From: Ian Jackson <email@example.com> To: Jeff King <firstname.lastname@example.org> Cc: "Ævar Arnfjörð Bjarmason" <email@example.com>, "Linus Torvalds" <firstname.lastname@example.org>, "brian m. carlson" <email@example.com>, "Jason Cooper" <firstname.lastname@example.org>, ankostis <email@example.com>, "Junio C Hamano" <firstname.lastname@example.org>, "Git Mailing List" <email@example.com>, "Stefan Beller" <firstname.lastname@example.org>, "David Lang" <email@example.com>, "Joey Hess" <firstname.lastname@example.org> Subject: Transition plan for git to move to a new hash function Date: Mon, 27 Feb 2017 13:00:01 +0000 Message-ID: <email@example.com> (raw) In-Reply-To: <firstname.lastname@example.org> I said I was working on a transition plan. Here it is. This is obviously a draft for review, and I have no official status in the git project. But I have extensive experience of protocol compatibility engineering, and I hope this will be helpful. Ian. Subject: Transition plan for git to move to a new hash function BASIC PRINCIPLES ================ We run multiple hashes in parallel. Each object is named by exactly one hash. We define that objects with identical content, but named by different hash functions, are different objects. Objects of one hash may refer to objects named by a different hash function to their own. Preference rules arrange that normally, new hash objects refer to other new hash objects. The intention is that for most projects, the existing SHA-1 based history will be retained and a new history built on top of it. (Rewriting is also possible but means a per-project hard switch.) We extend the textual object name syntax to explicitly name the hash used. Every program that invokes git or speaks git protocols will need to understand the extended object name syntax. Packfiles need to be extended to be able to contain objects named by new hash functions. Blob objects with identical contents but named by different hash functions would ideally share storage. Safety catches preferent accidental incorporation into a project of incompatibly-new objects, or additional deprecatedly-old objects. This allows for incremental deployment. TEXTUAL SYNTAX ============== The object name textual syntax is extended. The new syntax may be used in all textual git objects and protocols (commits, tags, command lines, etc.). We declare that the object name syntax is henceforth [A-Z]+[0-9a-z]+ | [0-9a-f]+ and that names [A-Z].* are deprecated as ref name components. Rationale: Full backwards compatibility (ie, without updating any software that calls git) is impossible, because the hash function needs to be evident in the name, so the new names must be disjoint from all old SHA-1 names. We want a short but extensible syntax. The syntax should impose minimal extra requirements on existing git users. In most contexts where existing git users use hashes, ASCII alphanumeric object names will fit. Use of punctuation such as : or even _ may give trouble to existing users, who are already using such things as delimiters. In existing deployments, refnames that differ only in case are generally avoided (because they are troublesome on case-insensitive filesystems). And conventionally refnames are lower case. So names starting with an upper case letter will be disjoint from most existing ref name components. (Note that there is no need to write the uppercase letter to a filename in the object store; the object store can use a different naming scheme.) Even though we probably want to keep using hex, it is a good idea to reserve the flexibility to use a more compact encoding, while not excessively widening the existing permissible character set. Object names using SHA-1 are represented, in text, as at present. Object names starting with uppercase ASCII letters H or later refer to new hash functions. Programs that use `g<objectname>' should ideally be changed to show `H<hash>' for hash function `H' rather than `gH<hash>'.) Rationale: Object names starting with A-F might look like hex. G is reserved because of the way that many programs write `g<objectname>'. This gives us 19 new hash function values until we have to starting using two-letter hash function prefixes, or decide to use A-F after all. New hash names my be abbreviated, by truncation (just like old hashes). The hash function indicator letter must be retained. Initially we define and assign one new hash function (and textual object name encoding): H<hex> where <hex> is the BLAKE2b hash of the object (in lowercase) Note: If the git project