From: Elijah Newren <newren@gmail.com>
To: Lessley Dennington <lessleydennington@gmail.com>
Cc: Elijah Newren via GitGitGadget <gitgitgadget@gmail.com>,
Git Mailing List <git@vger.kernel.org>,
Derrick Stolee <stolee@gmail.com>, Victoria Dye <vdye@github.com>
Subject: Re: [PATCH 4/6] git-sparse-checkout.txt: update to document that set handles init
Date: Tue, 7 Dec 2021 13:13:56 -0800 [thread overview]
Message-ID: <CABPp-BH1nb0XBgNbLLrmbtoK6UfJHgeTwQvDPVn2RcaUKddNzA@mail.gmail.com> (raw)
In-Reply-To: <7c2a8b0e-a387-1166-ea02-e5792537aefa@gmail.com>
On Tue, Dec 7, 2021 at 12:42 PM Lessley Dennington
<lessleydennington@gmail.com> wrote:
>
> On 12/4/21 12:00 PM, Elijah Newren via GitGitGadget wrote:
> > From: Elijah Newren <newren@gmail.com>
> >
...
> > ++
> > +Historically, `set` did not used to handle all the necessary config
> > +settings, which meant that both `init` and `set` had to be called.
> > +Invoking both meant the `init` step would first remove nearly all
> > +tracked files (and in cone mode, ignored files too), then the `set`
> > +step would add many of the tracked files (but not ignored files) back.
> > +In addition to the lost files, the performance and UI of this
> > +combination was poor.
> > ++
> Super nit: Perhaps update '`set` did not used to handle' to '`set` did not
> handle'.
Yeah, that sounds better. I'll wait a bit longer for other comments,
then send a fix for this along with any other needed fixes (even if
just included Acks & Reviewed-bys I get). Thanks!
next prev parent reply other threads:[~2021-12-07 21:14 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-04 20:00 [PATCH 0/6] sparse-checkout: make set subsume init Elijah Newren via GitGitGadget
2021-12-04 20:00 ` [PATCH 1/6] sparse-checkout: pass use_stdin as a parameter instead of as a global Elijah Newren via GitGitGadget
2021-12-04 20:00 ` [PATCH 2/6] sparse-checkout: break apart functions for sparse_checkout_(set|add) Elijah Newren via GitGitGadget
2021-12-04 20:00 ` [PATCH 3/6] sparse-checkout: enable `set` to initialize sparse-checkout mode Elijah Newren via GitGitGadget
2021-12-04 21:40 ` Victoria Dye
2021-12-07 17:04 ` Elijah Newren
2021-12-07 20:36 ` Lessley Dennington
2021-12-07 16:42 ` Derrick Stolee
2021-12-07 18:18 ` Elijah Newren
2021-12-04 20:00 ` [PATCH 4/6] git-sparse-checkout.txt: update to document that set handles init Elijah Newren via GitGitGadget
2021-12-04 21:48 ` Victoria Dye
2021-12-07 16:45 ` Derrick Stolee
2021-12-07 17:06 ` Elijah Newren
2021-12-07 20:42 ` Lessley Dennington
2021-12-07 21:13 ` Elijah Newren [this message]
2021-12-07 22:36 ` Lessley Dennington
2021-12-04 20:00 ` [PATCH 5/6] Documentation: clarify/correct a few sparsity related statements Elijah Newren via GitGitGadget
2021-12-04 20:00 ` [PATCH 6/6] clone: avoid using deprecated `sparse-checkout init` Elijah Newren via GitGitGadget
2021-12-07 16:48 ` [PATCH 0/6] sparse-checkout: make set subsume init Derrick Stolee
2021-12-07 20:20 ` [PATCH v2 00/10] " Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 01/10] sparse-checkout: pass use_stdin as a parameter instead of as a global Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 02/10] sparse-checkout: break apart functions for sparse_checkout_(set|add) Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 03/10] sparse-checkout: add sanity-checks on initial sparsity state Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 04/10] sparse-checkout: disallow --no-stdin as an argument to set Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 05/10] sparse-checkout: split out code for tweaking settings config Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 06/10] sparse-checkout: enable `set` to initialize sparse-checkout mode Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 07/10] sparse-checkout: enable reapply to take --[no-]{cone,sparse-index} Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 08/10] git-sparse-checkout.txt: update to document init/set/reapply changes Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 09/10] Documentation: clarify/correct a few sparsity related statements Elijah Newren via GitGitGadget
