From: Elijah Newren <newren@gmail.com>
To: Derrick Stolee via GitGitGadget <gitgitgadget@gmail.com>
Cc: Git Mailing List <git@vger.kernel.org>,
Derrick Stolee <stolee@gmail.com>,
Eric Sunshine <sunshine@sunshineco.com>,
Sean Allred <allred.sean@gmail.com>,
Junio C Hamano <gitster@pobox.com>,
Derrick Stolee <derrickstolee@github.com>,
Derrick Stolee <dstolee@microsoft.com>
Subject: Re: [PATCH v4 5/5] worktree: copy sparse-checkout patterns and config on add
Date: Wed, 26 Jan 2022 23:09:36 -0800 [thread overview]
Message-ID: <CABPp-BHog9yoqC+M=L6y3uBfmfPOTdhy=hErwBozhbqL_yQ+-g@mail.gmail.com> (raw)
In-Reply-To: <bb9e550ff3d6c1432aa1d1d07d747e7e085216e8.1643136134.git.gitgitgadget@gmail.com>
On Tue, Jan 25, 2022 at 10:42 AM Derrick Stolee via GitGitGadget
<gitgitgadget@gmail.com> wrote:
>
> From: Derrick Stolee <dstolee@microsoft.com>
>
> When adding a new worktree, it is reasonable to expect that we want to
> use the current set of sparse-checkout settings for that new worktree.
> This is particularly important for repositories where the worktree would
> become too large to be useful. This is even more important when using
> partial clone as well, since we want to avoid downloading the missing
> blobs for files that should not be written to the new worktree.
>
> The only way to create such a worktree without this intermediate step of
> expanding the full worktree is to copy the sparse-checkout patterns and
> config settings during 'git worktree add'. Each worktree has its own
> sparse-checkout patterns, and the default behavior when the
> sparse-checkout file is missing is to include all paths at HEAD. Thus,
> we need to have patterns from somewhere, they might as well be the
> current worktree's patterns. These are then modified independently in
> the future.
>
> In addition to the sparse-checkout file, copy the worktree config file
> if worktree config is enabled and the file exists. This will copy over
> any important settings to ensure the new worktree behaves the same as
> the current one. The only exception we must continue to make is that
> core.bare and core.worktree should become unset in the worktree's config
> file.
>
> Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
> ---
> builtin/worktree.c | 60 ++++++++++++++++++++++++++++++
> t/t1091-sparse-checkout-builtin.sh | 31 +++++++++++----
> t/t2400-worktree-add.sh | 46 ++++++++++++++++++++++-
> 3 files changed, 127 insertions(+), 10 deletions(-)
>
> diff --git a/builtin/worktree.c b/builtin/worktree.c
> index 2838254f7f2..dc9cd6decc8 100644
> --- a/builtin/worktree.c
> +++ b/builtin/worktree.c
> @@ -335,6 +335,66 @@ static int add_worktree(const char *path, const char *refname,
> strbuf_addf(&sb, "%s/commondir", sb_repo.buf);
> write_file(sb.buf, "../..");
>
> + /*
> + * If the current worktree has sparse-checkout enabled, then copy
> + * the sparse-checkout patterns from the current worktree.
> + */
> + if (core_apply_sparse_checkout) {
> + char *from_file = git_pathdup("info/sparse-checkout");
> + char *to_file = xstrfmt("%s/worktrees/%s/info/sparse-checkout",
> + realpath.buf, name);
> +
> + if (file_exists(from_file)) {
> + if (safe_create_leading_directories(to_file) ||
> + copy_file(to_file, from_file, 0666))
> + error(_("failed to copy '%s' to '%s'; sparse-checkout may not work correctly"),
> + from_file, to_file);
> + }
> +
> + free(from_file);
> + free(to_file);
> + }
> +
> + /*
> + * If we are using worktree config, then copy all current config
> + * values from the current worktree into the new one, that way the
> + * new worktree behaves the same as this one.