prefers a different new hash function to BLAKE2b, that's fine. This proposal can even cope with two new hash functions in parallel. One could even choose on a per-project basis, or switch back and forth. It would also be possible to define a multihash object name, where the full object name is the concatenation of two different hash function values. One of the hashes would have to be preferred for use when a truncated object name is provided by the human user. We also reserve the following syntax for private experiments: E[A-Z]+[0-9a-z]+ We declare that public releases of git will never accept such object names. Everywhere in the git object formats and git protocols, a new object name (with hash function indicator) is permitted where an old object name is permitted. A single object may refer to other objects the hash function which names the object itself, or by other hash functions, in any combination. During git operations, hash function namespace boundaries in the object graph are traversed freely. Two additional restrictions: a tree object may be referenced only by objects named by the same hash function as the tree object itself; and, a tree object may reference only blobs named by the same hash function. IMPLEMENTATION REQUIREMENTS =========================== The object store will need to store objects named by new hashes, alongside SHA-1 objects. In binary protocols, where a SHA-1 object name in binary form was previously used, a new codepoint must be allocated in a containing structure (eg a new typecode). Usually, the new-format binary object will have a new typecode and also an additional name hash indicator, and it may also need a length field (as new hashes may be of different lengths). Whenever a new hash function textual syntax is defined, corresponding binary format codepoint(s) are assigned. Implementation details such as the binary format and protocol specifications, object store layout, and so on, are outside the scope of this transition plan. WHILE WE ARE HERE ================= We should audit the git data formats for inextensible parsers. That will make future changes (for whatever purpose) much less painful. Specific instances I'm aware of: * Permit commits and tags to contain unexpected header lines. Ie, lines matching /^\w+\ / before the first blank like, where the keyword is not recognised. These should be ignored. * The signed push certificate format may need reviewing to check that there is space for extension. The test suite should contain tests of these extension possibilities. A registry (a la IANA) should be created for the extensible namespaces (eg of header keywords). Since new objects can be received and understood only by new software, anyway, it will be safe to insert extension info whenever we generate objects named by new hash functions. CHOICE OF HASH FUNCTION ======================= Whenever objects are created, it is necessary to choose the hash function which will be used to name it. Hash functions are partially ordered, from `older' to `newer' (implicitly, from worse to better). The ordering is configurable. For details of the defaults, see _Transition Plan_. Each ref has, optionally, a hash function hint associated with it. Ie, a dropping in .git which names a particular hash function, with the intent that the next objects made for that ref ought to use the specified hash function. Commits ------- A commit is made (by default) as new as the newest of (i) each of its parents (ii) if applicable, the hash function hint for the ref to which the new commit is to be written Implicitly this normally means that if HEAD refers to a new commit, further new commits will be generated on top of it. The hash function naming an origin commit is controlled by the hint left in .git for the ref named by HEAD (or for HEAD itself, if HEAD is detached) by git checkout --orphan or git init. At boundaries between old and new history, new commit(s) will refer to old parent(s). Tags ---- A tag is created (by default) to by named by the same hash function as the object to which it refers. Trees ----- Trees are only referenced by objects named by the same hash function as the tree. To satisfy this rule, occasionally a tree object named by one hash must be recursively rewritten into an equivalent tree named by another hash. When a tree refers to a commit (ie, a gitlink), it may refer to a commit named by a different hash function. Trees generated so that they can be referred to by the index, are named by the hash function which would name the next commit to be