From: Derrick Stolee <stolee@gmail.com>
To: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Derrick Stolee via GitGitGadget" <gitgitgadget@gmail.com>
Cc: git@vger.kernel.org, Junio C Hamano <gitster@pobox.com>
Subject: Re: [PATCH v2 0/6] Use generation numbers for --topo-order
Date: Fri, 21 Sep 2018 11:47:45 -0400 [thread overview]
Message-ID: <2d72ae31-774e-d0a4-8b6c-ea125377eac5@gmail.com> (raw)
In-Reply-To: <87worjjq6o.fsf@evledraar.gmail.com>
On 9/18/2018 2:05 AM, Ævar Arnfjörð Bjarmason wrote:
> On Tue, Sep 18 2018, Derrick Stolee via GitGitGadget wrote:
>
> Thanks. Good to see the commit graph used for more stuff.
>
>> On the Linux repository, I got the following performance results when
>> comparing to the previous version with or without a commit-graph:
>>
>> Test: git rev-list --topo-order -100 HEAD
>> HEAD~1, no commit-graph: 6.80 s
>> HEAD~1, w/ commit-graph: 0.77 s
>> HEAD, w/ commit-graph: 0.02 s
>>
>> Test: git rev-list --topo-order -100 HEAD -- tools
>> HEAD~1, no commit-graph: 9.63 s
>> HEAD~1, w/ commit-graph: 6.06 s
>> HEAD, w/ commit-graph: 0.06 s
> It would be great if this were made into a t/perf/ test shipped with
> this series, that would be later quoted in a commit, as in
> e.g. 3b41fb0cb2 ("fsck: use oidset instead of oid_array for skipList",
> 2018-09-03).
>
> Although generalizing that "-- tools" part (i.e. finding a candidate
> dir) will require some heuristic, but would make it useful when running
> this against other erpos.
t/perf/p4211-line-log.sh has the following test:
test_perf 'git log --oneline --raw --parents -1000' '
git log --oneline --raw --parents -1000 >/dev/null
'
We could add the following to the end of that script to get similar
values, since it already selects a file randomly at the top of the script:
test_perf 'git log --oneline --raw --parents -1000 -- <file>' '
git log --oneline --raw --parents -1000 -- $file >/dev/null
'
>
>> If you want to read this series but are unfamiliar with the commit-graph and
>> generation numbers, then I recommend reading
>> Documentation/technical/commit-graph.txt or a blob post [1] I wrote on the
>> subject. In particular, the three-part walk described in "revision.c:
>> refactor basic topo-order logic" is present (but underexplained) as an
>> animated PNG [2].
> We discussed some of this in private E-Mail, and this isn't really
> feedback on *this* series in particular, just on the general
> commit-graph work.
>
> Right now git-config(1) just matter-of-factly says how to enable it, and
> points to git-commit-graph(1) for further info, which just shows how to
> run the tool. But nothing's describing what stuff is sped up, and those
> sorts of docs aren't being updated as new optimizations (e.g. this
> --topo-order walk) are added.
>
> For that you need to scour a combination of your blogpost & commits in
> git.git (with quoted perf numbers).
Thanks for reminding me. I have this on my list of TODOs.
-Stolee
next prev parent reply other threads:[~2018-09-21 15:47 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-27 20:41 [PATCH 0/6] Use generation numbers for --topo-order Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 1/6] prio-queue: add 'peek' operation Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 2/6] test-reach: add run_three_modes method Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 3/6] test-reach: add rev-list tests Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 4/6] revision.c: begin refactoring --topo-order logic Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 5/6] commit/revisions: bookkeeping before refactoring Derrick Stolee via GitGitGadget
2018-08-27 20:41 ` [PATCH 6/6] revision.c: refactor basic topo-order logic Derrick Stolee via GitGitGadget
2018-08-27 21:23 ` [PATCH 0/6] Use generation numbers for --topo-order Junio C Hamano
2018-09-18 4:08 ` [PATCH v2 " Derrick Stolee via GitGitGadget
2018-09-18 4:08 ` [PATCH v2 1/6] prio-queue: add 'peek' operation Derrick Stolee via GitGitGadget
2018-09-18 4:08 ` [PATCH v2 2/6] test-reach: add run_three_modes method Derrick Stolee via GitGitGadget
2018-09-18 18:02 ` SZEDER Gábor
2018-09-19 19:31 ` Junio C Hamano
2018-09-19 19:38 ` Junio C Hamano
2018-09-20 21:18 ` Junio C Hamano
2018-09-18 4:08 ` [PATCH v2 3/6] test-reach: add rev-list tests Derrick Stolee via GitGitGadget
2018-09-18 4:08 ` [PATCH v2 4/6] revision.c: begin refactoring --topo-order logic Derrick Stolee via GitGitGadget
2018-09-18 4:08 ` [PATCH v2 5/6] commit/revisions: bookkeeping before refactoring Derrick Stolee via GitGitGadget