> + */
> + if (repository_format_worktree_config) {
> + char *from_file = git_pathdup("config.worktree");
> + char *to_file = xstrfmt("%s/worktrees/%s/config.worktree",
> + realpath.buf, name);
> +
> + if (file_exists(from_file)) {
> + struct config_set cs = { { 0 }};
> + const char *str_value;
> + int bool_value;
> +
> + if (safe_create_leading_directories(to_file) ||
> + copy_file(to_file, from_file, 0666))
> + die(_("failed to copy worktree config from '%s' to '%s'"),
> + from_file, to_file);
> +
> + git_configset_init(&cs);
> + git_configset_add_file(&cs, from_file);
> +
> + if (!git_configset_get_bool(&cs, "core.bare", &bool_value) &&
> + bool_value &&
> + git_config_set_multivar_in_file_gently(
> + to_file, "core.bare", NULL, "true", 0))
> + error(_("failed to unset 'core.bare' in '%s'"), to_file);
> + if (!git_configset_get_value(&cs, "core.worktree", &str_value) &&
> + git_config_set_in_file_gently(to_file,
> + "core.worktree", NULL))
> + error(_("failed to unset 'core.worktree' in '%s'"), to_file);
> +
> + git_configset_clear(&cs);
> + }
> +
> + free(from_file);
> + free(to_file);
> + }
> +
> strvec_pushf(&child_env, "%s=%s", GIT_DIR_ENVIRONMENT, sb_git.buf);
> strvec_pushf(&child_env, "%s=%s", GIT_WORK_TREE_ENVIRONMENT, path);
> cp.git_cmd = 1;
> diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh
> index be6ea4ffe33..d929772be96 100755
> --- a/t/t1091-sparse-checkout-builtin.sh
> +++ b/t/t1091-sparse-checkout-builtin.sh
> @@ -146,9 +146,9 @@ test_expect_success 'interaction with clone --no-checkout (unborn index)' '
> '
>
> test_expect_success 'set enables config' '
> - git init empty-config &&
> + git init worktree-config &&
> (
> - cd empty-config &&
> + cd worktree-config &&
> test_commit test file &&
> test_path_is_missing .git/config.worktree &&
> git sparse-checkout set nothing &&
> @@ -201,6 +201,21 @@ test_expect_success 'add to sparse-checkout' '
> check_files repo "a folder1 folder2"
> '
>
> +test_expect_success 'worktree: add copies sparse-checkout patterns' '
> + cat repo/.git/info/sparse-checkout >old &&
> + test_when_finished cp old repo/.git/info/sparse-checkout &&
> + test_when_finished git -C repo worktree remove ../worktree &&
> + git -C repo sparse-checkout set "/*" &&
Could we add --no-cone to tests using that mode in anticipation of
switching the default?
> + git -C repo worktree add --quiet ../worktree 2>err &&
> + test_must_be_empty err &&
> + new=repo/.git/worktrees/worktree/info/sparse-checkout &&
> + test_path_is_file $new &&
> + test_cmp repo/.git/info/sparse-checkout $new &&
> + git -C worktree sparse-checkout set --cone &&
> + test_cmp_config -C worktree true core.sparseCheckoutCone &&
> + test_must_fail git -C repo core.sparseCheckoutCone
> +'
> +
> test_expect_success 'cone mode: match patterns' '
> git -C repo config --worktree core.sparseCheckoutCone true &&
> rm -rf repo/a repo/folder1 repo/folder2 &&
> @@ -520,13 +535,13 @@ test_expect_success 'interaction with submodules' '
> '
>
> test_expect_success 'different sparse-checkouts with worktrees' '
> + git -C repo sparse-checkout set --cone deep folder1 &&
> git -C repo worktree add --detach ../worktree &&
> - check_files worktree "a deep folder1 folder2" &&
> - git -C worktree sparse-checkout init --cone &&
> - git -C repo sparse-checkout set folder1 &&
> - git -C worktree sparse-checkout set deep/deeper1 &&
> - check_files repo a folder1 &&
> - check_files worktree a deep
> + check_files worktree "a deep folder1" &&
> + git -C repo sparse-checkout set --cone folder1 &&
> + git -C worktree sparse-checkout set --cone deep/deeper1 &&
> + check_files repo "a folder1" &&
> + check_files worktree "a deep"
> '
>
> test_expect_success 'set using filename keeps file on-disk' '
> diff --git a/t/t2400-worktree-add.sh b/t/t2400-worktree-add.sh
> index 37ad79470fb..3fb5b21b943 100755
> --- a/t/t2400-worktree-add.sh
> +++ b/t/t2400-worktree-add.sh
> @@ -165,8 +165,50 @@ test_expect_success '"add" default branch of a bare repo' '
> (
> git clone --bare . bare2 &&
> cd bare2 &&
> - git worktree add ../there3 main
> - )
> + git worktree add ../there3 main &&
> + cd ../there3 &&
> + git status
> + ) &&
> + cat >expect <<-EOF &&
> + init.t
> + EOF
> + ls there3 >actual &&
> + test_cmp expect actual
> +'
> +
> +test_expect_success '"add" to bare repo with worktree config' '
> + (
> + git clone --bare . bare3 &&
> + cd bare3 &&
> + git config extensions.worktreeconfig true &&
> + git config --worktree core.bare true &&
> + git config --worktree core.worktree "$(pwd)" &&
> + git config --worktree bogus.key value &&
> + git config --unset core.bare &&
> + git worktree add ../there4 main &&
> + cd ../there4 &&
> + git status &&
> + git worktree add --detach ../there5 &&
> + cd ../there5 &&
> + git status
> + ) &&
> +
> + # the worktree has the arbitrary value copied.
