git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Elijah Newren <newren@gmail.com>
To: Denton Liu <liu.denton@gmail.com>
Cc: Elijah Newren via GitGitGadget <gitgitgadget@gmail.com>,
	Git Mailing List <git@vger.kernel.org>,
	Johannes Schindelin <Johannes.Schindelin@gmx.de>,
	Phillip Wood <phillip.wood@dunelm.org.uk>,
	Junio C Hamano <gitster@pobox.com>,
	Pavel Roskin <plroskin@gmail.com>
Subject: Re: [PATCH 06/15] t3432: make these tests work with either am or merge backends
Date: Mon, 23 Dec 2019 09:17:22 -0800	[thread overview]
Message-ID: <CABPp-BHXZHaQk--6=8-BBLqmCeRrLXYXRRru_gbVKUUdGAWqXQ@mail.gmail.com> (raw)
In-Reply-To: <20191222051106.GA28890@generichostname>

On Sat, Dec 21, 2019 at 9:11 PM Denton Liu <liu.denton@gmail.com> wrote:
>
> Hi Elijah,
>
> On Fri, Dec 20, 2019 at 05:09:39PM +0000, Elijah Newren via GitGitGadget wrote:
> > diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh
> > index 92f95b57da..3879a43fa0 100755
> > --- a/t/t3432-rebase-fast-forward.sh
> > +++ b/t/t3432-rebase-fast-forward.sh
> > @@ -44,19 +44,16 @@ test_rebase_same_head_ () {
> >       test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" "
> >               oldhead=\$(git rev-parse HEAD) &&
> >               test_when_finished 'git reset --hard \$oldhead' &&
> > +             cp .git/logs/HEAD expect &&
> >               git rebase$flag $* >stdout &&
> >               if test $what = work
> >               then
> > -                     # Must check this case first, for 'is up to
> > -                     # date, rebase forced[...]rewinding head' cases
> > -                     test_i18ngrep 'rewinding head' stdout
> > +                     wc -l .git/logs/HEAD >old &&
> > +                     wc -l .git/logs/HEAD >new &&
>
> Are the above two lines some yet-to-be cleaned up leftovers? I can't see
> where `old` and `new` are being used elsewhere.

Um, this whole section is broken and causes it to pass the test for
stupid reasons.  Not sure how I bungled that so badly.  I'll send a
re-roll with a corrected 6/15.

>
> > +                     test_line_count '-gt' $(($old + 2)) .git/logs/HEAD
> >               elif test $what = noop
> >               then
> > -                     test_i18ngrep 'is up to date' stdout &&
> > -                     test_i18ngrep ! 'rebase forced' stdout
> > -             elif test $what = noop-force
> > -             then
> > -                     test_i18ngrep 'is up to date, rebase forced' stdout
> > +                     test_cmp expect .git/logs/HEAD
> >               fi &&
> >               newhead=\$(git rev-parse HEAD) &&
> >               if test $cmp = same