2018-09-18 4:08 ` [PATCH v2 6/6] revision.c: refactor basic topo-order logic Derrick Stolee via GitGitGadget
2018-09-18 5:51 ` Ævar Arnfjörð Bjarmason
2018-09-18 6:05 ` [PATCH v2 0/6] Use generation numbers for --topo-order Ævar Arnfjörð Bjarmason
2018-09-21 15:47 ` Derrick Stolee [this message]
2018-09-21 17:39 ` [PATCH v3 0/7] " Derrick Stolee via GitGitGadget
2018-09-21 17:39 ` [PATCH v3 1/7] prio-queue: add 'peek' operation Derrick Stolee via GitGitGadget
2018-09-26 19:15 ` Derrick Stolee
2018-10-11 13:54 ` Jeff King
2018-09-21 17:39 ` [PATCH v3 2/7] test-reach: add run_three_modes method Derrick Stolee via GitGitGadget
2018-10-11 13:57 ` Jeff King
2018-09-21 17:39 ` [PATCH v3 3/7] test-reach: add rev-list tests Derrick Stolee via GitGitGadget
2018-10-11 13:58 ` Jeff King
2018-10-12 4:34 ` Junio C Hamano
2018-09-21 17:39 ` [PATCH v3 4/7] revision.c: begin refactoring --topo-order logic Derrick Stolee via GitGitGadget
2018-10-11 14:06 ` Jeff King
2018-10-12 6:33 ` Junio C Hamano
2018-10-12 12:32 ` Derrick Stolee
2018-10-12 16:15 ` Johannes Sixt
2018-10-13 8:05 ` Junio C Hamano
2018-09-21 17:39 ` [PATCH v3 5/7] commit/revisions: bookkeeping before refactoring Derrick Stolee via GitGitGadget
2018-10-11 14:21 ` Jeff King
2018-09-21 17:39 ` [PATCH v3 6/7] revision.h: add whitespace in flag definitions Derrick Stolee via GitGitGadget
2018-09-21 17:39 ` [PATCH v3 7/7] revision.c: refactor basic topo-order logic Derrick Stolee via GitGitGadget
2018-09-27 17:57 ` Derrick Stolee
2018-10-06 16:56 ` Jakub Narebski
2018-10-11 15:35 ` Jeff King
2018-10-11 16:21 ` Derrick Stolee
2018-10-25 9:43 ` Jeff King
2018-10-25 13:00 ` Derrick Stolee
2018-10-11 22:32 ` Stefan Beller
2018-09-21 21:22 ` [PATCH v3 0/7] Use generation numbers for --topo-order Junio C Hamano
2018-10-16 22:36 ` [PATCH v4 " Derrick Stolee via GitGitGadget
2018-10-16 22:36 ` [PATCH v4 1/7] prio-queue: add 'peek' operation Derrick Stolee via GitGitGadget
2018-10-16 22:36 ` [PATCH v4 2/7] test-reach: add run_three_modes method Derrick Stolee via GitGitGadget
2018-10-16 22:36 ` [PATCH v4 3/7] test-reach: add rev-list tests Derrick Stolee via GitGitGadget
2018-10-21 10:21 ` Jakub Narebski
2018-10-21 15:28 ` Derrick Stolee
2018-10-16 22:36 ` [PATCH v4 4/7] revision.c: begin refactoring --topo-order logic Derrick Stolee via GitGitGadget
2018-10-21 15:55 ` Jakub Narebski
2018-10-22 1:12 ` Junio C Hamano
2018-10-22 1:51 ` Derrick Stolee
2018-10-22 1:55 ` [RFC PATCH] revision.c: use new algorithm in A..B case Derrick Stolee
2018-10-25 8:28 ` [PATCH v4 4/7] revision.c: begin refactoring --topo-order logic Junio C Hamano
2018-10-26 20:56 ` Jakub Narebski
2018-10-16 22:36 ` [PATCH v4 5/7] commit/revisions: bookkeeping before refactoring Derrick Stolee via GitGitGadget
2018-10-21 21:17 ` Jakub Narebski
2018-10-16 22:36 ` [PATCH v4 6/7] revision.c: generation-based topo-order algorithm Derrick Stolee via GitGitGadget
2018-10-22 13:37 ` Jakub Narebski
2018-10-23 13:54 ` Derrick Stolee
2018-10-26 16:55 ` Jakub Narebski
2018-10-16 22:36 ` [PATCH v4 7/7] t6012: make rev-list tests more interesting Derrick Stolee via GitGitGadget
2018-10-23 15:48 ` Jakub Narebski
2018-10-21 12:57 ` [PATCH v4 0/7] Use generation numbers for --topo-order Jakub Narebski
2018-11-01 5:21 ` Junio C Hamano
2018-11-01 13:49 ` Derrick Stolee
2018-11-01 23:54 ` Junio C Hamano
2018-11-01 13:46 ` [PATCH v5 " Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 1/7] prio-queue: add 'peek' operation Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 2/7] test-reach: add run_three_modes method Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 3/7] test-reach: add rev-list tests Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 4/7] revision.c: begin refactoring --topo-order logic Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 5/7] commit/revisions: bookkeeping before refactoring Derrick Stolee
2018-11-01 13:46 ` [PATCH v5 6/7] revision.c: generation-based topo-order algorithm Derrick Stolee
2018-11-01 15:48 ` SZEDER Gábor
2018-11-01 16:12 ` Derrick Stolee
2019-11-08 2:50 ` Mike Hommey
2019-11-11 1:07 ` Derrick Stolee
2019-11-18 23:04 ` SZEDER Gábor
2018-11-01 13:46 ` [PATCH v5 7/7] t6012: make rev-list tests more interesting Derrick Stolee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d72ae31-774e-d0a4-8b6c-ea125377eac5@gmail.com \
--to=stolee@gmail.com \
--cc=avarab@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitgitgadget@gmail.com \
--cc=gitster@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).