Git Mailing List Archive on lore.kernel.org
 help / color / Atom feed
From: Jeff King <peff@peff.net>
To: Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>
Cc: git@vger.kernel.org, Johannes Schindelin <johannes.schindelin@gmx.de>
Subject: Re: [PATCH 2/2] tests(gpg): increase verbosity to allow debugging
Date: Mon, 23 Mar 2020 13:32:58 -0400
Message-ID: <20200323173258.GA3977@coredump.intra.peff.net> (raw)
In-Reply-To: <dd26cb05a37a54d9d245823772d33fe0daab8ffa.1584968990.git.gitgitgadget@gmail.com>

On Mon, Mar 23, 2020 at 01:09:50PM +0000, Johannes Schindelin via GitGitGadget wrote:

> From: Johannes Schindelin <johannes.schindelin@gmx.de>
> 
> Especially when debugging a test failure that can only be reproduced in
> the CI build (e.g. when the developer has no access to a macOS machine
> other than running the tests on a macOS build agent), output should not
> be suppressed.
> 
> In the instance of `hi/gpg-prefer-check-signature`, where one
> GPG-related test failed for no apparent reason, the entire output of
> `gpg` and `gpgsm` was suppressed, even in verbose mode, leaving
> interested readers no clue what was going wrong.
> 
> Let's fix this by redirecting the output not to `/dev/null`, but to the
> file descriptors that may, or may not, be redirected via
> `--verbose-log`. For good measure, also turn on tracing if the user
> asked for it, and prefix it with a helpful info message.

It definitely makes sense for this info to be shown in verbose (and
"-x") mode. I'm OK with this patch as easiest way to get from A to B,
but I think the existing code shows a bit of an anti-pattern: trying to
do too much outside of test blocks where verbosity and tracing is
already handled.

In this case if the whole thing were in a "test_lazy_prereq" we would
have gotten all that for free. I don't think the laziness would matter
too much in practice, though it is a little funny that it has side
effects (like setting up $GPGHOME). Having an immediate version like
"test_check_prereq" would make sense to me.

I don't know if it's worth re-doing this patch (I'll leave that decision
to you). But something to keep in mind when we run into similar
situations (or are writing new prereq code).

-Peff

  reply index

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-23 13:09 [PATCH 0/2] Enable GPG in the Windows part of the CI/PR builds Johannes Schindelin via GitGitGadget
2020-03-23 13:09 ` [PATCH 1/2] tests(gpg): allow the gpg-agent to start on Windows Johannes Schindelin via GitGitGadget
2020-03-23 17:46   ` Junio C Hamano
2020-03-24 19:55     ` Johannes Schindelin
2020-03-24 20:59       ` Junio C Hamano
2020-03-24 22:26         ` Johannes Schindelin
2020-03-24 23:40           ` Junio C Hamano
2020-03-23 13:09 ` [PATCH 2/2] tests(gpg): increase verbosity to allow debugging Johannes Schindelin via GitGitGadget
2020-03-23 17:32   ` Jeff King [this message]
2020-03-23 18:04     ` Jeff King
2020-03-23 19:21       ` Junio C Hamano
2020-03-23 20:15         ` Jeff King
2020-03-23 21:28           ` Junio C Hamano
2020-03-23 21:31             ` Jeff King
2020-03-24 21:41               ` Johannes Schindelin
2020-03-24 22:05                 ` Jeff King
2020-03-24 22:25                   ` Johannes Schindelin
2020-03-24 22:33                     ` Jeff King
2020-03-25  5:41 ` [PATCH v2 0/5] Enable GPG in the Windows part of the CI/PR builds Johannes Schindelin via GitGitGadget
2020-03-25  5:41   ` [PATCH v2 1/5] tests(gpg): allow the gpg-agent to start on Windows Johannes Schindelin via GitGitGadget
2020-03-25  5:41   ` [PATCH v2 2/5] t/lib-gpg.sh: stop pretending to be a stand-alone script Johannes Schindelin via GitGitGadget
2020-03-26  8:21     ` Jeff King
2020-03-26 13:48       ` Johannes Schindelin
2020-03-26 19:31       ` Junio C Hamano
2020-03-25  5:41   ` [PATCH v2 3/5] tests: turn GPG, GPGSM and RFC1991 into lazy prereqs Johannes Schindelin via GitGitGadget
2020-03-25 17:25     ` Junio C Hamano
2020-03-26  8:35     ` Jeff King
2020-03-26 14:27       ` Johannes Schindelin
2020-03-27  9:10         ` Jeff King
2020-03-27 17:44           ` Junio C Hamano
2020-03-27 20:24             ` Eric Sunshine
2020-03-27 21:37               ` Junio C Hamano
2020-03-28 10:58                 ` Jeff King
2020-03-28 10:54             ` Jeff King
2020-03-28 23:49               ` [PATCH v2] t/README: suggest how to leave test early with failure Junio C Hamano
2020-03-29  7:23                 ` Eric Sunshine
2020-03-29 14:33                 ` Jeff King
2020-03-30 18:39           ` [PATCH v2 3/5] tests: turn GPG, GPGSM and RFC1991 into lazy prereqs Johannes Schindelin
2020-03-31  9:34             ` Jeff King
2020-03-25  5:41   ` [PATCH v2 4/5] tests: do not let lazy prereqs inside `test_expect_*` turn off tracing Johannes Schindelin via GitGitGadget
2020-03-25 17:23     ` Junio C Hamano
2020-03-26 13:45       ` Johannes Schindelin
2020-03-26  8:49     ` Jeff King
2020-03-26 14:34       ` Johannes Schindelin
2020-03-25  5:41   ` [PATCH v2 5/5] tests: increase the verbosity of the GPG-related prereqs Johannes Schindelin via GitGitGadget
2020-03-26  8:50     ` Jeff King
2020-03-26 14:36       ` Johannes Schindelin
2020-03-26 15:35   ` [PATCH v3 0/5] Enable GPG in the Windows part of the CI/PR builds Johannes Schindelin via GitGitGadget
2020-03-26 15:35     ` [PATCH v3 1/5] tests(gpg): allow the gpg-agent to start on Windows Johannes Schindelin via GitGitGadget
2020-03-26 15:35     ` [PATCH v3 2/5] t/lib-gpg.sh: stop pretending to be a stand-alone script Johannes Schindelin via GitGitGadget
2020-03-26 15:35     ` [PATCH v3 3/5] tests: do not let lazy prereqs inside `test_expect_*` turn off tracing Johannes Schindelin via GitGitGadget
2020-03-26 15:35     ` [PATCH v3 4/5] tests: turn GPG, GPGSM and RFC1991 into lazy prereqs Johannes Schindelin via GitGitGadget
2020-03-26 15:35     ` [PATCH v3 5/5] tests: increase the verbosity of the GPG-related prereqs Johannes Schindelin via GitGitGadget
2020-03-27  9:12     ` [PATCH v3 0/5] Enable GPG in the Windows part of the CI/PR builds Jeff King
2020-03-27 17:45       ` Junio C Hamano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200323173258.GA3977@coredump.intra.peff.net \
    --to=peff@peff.net \
    --cc=git@vger.kernel.org \
    --cc=gitgitgadget@gmail.com \
    --cc=johannes.schindelin@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Git Mailing List Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/git/0 git/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 git git/ https://lore.kernel.org/git \
		git@vger.kernel.org
	public-inbox-index git

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.git


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git