made on HEAD (see `Commits', above) Rationale: we want to avoid new commits and tags relying on weak hashes. But we should avoid demanding that commits be rewritten. Blobs ---- Blobs are normally referred to by trees. Trees always refer to blobs named by the tree's own hash function. Where a blob is created in other circumstances, the caller should specify the hash function. Ref hints --------- As noted above, each ref may also have a hash function hint associated with it. The hint records an intent to switch hash function. The hash hint is (by default) copied, when the ref value is copied. So for exmple if `git checkout foo' makes refs/heads/foo out of refs/remotes/origin/foo, it will copy the hash hint (or lack of one) from refs/remotes/origin/foo. Likewise, the hash hint is conveyed by `git fetch' (by default) and can be updated with `git push' (though this is not done by default). The ref hash hint may be set explicitly. That is how an individual branch is upgraded. git checkout --orphan sets it to the hash which names (or the hint of) the previous HEAD. When a commit is made and stored in a ref, the hash hint for that ref is removed iff hash naming the commit's is the same as the the hint. CONFIGURATION - OBJECT STORE BEHAVIOUR ====================================== The object store has configuration to specify which hash functions are enabled. Each hash function H has a combination of the following behaviours, according to configuration: * Collision behaviour: What to do if we encounter an object we already have (eg as part of a pack, or with hash-object) but with different contents. (a) fail: print a scary message and abort operation (on the basis that either (i) the source of the colliding object probably intended the preimage that they provided, in which case proceeding using our own version is wrong, or (ii) the source is conducting (or unwittingly facilitating) an attack). (b) tolerate: prefer our own data; print a message, but treat the reference as referring to our version of the object. In both cases we keep a copy of the second preimage in our .git, for forensic purposes. Rationale: This is used as part of a gradual desupport strategy. Existing history in all existing object stores is safe and cannot be corrupted or modified by receiving colliding objects. New trees which receive their initial data from a trustworthy sender over a trustworthy channel will receive correct data. Bad object stores or untrustworthy channels could exploit collisions, but not in new regions of the history which are presumably using new names. So even with untrustworthy distribution channels, the collisons can only affect archaeology. Merging previously-unrelated histories does introduce a collision hazard, but the collision would have had to have been introduced while the colliding hash function was still a live hash function in at least one of the two projects. * Hash function enablement: Each hash function is in one of the following states: (a) enabled: this hash function is good and available for use (b) deprecated (in favour of H2): this hash function is available for use, but newly created objects will use another hash function instead (specifically, when creating an object, this has function is not considered as a candidate; if as a result there are no candidate hash functions, we use the specified replacement H2). Existing refs referring to objects with this hash, with no ref hint, are treated as having a ref hint specifying H2. If no H2 is specified, the newest hash is used. (c) disabled: existing objects using this hash function can be accessed, but no such objects can be created or received. (again, a replacement may be specified). This is used both initially to prevent unintended upgrade, and later to block the introduction of vulnerable data generated by badly configured clients. * Preference ordering: As mentioned in `CHOICE OF HASH FUNCTION', there is a configured order on hash functions. This order should be consistent with the enablement configuration. Details of precise configuration option names are beyond the scope of this document. Remote protocol --------------- During protocol negotation, a receiver needs to specify what hashes it understands, and whether it is prepared to see only a partial view. When the sender is listing its refs, refs naming objects the receiver cannot understand are either elided (if the receiver is content with a partial view), or cause an error. Equality testing ---------------- Note that semantically identical trees (and blobs) may (now) have