From: Bagas Sanjaya <firstname.lastname@example.org> To: Dave Huseby <email@example.com>, firstname.lastname@example.org Cc: email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com Subject: Re: [PATCH v3] doc: writing down Git mailing list etiquette Date: Thu, 13 May 2021 14:01:25 +0700 [thread overview] Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> Another review. On 13/05/21 06.34, Dave Huseby wrote: > After violating a few unspoken etiquette rules while submitting patches > to the Git mailing list, it was suggeted that somebody write a guide. > Since I was the latest cause of this perenial discussion, I took it upon > myself to learn from my mistakes and document the Git mailing list > etiquette and the fixes I made to my email setup. > > * Add documentation specifically on Git mailing list etiquette > * Add alternative actions for patches that receive no response. > * Add section on submitting a final, merge-ready patch. > * Add section on Mutt MUA settings. > > Reported-by: Christian Couder <firstname.lastname@example.org> > Reported-by: Filipe Contreras <email@example.com> > Thanks-to: Junio C Hamano <firstname.lastname@example.org> > Thanks-to: Philip Oakley <email@example.com> > Thanks-to: Bagas Sanjaya <firstname.lastname@example.org> > Thanks-to: Eric Sunshine <email@example.com> > Thanks-to: Ævar Arnfjörð Bjarmason <firstname.lastname@example.org> > Signed-off-by: Dave Huseby <email@example.com> > --- > Documentation/MailingListEtiquette.txt | 93 ++++++++++++++++++++++++++ > Documentation/SubmittingPatches | 74 +++++++++++++++++++- > 2 files changed, 166 insertions(+), 1 deletion(-) > create mode 100644 Documentation/MailingListEtiquette.txt > > diff --git a/Documentation/MailingListEtiquette.txt b/Documentation/MailingListEtiquette.txt > new file mode 100644 > index 0000000000..8a383f81a8 > --- /dev/null > +++ b/Documentation/MailingListEtiquette.txt > @@ -0,0 +1,93 @@ > +Mailing List Etiquette > +====================== > + > +[[introduction]] > +== Introduction > + > +The Git project uses a mailing list and email to coordinate development and > +submit patches. Many other open source projects use web-based forums and pull > +requests (PRs) to achieve the same thing. This article focuses entirely on the > +Git project and the etiquette and unspoken rules that have developed over the > +years. What follows are best practices and suggestions for the "proper" way to > +interact via email on the Git mailing list. > + > +If you are looking for details on how to submit a patch, that is documented > +elsewhere in: > + > +- `Documentation/SubmittingPatches` > +- `Documentation/MyFirstContribution.txt` > + > +[[proper-use-of-to-and-cc]] > +== Proper Use of To and Cc > + > +The "To:" field is the place to list the people you want to directly interact > +with and request responses from and the "Cc:" field is for other people that > +you wish to inform of this conversation. Everybody is welcome to chime in on > +the thread. When there is no particular person you wish to talk to, the mailing > +list address is a good catch-all addres to reach everybody and should be put in > +the "To:" field. > + > +When replying to an email on the mailing list, put the person you are replying > +to in the "To:" field and all other people in the thread in the "Cc:" field, > +including the mailing list address. > + > +The motivation for the above suggestions is to allow recipients to prioritize > +their incoming messages; they can direct their immediate attention to those > +messages with their names on the "To:" field and the ones with their names on > +the "Cc:" field can wait. > + > +Make sure to keep everyone involved in the "Cc:" field so that they do not have > +to be subscribed to the mailing list to receive replies. > + > +[[proper-use-of-subject]] > +== Proper Use of the Subject > + > +When replying to an email on the list, make sure that the subject of the > +original email is the subject of your email with "Re:" added to it. So if > +you reply to an email with subject "first post", the subject of your email > +should be "Re: first post". > + > +Sometimes email threads diverge into other threads about related, but distinct > +topics. In those cases, the subject like should change to the new topic and > +include in parenthesis "(Was: <original thread subject>)". So for instance, > +if a side thread is created from the "first post" thread example, the subject > +line should be something like "second post (was: first post)" with replies > +having the subject "Re: second post (was: first post)". > + > +[[use-interleaved-style]] > +== Use Interleaved Style in Replies > + > +> A: Because it messes up the order in which people normally read text. > +> Q: Why is top-posting such a bad thing? > +> A: Top-posting. > +> Q: What is the most annoying thing in email? > + > +When replying to emails, use interleaved style which is also sometimes called > +an "inline reply". This creates a natural flow for the reader of the reply. They > +can easily see what the context for the reply is. Also leave only the context > +that is important for your reply and delete the rest. > + > +[[do-not-use-mail-followup-to]] > +== Do Not Use Mail-Followup-To > + > +When posting to the mailing list, your email client might add a > +"Mail-Followup-To:" field containing all of the recipients, including the > +mailing list address, but not the sender's email address. This is intended to > +prevent the sender from receiving replies twice, once from the replying person > +and again from the mailing list. > + > +This goes directly against the desired "To:" and "Cc:" etiquette (see "Proper > +Use of To and Cc" above) because "Reply to all"/"group reply" will redirect the > +response to all of the people in the original "Cc:" field instead of going to > +the person