Git Mailing List Archive on lore.kernel.org
 help / color / Atom feed
From: Jeff King <peff@peff.net>
To: Elijah Newren via GitGitGadget <gitgitgadget@gmail.com>
Cc: git@vger.kernel.org, Phillip Wood <phillip.wood123@gmail.com>,
	Taylor Blau <me@ttaylorr.com>, Elijah Newren <newren@gmail.com>
Subject: Re: [PATCH v2 3/3] test-lib: reduce verbosity of skipped tests
Date: Wed, 14 Oct 2020 12:53:29 -0400
Message-ID: <20201014165329.GA21687@coredump.intra.peff.net> (raw)
In-Reply-To: <85a4ca164a9f665016d4aad0f29cbef6f62f36b0.1602616786.git.gitgitgadget@gmail.com>

On Tue, Oct 13, 2020 at 07:19:46PM +0000, Elijah Newren via GitGitGadget wrote:

> From: Elijah Newren <newren@gmail.com>
> 
> When using the --run flag to run just two or three tests from a test
> file which contains several dozen tests, having every skipped test print
> out dozens of lines of output for the test code for that skipped test
> adds up to hundreds or thousands of lines of irrelevant output that make
> it very hard to fish out the relevant results you were looking for.
> Simplify the output for skipped tests down to just showing the one-line
> descriptions.

This last sentence is inaccurate in this version, isn't it?

Other than that, I think this is a good change (I admit I never noticed
the irrelevant output because it is only shown with "-v", and that is
already full of irrelevant bits. But I have trouble imagining how it
would be useful).

Earlier discussion mentioned shortening the "ok 2 # skip" line, but I
think removing this fd-3 version is the only sane direction. The other
one gets parsed by TAP tools like prove, and may be shown. E.g., "prove
--directive t0003-attributes.sh" shows the description of the skipped
tests (likewise, "-v" shows all tests but highlights the skipped ones).

-Peff

  reply index

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-12 23:26 [PATCH 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Elijah Newren via GitGitGadget
2020-10-12 23:26 ` [PATCH 1/3] test-lib: allow selecting tests by substring/regex with --run Elijah Newren via GitGitGadget
2020-10-13 15:39   ` Taylor Blau
2020-10-13 17:23     ` Elijah Newren
2020-10-13 17:28       ` Taylor Blau
2020-10-13 18:21         ` Elijah Newren
2020-10-12 23:26 ` [PATCH 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-12 23:26 ` [PATCH 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-13 15:44   ` Taylor Blau
2020-10-13 17:56     ` Elijah Newren
2020-10-13 19:27       ` Junio C Hamano
2020-10-13 13:08 ` [PATCH 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Phillip Wood
2020-10-15 11:48   ` Johannes Schindelin
2020-10-15 13:42     ` Phillip Wood
2020-10-13 19:19 ` [PATCH v2 " Elijah Newren via GitGitGadget
2020-10-13 19:19   ` [PATCH v2 1/3] test-lib: allow selecting tests by substring/regex with --run Elijah Newren via GitGitGadget
2020-10-14 17:04     ` Jeff King
2020-10-14 17:46       ` Junio C Hamano
2020-10-14 18:07         ` Jeff King
2020-10-14 19:24           ` Junio C Hamano
2020-10-14 19:41             ` Elijah Newren
2020-10-14 19:49               ` Jeff King
2020-10-15 16:09                 ` Junio C Hamano
2020-10-15 15:59               ` Junio C Hamano
2020-10-14 17:50       ` Elijah Newren
2020-10-14 17:57         ` Junio C Hamano
2020-10-14 19:12           ` Elijah Newren
2020-10-15 16:10             ` Junio C Hamano
2020-10-14 18:09         ` Jeff King
2020-10-14 19:02           ` Elijah Newren
2020-10-15 16:20       ` Junio C Hamano
2020-10-15 19:46         ` Jeff King
2020-10-15 20:08           ` Junio C Hamano
2020-10-16  0:38             ` Jeff King
2020-10-16 16:16               ` Junio C Hamano
2020-10-16 16:30                 ` Junio C Hamano
2020-10-16 20:06                 ` Jeff King
2020-10-16 20:22                   ` Junio C Hamano
2020-10-13 19:19   ` [PATCH v2 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-13 19:19   ` [PATCH v2 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-14 16:53     ` Jeff King [this message]
2020-10-14 17:39       ` Elijah Newren
2020-10-14 17:55         ` Jeff King
2020-10-14 17:57           ` Elijah Newren
2020-10-13 19:49   ` [PATCH v2 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Taylor Blau
2020-10-14 21:13   ` [PATCH v3 " Elijah Newren via GitGitGadget
2020-10-14 21:13     ` [PATCH v3 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 11:40       ` Phillip Wood
2020-10-16 17:27         ` Elijah Newren
2020-10-16 18:24           ` Phillip Wood
2020-10-16 20:02           ` Junio C Hamano
2020-10-16 20:07             ` Jeff King
2020-10-14 21:13     ` [PATCH v3 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-14 21:13     ` [PATCH v3 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-15 19:48     ` [PATCH v3 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Jeff King
2020-10-16 19:28     ` [PATCH v4 " Elijah Newren via GitGitGadget
2020-10-16 19:28       ` [PATCH v4 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 19:28       ` [PATCH v4 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-16 19:28       ` [PATCH v4 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-16 20:25       ` [PATCH v4 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Junio C Hamano
2020-10-16 20:56         ` Elijah Newren
2020-10-16 22:50       ` [PATCH v5 " Elijah Newren via GitGitGadget
2020-10-16 22:50         ` [PATCH v5 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-16 23:25           ` Andrei Rybak
2020-10-17 23:43             ` Elijah Newren
2020-10-16 22:50         ` [PATCH v5 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-16 22:50         ` [PATCH v5 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget
2020-10-18  0:23         ` [PATCH v6 0/3] Make test selection easier by specifying description substrings instead of just numeric counters Elijah Newren via GitGitGadget
2020-10-18  0:23           ` [PATCH v6 1/3] test-lib: allow selecting tests by substring/glob with --run Elijah Newren via GitGitGadget
2020-10-18  0:23           ` [PATCH v6 2/3] t6006, t6012: adjust tests to use 'setup' instead of synonyms Elijah Newren via GitGitGadget
2020-10-18  0:23           ` [PATCH v6 3/3] test-lib: reduce verbosity of skipped tests Elijah Newren via GitGitGadget

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201014165329.GA21687@coredump.intra.peff.net \
    --to=peff@peff.net \
    --cc=git@vger.kernel.org \
    --cc=gitgitgadget@gmail.com \
    --cc=me@ttaylorr.com \
    --cc=newren@gmail.com \
    --cc=phillip.wood123@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Git Mailing List Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/git/0 git/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 git git/ https://lore.kernel.org/git \
		git@vger.kernel.org
	public-inbox-index git

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.git


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git