> + test_cmp_config -C there4 value bogus.key &&
> + test_cmp_config -C there5 value bogus.key &&
> +
> + # however, core.bare and core.worktree were removed.
> + test_must_fail git -C there4 config core.bare &&
> + test_must_fail git -C there4 config core.worktree &&
> +
> + cat >expect <<-EOF &&
> + init.t
> + EOF
> +
> + ls there4 >actual &&
> + test_cmp expect actual &&
> + ls there5 >actual &&
> + test_cmp expect actual
> '
>
> test_expect_success 'checkout with grafts' '
> --
> gitgitgadget
This patch is so awesome. Totally looking forward to seeing it
included. I was only able to spot one micro nit.
next prev parent reply other threads:[~2022-01-27 7:09 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 15:57 [PATCH 0/4] Sparse checkout: fix bug with worktree of bare repo Derrick Stolee via GitGitGadget
2021-12-20 15:57 ` [PATCH 1/4] setup: use a repository when upgrading format Derrick Stolee via GitGitGadget
2021-12-20 15:57 ` [PATCH 2/4] config: make some helpers repo-aware Derrick Stolee via GitGitGadget
2021-12-20 15:57 ` [PATCH 3/4] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-20 17:32 ` Derrick Stolee
2021-12-21 0:01 ` Eric Sunshine
2021-12-21 5:59 ` Eric Sunshine
2021-12-21 13:41 ` Derrick Stolee
2021-12-21 5:53 ` Eric Sunshine
2021-12-21 13:45 ` Derrick Stolee
2021-12-21 23:29 ` Eric Sunshine
2021-12-20 15:57 ` [PATCH 4/4] sparse-checkout: use repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-20 16:21 ` [PATCH 0/4] Sparse checkout: fix bug with worktree of bare repo Eric Sunshine
2021-12-20 17:34 ` Derrick Stolee
2021-12-21 6:10 ` Eric Sunshine
2021-12-21 19:14 ` [PATCH v2 0/5] " Derrick Stolee via GitGitGadget
2021-12-21 19:14 ` [PATCH v2 1/5] setup: use a repository when upgrading format Derrick Stolee via GitGitGadget
2021-12-21 19:14 ` [PATCH v2 2/5] config: make some helpers repo-aware Derrick Stolee via GitGitGadget
2021-12-21 19:14 ` [PATCH v2 3/5] worktree: add upgrade_to_worktree_config() Derrick Stolee via GitGitGadget
2021-12-22 0:45 ` Eric Sunshine
2021-12-28 15:03 ` Derrick Stolee
2021-12-28 16:58 ` Eric Sunshine
2021-12-28 17:03 ` Derrick Stolee
2021-12-22 5:38 ` Junio C Hamano
2021-12-28 15:13 ` Derrick Stolee
2021-12-21 19:14 ` [PATCH v2 4/5] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-22 1:11 ` Eric Sunshine
2021-12-21 19:14 ` [PATCH v2 5/5] sparse-checkout: use repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-22 5:48 ` Eric Sunshine
2021-12-22 6:05 ` [PATCH v2 0/5] Sparse checkout: fix bug with worktree of bare repo Eric Sunshine
2021-12-22 22:54 ` Elijah Newren
2021-12-27 7:15 ` Eric Sunshine
2021-12-27 7:34 ` Eric Sunshine
2021-12-27 20:16 ` Elijah Newren
2021-12-28 9:11 ` Eric Sunshine
2021-12-30 6:21 ` Eric Sunshine
2021-12-30 17:40 ` Elijah Newren
2021-12-27 19:35 ` Elijah Newren
2021-12-28 7:33 ` Eric Sunshine
2021-12-28 18:16 ` Elijah Newren
