git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Victoria Dye via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: derrickstolee@github.com, Victoria Dye <vdye@github.com>,
	Victoria Dye <vdye@github.com>
Subject: [PATCH 1/5] reset: revise index refresh advice
Date: Sat, 12 Mar 2022 00:08:45 +0000	[thread overview]
Message-ID: <7206ef8dd8ab088feab841c5574d486b6f19af5e.1647043729.git.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.1170.git.1647043729.gitgitgadget@gmail.com>

From: Victoria Dye <vdye@github.com>

Update the advice describing index refresh from "enumerate unstaged changes"
to "refresh the index." Describing 'refresh_index(...)' as "enumerating
unstaged changes" is not fully representative of what an index refresh is
doing; more generally, it updates the properties of index entries that are
affected by outside-of-index state, e.g. CE_UPTODATE, which is affected by
the file contents on-disk. This distinction is relevant to operations that
read the index but do not refresh first - e.g., 'git read-tree' - where a
stale index may cause incorrect behavior.

In addition to changing the advice message, use the "advise" function to
print advice.

Signed-off-by: Victoria Dye <vdye@github.com>
---
 Documentation/config/advice.txt | 4 ++--
 builtin/reset.c                 | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt
index c40eb09cb7e..971aad2f237 100644
--- a/Documentation/config/advice.txt
+++ b/Documentation/config/advice.txt
@@ -69,8 +69,8 @@ advice.*::
 		merge to avoid overwriting local changes.
 	resetQuiet::
 		Advice to consider using the `--quiet` option to linkgit:git-reset[1]
-		when the command takes more than 2 seconds to enumerate unstaged
-		changes after reset.
+		when the command takes more than 2 seconds to refresh the index
+		after reset.
 	resolveConflict::
 		Advice shown by various commands when conflicts
 		prevent the operation from being performed.
diff --git a/builtin/reset.c b/builtin/reset.c
index 6e65e90c5db..a420497a14f 100644
--- a/builtin/reset.c
+++ b/builtin/reset.c
@@ -525,9 +525,9 @@ int cmd_reset(int argc, const char **argv, const char *prefix)
 					      _("Unstaged changes after reset:"));
 				t_delta_in_ms = (getnanotime() - t_begin) / 1000000;
 				if (advice_enabled(ADVICE_RESET_QUIET_WARNING) && t_delta_in_ms > REFRESH_INDEX_DELAY_WARNING_IN_MS) {
-					printf(_("\nIt took %.2f seconds to enumerate unstaged changes after reset.  You can\n"
+					advise(_("It took %.2f seconds to refresh the index after reset.  You can\n"
 						"use '--quiet' to avoid this.  Set the config setting reset.quiet to true\n"
-						"to make this the default.\n"), t_delta_in_ms / 1000.0);
+						"to make this the default."), t_delta_in_ms / 1000.0);
 				}
 			}
 		} else {
-- 
gitgitgadget


  reply	other threads:[~2022-03-12  0:08 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-12  0:08 [PATCH 0/5] Separate '--skip-refresh' from '--quiet' in 'reset', use '--quiet' internally in 'stash' Victoria Dye via GitGitGadget
2022-03-12  0:08 ` Victoria Dye via GitGitGadget [this message]
2022-03-12  0:08 ` [PATCH 2/5] reset: introduce --[no-]refresh option to --mixed Victoria Dye via GitGitGadget
2022-03-14 15:05   ` Derrick Stolee
2022-03-14 15:13     ` Derrick Stolee
2022-03-14 15:55     ` Victoria Dye
2022-03-12  0:08 ` [PATCH 3/5] reset: replace '--quiet' with '--no-refresh' in performance advice Victoria Dye via GitGitGadget
2022-03-12  0:08 ` [PATCH 4/5] reset: suppress '--no-refresh' advice if logging is silenced Victoria Dye via GitGitGadget
2022-03-12  0:08 ` [PATCH 5/5] stash: make internal resets quiet and refresh index Victoria Dye via GitGitGadget
2022-03-14 15:10   ` Derrick Stolee
2022-03-14 15:56     ` Victoria Dye
2022-03-12 17:12 ` [PATCH 0/5] Separate '--skip-refresh' from '--quiet' in 'reset', use '--quiet' internally in 'stash' Victoria Dye
2022-03-14  6:22 ` Junio C Hamano
2022-03-14 15:13 ` Derrick Stolee
2022-03-14 16:10 ` [PATCH v2 0/5] Allow 'reset --quiet' to refresh the index, use 'reset --quiet' " Victoria Dye via GitGitGadget
2022-03-14 16:10   ` [PATCH v2 1/5] reset: revise index refresh advice Victoria Dye via GitGitGadget
2022-03-14 16:10   ` [PATCH v2 2/5] reset: introduce --[no-]refresh option to --mixed Victoria Dye via GitGitGadget
2022-03-14 19:27     ` Junio C Hamano
2022-03-14 23:48       ` Victoria Dye
2022-03-14 16:10   ` [PATCH v2 3/5] reset: replace '--quiet' with '--no-refresh' in performance advice Victoria Dye via GitGitGadget
2022-03-14 16:10   ` [PATCH v2 4/5] reset: suppress '--no-refresh' advice if logging is silenced Victoria Dye via GitGitGadget
2022-03-14 19:38     ` Junio C Hamano
2022-03-14 16:10   ` [PATCH v2 5/5] stash: make internal resets quiet and refresh index Victoria Dye via GitGitGadget
2022-03-14 19:42     ` Junio C Hamano
2022-03-14 23:54       ` Victoria Dye
2022-03-14 16:30   ` [PATCH v2 0/5] Allow 'reset --quiet' to refresh the index, use 'reset --quiet' in 'stash' Derrick Stolee
2022-03-14 23:17   ` Junio C Hamano
2022-03-15  1:49   ` [PATCH v3 " Victoria Dye via GitGitGadget
2022-03-15  1:49     ` [PATCH v3 1/5] reset: revise index refresh advice Victoria Dye via GitGitGadget
2022-03-15  1:49     ` [PATCH v3 2/5] reset: introduce --[no-]refresh option to --mixed Victoria Dye via GitGitGadget
2022-03-18 11:08       ` Phillip Wood
2022-03-18 17:17         ` Junio C Hamano
2022-03-18 19:19           ` Victoria Dye
2022-03-15  1:49     ` [PATCH v3 3/5] reset: replace '--quiet' with '--no-refresh' in performance advice Victoria Dye via GitGitGadget
2022-03-15  1:49     ` [PATCH v3 4/5] reset: suppress '--no-refresh' advice if logging is silenced Victoria Dye via GitGitGadget
2022-03-15  1:49     ` [PATCH v3 5/5] stash: make internal resets quiet and refresh index Victoria Dye via GitGitGadget
2022-03-15 10:23       ` Junio C Hamano
2022-03-16 20:07         ` Victoria Dye
2022-03-16 20:55           ` Junio C Hamano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7206ef8dd8ab088feab841c5574d486b6f19af5e.1647043729.git.gitgitgadget@gmail.com \
    --to=gitgitgadget@gmail.com \
    --cc=derrickstolee@github.com \
    --cc=git@vger.kernel.org \
    --cc=vdye@github.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).