different tree objects because those tree objects might use (and be named by) different hashes. So (in some contexts at least) tree comparison cannot any longer be done by comparing object names; rather an invocation of git diff is needed, or explicit generation of a tree object named by the right hash. TRANSITION PLAN =============== For brevity I will write `SHA' for hashing with SHA-1, using current unqualified object names, and `BLAKE' for hasing with BLAKE2b, using H<hex> object names. Y<n> means `Year <n> after the start of the transition'. Please adjust timescales to taste. I will focus on the default configuration as shipped by git upstream, and the recommended configuration for hosting providers. Individual projects, and perhaps individual hosting providers, can make their own choices, if they are willing to set appropriate configuration (on clients, and servers). Y0: Implement all of the above. Test it. Default configuration: SHA is enabled BLAKE is disabled in trees without working trees BLAKE is enabled in trees with working trees SHA > BLAKE Effects: Clients are prepared to process BLAKE data, but it is not generated by default and cannot be pushed to servers. All old git clients still work. Early adopters can start using the new hashes, at the cost of compatibility. Projects that want to rewrite history right away can do so. (In both cases, by setting configuration options.) Y4: BLAKE by default for new projects. Conversion enabled for existing projects. Old git software is going to start rotting. Default configuration change: BLAKE > SHA BLAKE enabled (even in trees without working trees) Suggested multi-project hosting site configuration change: Newly created projects should get BLAKE enabled Existing projects should retain BLAKE disabled by default Button should be provided to start conversion (see below) Effects: When creating a new working tree, it starts using BLAKE. Servers which have been updated will accept BLAKE. Servers which have not been updated to Y4's git will need a small configuration change (enabling BLAKE) to cope with the new projects that are using BLAKE. To convert a project, an administrator (or project owner) would set BLAKE to enabled, and SHA to deprecated, on the server(s). On the next pull the server will provide ref hints naming BLAKE, which will get copied to the client's HEAD. So the client is infected with BLAKE. To convert a project branch-by-branch, the administrator would set BLAKE to enabled but leave SHA enabled. Then each branch retains its own hash. A branch can be converted by pushing a BLAKE commit to it, or by setting a ref hint on the server (or on the next client to push). Y6: BLAKE by default for all projects Existing projects start being converted infectiously. It is hard for a project to stop this happening if any of their servers are updated. Old git software is firmly stuffed. Default configuration change SHA deprecated in trees without working trees Effects: Existing projects are, by default, `converted', as described above. Y8: Clients hate SHA Clients insist on trying to convert existing projects It is very hard to stop this happening. Unrepentant servers start being very hard to use. Default configuration change SHA deprecated (even in trees without working trees) Effects: Clients will generate only BLAKE. Hopefully their server will accept this! Y10: Stop accepting new SHA No-one can manage to make new SHA commits Default configuration change SHA disabled in new trees, except during initial `clone', `mirror' and similar Effects: Existing SHA history is retained, and copied to new clients and servers. But established clients and servers reject any newly introduced SHA. -- Ian Jackson <email@example.com> These opinions are my own. If I emailed you from an address @fyvzl.net or @evade.org.uk, that is a private address which bypasses my fierce spamfilter.
