop forever' '
--to=nobody@example.com \
--smtp-server="$(pwd)/fake.sendmail" \
$patches
- ret="$?"
- git config sendemail.confirm ${CONFIRM:-never}
- test $ret = "0"
'
test_expect_success $PREREQ 'utf8 Cc is rfc2047 encoded' '
--
2.3.3.520.g3cfbb5d
next prev parent reply other threads:[~2015-03-20 10:13 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 10:04 [PATCH 0/25] detecting &&-chain breakage Jeff King
2015-03-20 10:05 ` [PATCH 01/25] t/test-lib: introduce --chain-lint option Jeff King
2015-03-25 2:53 ` SZEDER Gábor
2015-03-25 3:05 ` Jeff King
2015-03-20 10:06 ` [PATCH 02/25] t: fix severe &&-chain breakage Jeff King
2015-03-20 10:06 ` [PATCH 03/25] t: fix moderate " Jeff King
2015-03-20 10:07 ` [PATCH 04/25] t: fix trivial " Jeff King
2015-03-20 10:07 ` [PATCH 05/25] t: assume test_cmp produces verbose output Jeff King
2015-03-20 10:09 ` [PATCH 06/25] t: use verbose instead of hand-rolled errors Jeff King
2015-03-20 10:09 ` [PATCH 07/25] t: use test_must_fail instead of hand-rolled blocks Jeff King
2015-03-20 10:10 ` [PATCH 08/25] t: fix &&-chaining issues around setup which might fail Jeff King
2015-03-20 10:11 ` [PATCH 09/25] t: use test_might_fail for diff and grep Jeff King
2015-03-20 10:11 ` [PATCH 10/25] t: use test_expect_code instead of hand-rolled comparison Jeff King
2015-03-20 10:12 ` [PATCH 11/25] t: wrap complicated expect_code users in a block Jeff King
2015-03-20 10:12 ` [PATCH 12/25] t: avoid using ":" for comments Jeff King
2015-03-20 10:12 ` [PATCH 13/25] t3600: fix &&-chain breakage for setup commands Jeff King
2015-03-20 10:12 ` [PATCH 14/25] t7201: fix &&-chain breakage Jeff King
2015-03-20 10:13 ` [PATCH 15/25] t9502: " Jeff King
2015-03-20 17:48 ` Johannes Sixt
2015-03-20 18:03 ` Jeff King
2015-03-20 10:13 ` [PATCH 16/25] t6030: use modern test_* helpers Jeff King
2015-03-20 10:13 ` [PATCH 17/25] t0020: " Jeff King
2015-03-25 0:23 ` SZEDER Gábor
2015-03-25 2:56 ` Jeff King
2015-03-25 5:24 ` [PATCH 0/8] more &&-chaining test fixups Jeff King
2015-03-25 5:25 ` [PATCH 1/8] perf-lib: fix ignored exit code inside loop Jeff King
2015-03-25 5:28 ` [PATCH 2/8] t0020: fix ignored exit code inside loops Jeff King
2015-03-25 5:28 ` [PATCH 3/8] t3305: fix ignored exit code inside loop Jeff King
2015-03-25 8:40 ` Johan Herland
2015-03-25 5:29 ` [PATCH 4/8] t7701: " Jeff King
2015-03-25 5:29 ` [PATCH 5/8] t: fix some trivial cases of ignored exit codes in loops Jeff King
2015-03-25 5:30 ` [PATCH 6/8] t: simplify loop exit-code status variables Jeff King
2015-03-25 17:27 ` Junio C Hamano
2015-03-25 17:43 ` Jeff King
2015-03-25 5:31 ` [PATCH 7/8] t0020: use test_* helpers instead of hand-rolled messages Jeff King
2015-03-25 5:32 ` [PATCH 8/8] t9001: drop save_confirm helper Jeff King
2015-03-25 17:29 ` [PATCH 0/8] more &&-chaining test fixups Junio C Hamano
2015-03-20 10:13 ` [PATCH 18/25] t1301: use modern test_* helpers Jeff King
2015-03-24 23:51 ` SZEDER Gábor
2015-03-25 2:45 ` Jeff King
2015-03-20 10:13 ` [PATCH 19/25] t6034: " Jeff King
2015-03-24 23:43 ` SZEDER Gábor
2015-03-20 10:13 ` [PATCH 20/25] t4117: " Jeff King
2015-03-20 10:13 ` Jeff King [this message]
2015-03-25 2:00 ` [PATCH 21/25] t9001: use test_when_finished SZEDER Gábor
2015-03-25 2:47 ` Jeff King
2015-03-20 10:13 ` [PATCH 22/25] t0050: appease --chain-lint Jeff King
2015-03-20 10:13 ` [PATCH 23/25] t7004: fix embedded single-quotes Jeff King
2015-03-20 10:13 ` [PATCH 24/25] t0005: fix broken &&-chains Jeff King
2015-03-20 10:13 ` [PATCH 25/25] t4104: drop hand-rolled error reporting Jeff King
2015-03-20 10:23 ` [PATCH 0/25] detecting &&-chain breakage Jeff King
2015-03-20 14:28 ` Michael J Gruber
2015-03-20 14:32 ` [PATCH 26/27] t/*svn*: fix moderate " Michael J Gruber
2015-03-20 14:32 ` [PATCH 27/27] t9104: fix test for following larger parents Michael J Gruber
2015-03-20 18:04 ` [PATCH 26/27] t/*svn*: fix moderate &&-chain breakage Junio C Hamano
2015-03-20 19:35 ` Junio C Hamano
2015-03-20 20:02 ` Jeff King
2015-03-20 20:13 ` Jeff King
2015-03-23 9:36 ` Michael J Gruber
2015-03-20 17:57 ` [PATCH 0/25] detecting " Jeff King
2015-03-20 17:44 ` Junio C Hamano
2015-03-20 18:00 ` Junio C Hamano
2015-03-20 18:04 ` Jeff King
2015-03-20 18:33 ` Junio C Hamano
2015-03-20 23:18 ` Eric Sunshine
2015-03-21 8:19 ` Jeff King
2015-03-21 18:01 ` Junio C Hamano
2015-03-21 22:23 ` Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150320101321.GU12543@peff.net \
--to=peff@peff.net \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).