2021-12-30 6:40 ` Eric Sunshine
2021-12-30 18:38 ` Elijah Newren
2022-01-03 6:51 ` Eric Sunshine
2021-12-28 21:32 ` [PATCH v3 0/6] " Derrick Stolee via GitGitGadget
2021-12-28 21:32 ` [PATCH v3 1/6] setup: use a repository when upgrading format Derrick Stolee via GitGitGadget
2021-12-28 21:32 ` [PATCH v3 2/6] config: make some helpers repo-aware Derrick Stolee via GitGitGadget
2021-12-28 21:32 ` [PATCH v3 3/6] worktree: add 'init-worktree-config' subcommand Derrick Stolee via GitGitGadget
2021-12-29 6:48 ` Eric Sunshine
2021-12-30 8:41 ` Eric Sunshine
2021-12-30 17:29 ` Derrick Stolee
2022-01-03 6:38 ` Eric Sunshine
2021-12-28 21:32 ` [PATCH v3 4/6] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-28 21:32 ` [PATCH v3 5/6] sparse-checkout: use repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2021-12-30 9:01 ` Eric Sunshine
2021-12-28 21:32 ` [PATCH v3 6/6] worktree: copy sparse-checkout patterns and config on add Derrick Stolee via GitGitGadget
2021-12-29 6:37 ` Eric Sunshine
2021-12-29 17:31 ` Derrick Stolee
2021-12-29 19:51 ` Elijah Newren
2021-12-29 21:39 ` Derrick Stolee
2021-12-29 22:45 ` Elijah Newren
2021-12-30 8:16 ` Eric Sunshine
2021-12-30 8:01 ` Eric Sunshine
2021-12-29 9:39 ` [PATCH v3 0/6] Sparse checkout: fix bug with worktree of bare repo Elijah Newren
2021-12-29 17:38 ` Derrick Stolee
2021-12-30 7:41 ` Eric Sunshine
2021-12-30 7:40 ` Eric Sunshine
2021-12-30 17:41 ` Derrick Stolee
2021-12-30 19:29 ` Elijah Newren
2022-01-03 7:11 ` Eric Sunshine
2021-12-30 18:46 ` Elijah Newren
2022-01-25 18:42 ` [PATCH v4 0/5] " Derrick Stolee via GitGitGadget
2022-01-25 18:42 ` [PATCH v4 1/5] Documentation: add extensions.worktreeConfig details Derrick Stolee via GitGitGadget
2022-01-26 6:59 ` Bagas Sanjaya
2022-01-27 14:15 ` Derrick Stolee
2022-01-27 6:43 ` Elijah Newren
2022-01-27 14:17 ` Derrick Stolee
2022-01-25 18:42 ` [PATCH v4 2/5] worktree: create init_worktree_config() Derrick Stolee via GitGitGadget
2022-01-27 7:01 ` Elijah Newren
2022-01-25 18:42 ` [PATCH v4 3/5] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2022-01-25 18:42 ` [PATCH v4 4/5] sparse-checkout: set worktree-config correctly Derrick Stolee via GitGitGadget
2022-01-27 7:15 ` Elijah Newren
2022-01-27 14:24 ` Derrick Stolee
2022-01-25 18:42 ` [PATCH v4 5/5] worktree: copy sparse-checkout patterns and config on add Derrick Stolee via GitGitGadget
2022-01-27 7:09 ` Elijah Newren [this message]
2022-01-27 7:20 ` [PATCH v4 0/5] Sparse checkout: fix bug with worktree of bare repo Elijah Newren
2022-01-27 14:29 ` Derrick Stolee
2022-01-31 15:00 ` [PATCH v5 " Derrick Stolee via GitGitGadget
2022-01-31 15:00 ` [PATCH v5 1/5] Documentation: add extensions.worktreeConfig details Derrick Stolee via GitGitGadget
2022-02-06 9:17 ` Eric Sunshine
2022-01-31 15:00 ` [PATCH v5 2/5] worktree: create init_worktree_config() Derrick Stolee via GitGitGadget