  reply	other threads:[~2019-12-23 17:17 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-20 17:09 [PATCH 00/15] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2019-12-20 21:29   ` Junio C Hamano
2019-12-21  0:32     ` Elijah Newren
2019-12-21 18:52       ` Elijah Newren
2019-12-21 23:49       ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-20 21:34   ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-20 21:37   ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-22  5:11   ` Denton Liu
2019-12-23 17:17     ` Elijah Newren [this message]
2019-12-20 17:09 ` [PATCH 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 11/15] contrib: change the prompt for am-based rebases Elijah Newren via GitGitGadget
2019-12-20 23:07   ` SZEDER Gábor
2019-12-21  0:17     ` Elijah Newren
2019-12-20 17:09 ` [PATCH 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2019-12-20 18:51 ` [PATCH 00/15] rebase: make the default backend configurable Alban Gruin
2019-12-20 18:55   ` Elijah Newren
2019-12-23 18:49 ` [PATCH v2 " Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 11/15] contrib: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2019-12-23 22:00     ` Denton Liu
2019-12-23 18:49   ` [PATCH v2 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-23 18:49   ` [PATCH v2 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2019-12-24 19:54   ` [PATCH v3 00/15] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2020-01-07 14:37       ` Phillip Wood
2020-01-07 19:15         ` Elijah Newren
2020-01-08 14:27           ` Phillip Wood
2020-01-09 21:32             ` Johannes Schindelin
2019-12-24 19:54     ` [PATCH v3 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2020-01-07 14:43       ` Phillip Wood
2020-01-07 19:26         ` Elijah Newren
2020-01-07 20:11           ` Junio C Hamano
2020-01-08 14:32             ` Phillip Wood
2020-01-08 17:18               ` Junio C Hamano
2020-01-08 18:55                 ` Phillip Wood
2019-12-24 19:54     ` [PATCH v3 11/15] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-24 19:54     ` [PATCH v3 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-01-10 23:14       ` Jonathan Nieder
2020-01-11  1:16         ` Elijah Newren
2020-01-11 14:41           ` Phillip Wood
2020-01-12 17:59             ` Johannes Schindelin
2020-01-16  6:32               ` Elijah Newren
2020-01-16  7:58                 ` Jonathan Nieder
2020-01-16  8:06                   ` Jonathan Nieder
2020-01-16 16:18                     ` Elijah Newren
2020-01-16 20:35                       ` Jonathan Nieder
2020-01-16 21:30                         ` Elijah Newren
2020-01-16 22:39                           ` Jonathan Nieder
2020-01-16 23:19                             ` Elijah Newren
2020-01-16 23:25                           ` Junio C Hamano
2020-01-17  0:51                             ` Elijah Newren
2020-01-16 15:35                   ` Elijah Newren
2020-01-16 20:05                   ` Junio C Hamano
2020-01-16 10:48                 ` Johannes Schindelin
2020-01-12 21:23             ` Junio C Hamano
2020-01-15 19:50             ` Jonathan Nieder
2020-01-15 21:59               ` Emily Shaffer
2020-01-16  6:14     ` [PATCH v4 00/19] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 01/19] git-rebase.txt: update description of --allow-empty-message Elijah Newren via GitGitGadget
2020-02-09 15:59         ` Phillip Wood
2020-02-13 18:35           ` Elijah Newren
2020-01-16  6:14       ` [PATCH v4 02/19] t3404: directly test the behavior of interest Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 03/19] rebase (interactive-backend): make --keep-empty the default Elijah Newren via GitGitGadget
2020-02-09 15:59         ` Phillip Wood
2020-02-13 18:52           ` Elijah Newren
2020-01-16  6:14       ` [PATCH v4 04/19] rebase (interactive-backend): fix handling of commits that become empty Elijah Newren via GitGitGadget
2020-02-10 14:27         ` Phillip Wood
2020-02-13 18:54           ` Elijah Newren
2020-02-16 14:46             ` Phillip Wood
2020-01-16  6:14       ` [PATCH v4 05/19] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 06/19] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 07/19] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 08/19] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 09/19] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 10/19] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 11/19] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 12/19] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 13/19] rebase: add an --am option Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 14/19] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 15/19] rebase: drop '-i' from the reflog " Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 16/19] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 17/19] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 18/19] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2020-01-16  6:14       ` [PATCH v4 19/19] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-01-17 16:58       ` [PATCH v4 00/19] rebase: make the default backend configurable Phillip Wood
2020-02-05 21:06         ` Junio C Hamano
2020-02-05 22:38           ` Elijah Newren
2020-02-15 21:36       ` [PATCH v5 00/20] rebase: make the default backend configurable and change the default Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 01/20] git-rebase.txt: update description of --allow-empty-message Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 02/20] t3404: directly test the behavior of interest Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 03/20] rebase (interactive-backend): make --keep-empty the default Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 04/20] rebase (interactive-backend): fix handling of commits that become empty Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 05/20] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 06/20] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 07/20] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 08/20] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 09/20] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 10/20] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 11/20] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 12/20] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 13/20] rebase: add an --am option Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 14/20] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 15/20] rebase: drop '-i' from the reflog " Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 16/20] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 17/20] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 18/20] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 19/20] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-02-15 21:36         ` [PATCH v5 20/20] rebase: rename the two primary rebase backends Elijah Newren via GitGitGadget
2020-03-12 15:13           ` Emily Shaffer
2020-03-12 16:33             ` Elijah Newren
2020-03-12 17:55               ` Jonathan Nieder
2020-03-12 18:39                 ` Elijah Newren
2020-03-12 18:46                   ` Jonathan Nieder
2020-03-12 19:31                     ` Elijah Newren
2020-03-17  2:58                       ` Jonathan Nieder
2020-03-17  4:45                         ` Elijah Newren
2020-03-12 19:54                     ` Junio C Hamano
2020-03-12 19:07               ` Junio C Hamano
2020-03-12 19:12                 ` Jonathan Nieder
2020-03-12 19:12               ` Junio C Hamano
2020-03-12 19:29                 ` Elijah Newren
2020-03-12 20:37                   ` Jeff King
2020-03-12 21:27                     ` Junio C Hamano
2020-03-12 22:06                       ` Elijah Newren
2020-03-13  0:04                         ` Junio C Hamano
2020-03-12 23:30                       ` Jonathan Nieder
2020-02-16 15:01         ` [PATCH v5 00/20] rebase: make the default backend configurable and change the default Phillip Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CABPp-BHXZHaQk--6=8-BBLqmCeRrLXYXRRru_gbVKUUdGAWqXQ@mail.gmail.com' \
    --to=newren@gmail.com \
    --cc=Johannes.Schindelin@gmx.de \
    --cc=git@vger.kernel.org \
    --cc=gitgitgadget@gmail.com \
    --cc=gitster@pobox.com \
    --cc=liu.denton@gmail.com \
    --cc=phillip.wood@dunelm.org.uk \
    --cc=plroskin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).