2021-12-07 20:20 ` [PATCH v2 10/10] clone: avoid using deprecated `sparse-checkout init` Elijah Newren via GitGitGadget
2021-12-07 21:05 ` [PATCH v2 00/10] sparse-checkout: make set subsume init Derrick Stolee
2021-12-08 14:16 ` Victoria Dye
2021-12-10 3:56 ` [PATCH v3 " Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 01/10] sparse-checkout: pass use_stdin as a parameter instead of as a global Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 02/10] sparse-checkout: break apart functions for sparse_checkout_(set|add) Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 03/10] sparse-checkout: add sanity-checks on initial sparsity state Elijah Newren via GitGitGadget
2021-12-13 18:11 ` Junio C Hamano
2021-12-14 2:25 ` Elijah Newren
2021-12-10 3:56 ` [PATCH v3 04/10] sparse-checkout: disallow --no-stdin as an argument to set Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 05/10] sparse-checkout: split out code for tweaking settings config Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 06/10] sparse-checkout: enable `set` to initialize sparse-checkout mode Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 07/10] sparse-checkout: enable reapply to take --[no-]{cone,sparse-index} Elijah Newren via GitGitGadget
2021-12-13 18:23 ` Junio C Hamano
2021-12-14 2:39 ` Elijah Newren
2021-12-10 3:56 ` [PATCH v3 08/10] git-sparse-checkout.txt: update to document init/set/reapply changes Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 09/10] Documentation: clarify/correct a few sparsity related statements Elijah Newren via GitGitGadget
2021-12-10 3:56 ` [PATCH v3 10/10] clone: avoid using deprecated `sparse-checkout init` Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 00/10] sparse-checkout: make set subsume init Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 01/10] sparse-checkout: pass use_stdin as a parameter instead of as a global Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 02/10] sparse-checkout: break apart functions for sparse_checkout_(set|add) Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 03/10] sparse-checkout: add sanity-checks on initial sparsity state Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 04/10] sparse-checkout: disallow --no-stdin as an argument to set Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 05/10] sparse-checkout: split out code for tweaking settings config Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 06/10] sparse-checkout: enable `set` to initialize sparse-checkout mode Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 07/10] sparse-checkout: enable reapply to take --[no-]{cone,sparse-index} Elijah Newren via GitGitGadget
2021-12-23 0:47 ` Jiang Xin
2021-12-23 17:09 ` Elijah Newren
2021-12-23 19:09 ` Junio C Hamano
2021-12-14 4:09 ` [PATCH v4 08/10] git-sparse-checkout.txt: update to document init/set/reapply changes Elijah Newren via GitGitGadget
2021-12-14 4:09 ` [PATCH v4 09/10] Documentation: clarify/correct a few sparsity related statements Elijah Newren via GitGitGadget
2021-12-14 7:38 ` Bagas Sanjaya
2021-12-14 7:48 ` Elijah Newren
2021-12-14 4:09 ` [PATCH v4 10/10] clone: avoid using deprecated `sparse-checkout init` Elijah Newren via GitGitGadget
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABPp-BH1nb0XBgNbLLrmbtoK6UfJHgeTwQvDPVn2RcaUKddNzA@mail.gmail.com \
--to=newren@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitgitgadget@gmail.com \
--cc=lessleydennington@gmail.com \
--cc=stolee@gmail.com \
--cc=vdye@github.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).