2022-02-06 9:32 ` Eric Sunshine
2022-01-31 15:00 ` [PATCH v5 3/5] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2022-01-31 15:00 ` [PATCH v5 4/5] sparse-checkout: set worktree-config correctly Derrick Stolee via GitGitGadget
2022-02-06 10:21 ` Eric Sunshine
2022-01-31 15:00 ` [PATCH v5 5/5] worktree: copy sparse-checkout patterns and config on add Derrick Stolee via GitGitGadget
2022-02-06 10:36 ` Jean-Noël AVILA
2022-02-07 14:10 ` Derrick Stolee
2022-02-09 7:53 ` Jean-Noël Avila
2022-02-09 14:45 ` Derrick Stolee
2022-02-06 11:30 ` Eric Sunshine
2022-02-06 19:36 ` Eric Sunshine
2022-02-07 14:30 ` Derrick Stolee
2022-02-15 22:01 ` Eric Sunshine
2022-02-16 13:58 ` Derrick Stolee
2022-01-31 16:17 ` [PATCH v5 0/5] Sparse checkout: fix bug with worktree of bare repo Elijah Newren
2022-02-07 21:32 ` [PATCH v6 0/6] " Derrick Stolee via GitGitGadget
2022-02-07 21:32 ` [PATCH v6 1/6] Documentation: add extensions.worktreeConfig details Derrick Stolee via GitGitGadget
2022-02-08 22:20 ` Junio C Hamano
2022-02-09 2:34 ` Derrick Stolee
2022-02-09 17:19 ` Junio C Hamano
2022-02-09 17:26 ` Derrick Stolee
2022-02-09 17:51 ` Elijah Newren
2022-02-09 18:40 ` Junio C Hamano
2022-02-15 20:37 ` Eric Sunshine
2022-02-16 1:51 ` Junio C Hamano
2022-02-09 18:04 ` Elijah Newren
2022-02-09 18:41 ` Junio C Hamano
2022-02-07 21:32 ` [PATCH v6 2/6] worktree: create init_worktree_config() Derrick Stolee via GitGitGadget
2022-02-08 22:09 ` Junio C Hamano
2022-02-09 2:21 ` Derrick Stolee
2022-02-09 17:34 ` Junio C Hamano
2022-02-09 16:43 ` Elijah Newren
2022-02-07 21:33 ` [PATCH v6 3/6] config: add repo_config_set_worktree_gently() Derrick Stolee via GitGitGadget
2022-02-08 22:18 ` Junio C Hamano
2022-02-09 2:27 ` Derrick Stolee
2022-02-09 17:49 ` Junio C Hamano
2022-02-10 14:48 ` Derrick Stolee
2022-02-10 16:45 ` Junio C Hamano
2022-02-07 21:33 ` [PATCH v6 4/6] sparse-checkout: set worktree-config correctly Derrick Stolee via GitGitGadget
2022-02-07 21:33 ` [PATCH v6 5/6] worktree: copy sparse-checkout patterns and config on add Derrick Stolee via GitGitGadget
2022-02-15 22:23 ` Eric Sunshine
2022-02-07 21:33 ` [PATCH v6 6/6] config: make git_configset_get_string_tmp() private Derrick Stolee via GitGitGadget
2022-02-08 4:14 ` [PATCH v6 0/6] Sparse checkout: fix bug with worktree of bare repo Elijah Newren
2022-02-08 5:02 ` Eric Sunshine
2022-02-08 5:18 ` Elijah Newren
2022-02-08 5:42 ` Eric Sunshine
2022-02-16 0:56 ` Eric Sunshine
2022-02-08 14:33 ` Derrick Stolee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CABPp-BHog9yoqC+M=L6y3uBfmfPOTdhy=hErwBozhbqL_yQ+-g@mail.gmail.com' \
--to=newren@gmail.com \
--cc=allred.sean@gmail.com \
--cc=derrickstolee@github.com \
--cc=dstolee@microsoft.com \
--cc=git@vger.kernel.org \
--cc=gitgitgadget@gmail.com \
--cc=gitster@pobox.com \
--cc=stolee@gmail.com \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).