next prev parent reply index Thread overview: 133+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-02-23 16:43 SHA1 collisions found Joey Hess 2017-02-23 17:00 ` David Lang 2017-02-23 17:02 ` Junio C Hamano 2017-02-23 17:12 ` David Lang 2017-02-23 20:49 ` Jakub Narębski 2017-02-23 20:57 ` Jeff King 2017-02-23 17:18 ` Junio C Hamano 2017-02-23 17:35 ` Joey Hess 2017-02-23 17:52 ` Linus Torvalds 2017-02-23 18:21 ` Joey Hess 2017-02-23 18:31 ` Joey Hess 2017-02-23 19:13 ` Morten Welinder 2017-02-24 15:52 ` Geert Uytterhoeven 2017-02-23 18:40 ` Linus Torvalds 2017-02-23 18:46 ` Jeff King 2017-02-23 19:09 ` Linus Torvalds 2017-02-23 19:32 ` Jeff King 2017-02-23 19:47 ` Linus Torvalds 2017-02-23 19:57 ` Jeff King [not found] ` <alpine.LFD.firstname.lastname@example.org> 2017-02-23 22:43 ` Jeff King 2017-02-23 22:50 ` Linus Torvalds 2017-02-23 23:05 ` Jeff King 2017-02-23 23:05 ` [PATCH 1/3] add collision-detecting sha1 implementation Jeff King 2017-02-23 23:15 ` Stefan Beller 2017-02-24 0:01 ` Jeff King 2017-02-24 0:12 ` Linus Torvalds 2017-02-24 0:16 ` Jeff King 2017-02-23 23:05 ` [PATCH 2/3] sha1dc: adjust header includes for git Jeff King 2017-02-23 23:06 ` [PATCH 3/3] Makefile: add USE_SHA1DC knob Jeff King 2017-02-24 18:36 ` HW42 2017-02-24 18:57 ` Jeff King 2017-02-23 23:14 ` SHA1 collisions found Linus Torvalds 2017-02-28 18:41 ` Junio C Hamano 2017-02-28 19:07 ` Junio C Hamano 2017-02-28 19:20 ` Jeff King 2017-03-01 8:57 ` Dan Shumow 2017-02-28 19:34 ` Linus Torvalds 2017-02-28 19:52 ` Shawn Pearce 2017-02-28 22:56 ` Linus Torvalds 2017-02-28 21:22 ` Dan Shumow 2017-02-28 22:50 ` Marc Stevens 2017-02-28 23:11 ` Linus Torvalds 2017-03-01 19:05 ` Jeff King 2017-02-23 20:47 ` Øyvind A. Holm 2017-02-23 20:46 ` Joey Hess 2017-02-23 18:42 ` Jeff King 2017-02-23 17:52 ` David Lang 2017-02-23 19:20 ` David Lang 2017-02-23 17:19 ` Linus Torvalds 2017-02-23 17:29 ` Linus Torvalds 2017-02-23 18:10 ` Joey Hess 2017-02-23 18:29 ` Linus Torvalds 2017-02-23 18:38 ` Junio C Hamano 2017-02-24 9:42 ` Duy Nguyen 2017-02-25 19:04 ` brian m. carlson 2017-02-27 13:29 ` René Scharfe 2017-02-28 13:25 ` brian m. carlson 2017-02-24 15:13 ` Ian Jackson 2017-02-24 17:04 ` ankostis 2017-02-24 17:23 ` Jason Cooper 2017-02-25 23:22 ` ankostis 2017-02-24 17:32 ` Junio C Hamano 2017-02-24 17:45 ` David Lang 2017-02-24 18:14 ` Junio C Hamano 2017-02-24 18:58 ` Stefan Beller 2017-02-24 19:20 ` Junio C Hamano 2017-02-24 20:05 ` ankostis 2017-02-24 20:32 ` Junio C Hamano 2017-02-25 0:31 ` ankostis 2017-02-26 0:16 ` Jason Cooper 2017-02-26 17:38 ` brian m. carlson 2017-02-26 19:11 ` Linus Torvalds 2017-02-26 21:38 ` Ævar Arnfjörð Bjarmason 2017-02-26 21:52 ` Jeff King 2017-02-27 13:00 ` Ian Jackson [this message] 2017-02-27 14:37 ` Why BLAKE2? Markus Trippelsdorf 2017-02-27 15:42 ` Ian Jackson 2017-02-27 19:26 ` Transition plan for git to move to a new hash function Tony Finch 2017-02-28 21:47 ` brian m. carlson 2017-03-02 18:13 ` Ian Jackson 2017-03-04 22:49 ` brian m. carlson 2017-03-05 13:45 ` Ian Jackson 2017-03-05 23:45 ` brian m. carlson 2017-02-24 20:05 ` SHA1 collisions found Junio C Hamano 2017-02-24 20:33 ` Philip Oakley 2017-02-24 23:39 ` Jeff King 2017-02-25 0:39 ` Linus Torvalds 2017-02-25 0:54 ` Linus Torvalds 2017-02-25 6:10 ` Junio C Hamano 2017-02-26 1:13 ` Jason Cooper 2017-02-26 5:18 ` Jeff King 2017-02-26 18:30 ` brian m. carlson 2017-03-02 21:46 ` Brandon Williams 2017-03-03 11:13 ` Jeff King 2017-03-03 14:54 ` Ian Jackson 2017-03-03 22:18 ` Jeff King 2017-03-02 19:55 ` Linus Torvalds 2017-03-02 20:43 ` Junio C Hamano 2017-03-02 21:21 ` Linus Torvalds 2017-03-02 21:54 ` Joey Hess 2017-03-02 22:27 ` Linus Torvalds 2017-03-03 1:50 ` Mike Hommey 2017-03-03 2:19 ` Linus Torvalds 2017-03-03 11:04 ` Jeff King 2017-03-03 21:47 ` Stefan Beller 2017-02-25 1:00 ` David Lang 2017-02-25 1:15 ` Stefan Beller 2017-02-25 1:21 ` Jeff King 2017-02-25 1:39 ` David Lang 2017-02-25 1:47 ` Jeff King 2017-02-25 1:56 ` David Lang 2017-02-25 2:28 ` Jacob Keller 2017-02-25 2:26 ` Jacob Keller 2017-02-25 5:39 ` grarpamp 2017-02-24 23:43 ` Ian Jackson 2017-02-25 0:06 ` Ian Jackson 2017-02-25 18:50 ` brian m. carlson 2017-02-25 19:26 ` Jeff King 2017-02-25 22:09 ` Mike Hommey 2017-02-26 17:38 ` brian m. carlson 2017-02-24 22:47 ` Jakub Narębski 2017-02-24 22:53 ` Santiago Torres 2017-02-24 23:05 ` Jakub Narębski 2017-02-24 23:24 ` Øyvind A. Holm 2017-02-24 23:06 ` Jeff King 2017-02-24 23:35 ` Jakub Narębski 2017-02-25 22:35 ` Lars Schneider 2017-02-26 0:46 ` Jeff King 2017-02-26 18:22 ` Junio C Hamano 2017-02-26 18:57 ` Thomas Braun 2017-02-26 21:30 ` Jeff King 2017-02-27 9:57 ` Geert Uytterhoeven 2017-02-27 10:43 ` Jeff King 2017-02-27 12:39 ` Morten Welinder 2017-02-25 1:16 Jeff King 2017-02-26 18:55 ` Junio C Hamano
Reply instructions: You may reply publically to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Mailing List Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/git/0 git/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 git git/ https://lore.kernel.org/git \ firstname.lastname@example.org public-inbox-index git Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.git AGPL code for this site: git clone https://public-inbox.org/public-inbox.git