who sent the message being responded to. > + > +Some email clients, such as Mutt (see Disable Mail-Followup-To in the Mutt > +section below) are configured by default to add "Mail-Followup-To:" fields and > +to honor existing "Mail-Followup-To:" fields. It is best to disable both. > + > +[[enable-plain-text-mode]] > +== Enable Plain Text Mode > + > +The Git mailing list software rejects email sent in text/html format. It is > +important that your email client is set to create text/plain emails to ensure > +delivery. > diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches > index 55287d72e0..4f8b9f24ee 100644 > --- a/Documentation/SubmittingPatches > +++ b/Documentation/SubmittingPatches > @@ -433,7 +433,7 @@ help you find out who they are. > > In any time between the (2)-(3) cycle, the maintainer may pick it up > from the list and queue it to `seen`, in order to make it easier for > -people play with it without having to pick up and apply the patch to > +people to play with it without having to pick up and apply the patch to > their trees themselves. > > [[patch-status]] > @@ -450,6 +450,46 @@ their trees themselves. > entitled "What's cooking in git.git" and "What's in git.git" giving > the status of various proposed changes. > > +[[patches-that-receive-no-response]] > +== Patches that Receive No Response > + > +If you sent a patch and you did not hear any response from anybody for > +several days, it could be that your patch was totally uninteresting, > +but it also is possible that it was simply lost in the noise. Please > +do not hesitate to send a reminder message in such a case. Messages > +getting lost in the noise may be a sign that those who can evaluate > +your patch don't have enough mental/time bandwidth to process them > +right at the moment, and it often helps to wait until the list traffic > +becomes calmer before sending such a reminder. > + > +Alternatives to sending direct reminders are: > + > +* Wait for the next "What's cooking in git.git" email to see if your patch > + series was mentioned and replying to that email with a note pointing out that > + your patch series has been overlooked. > + > +* Attend the weekly "stand-up" meeting held in the "#git-devel" channel on > + irc.freenode.net and bring it up then. > + > +[[send-merge-ready-patches-to-the-maintainer]] > +== Send Merge-Ready Patches to the Maintainer > + > +Once a patch has achieved consensus and all stakeholders are satisfied and > +everything is ready for merging, you have two main options for getting your > +patch noticed by the maintainer. > + > +1. Submit a new, final, version of the patch with an accurate list of commit > + trailers. Make this submission "To:" the maintainer, "In-Reply-To:" the > + previous version of the patch, and add everybody concerned, including the > + mailing list address to the "Cc:" field. This is a nice way to reduce the > + amount of work the maintainer must do to merge the patch while also getting > + their attention. > + > +2. Creating a "group reply"/"Reply to all" email to the latest patch series > + with the maintainer in the "To:" field. This is sometimes referred to as a > + "review ping" email and is appropriate if the patch requires no more work > + and is in its final state with an accurate list of commit trailers. > + > [[travis]] > == GitHub-Travis CI hints > > @@ -510,6 +550,38 @@ first patch.\n", if you really want to put in the patch e-mail, > should come after the three-dash line that signals the end of the > commit message. > > +=== Mutt > + > +[[known-mailing-lists]] > +==== Known Mailing Lists > + > +Mutt has the ability to change its behavior when replying to a mailing list. You > +must specify mailing list addresses using the `subscribe` keyword in your Mutt > +configuration: > + > +**~/.muttrc:** > +``` > +# tell Mutt about the Git mailing list > +subscribe firstname.lastname@example.org > +``` > + > +[[disable-mail-followup-to]] > +==== Disable Mail-Followup-To > + > +By default, when replying to mailing lists, Mutt automatically generates > +"Mail-Followup-To:" fields. To fix this, disable the generation of the field > +in your Mutt configuration. It is also a good idea to disable honoring any > +"Mail-Followup-To:" field so that your "group reply" operations are correctly > +addressed. > + > +**~/.muttrc:** > +``` > +# disable Mail-Followup-To header > +unset followup_to > + > +# disable honoring Mail-Followup-To header > +unset honor_followup_to > +``` > > === Pine > > I think the patch title, according to diff body, should be "doc: document mailing list etiquette and various updates to SubmittingPatches". But anyway, it's better to split into two separate patches (one that document etiquette and one that add updates to SubmittingPatches) because there are two logical changes in single patch. Regarding patch title, I proposed change above because we require that the title use imperative language ("make something do one thing"). However, you use present continuous tense (with gerund "-ing"), which implied that you do something progressively ("making something do one thing"). This is not imperative language, just descriptive. -- An old man doll... just what I always wanted! - Clara
next prev parent reply other threads:[~2021-05-13 7:01 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-12 2:54 [PATCH v1] Writing down mail " Dave Huseby 2021-05-12 2:57 ` Dave Huseby 2021-05-12 6:25 ` Felipe Contreras 2021-05-12 3:18 ` Dave Huseby 2021-05-12 3:18 ` [PATCH v2] Writing down mail list etiquette Dave Huseby 2021-05-12 4:07 ` Bagas Sanjaya 2021-05-12 6:45 ` Felipe Contreras 2021-05-12 7:35 ` Eric Sunshine 2021-05-12 8:32 ` Felipe Contreras 2021-05-12 14:36 ` Junio C Hamano 2021-05-12 4:46 ` Junio C Hamano 2021-05-12 8:45 ` Ævar Arnfjörð Bjarmason 2021-05-12 23:34 ` [PATCH v3] doc: writing down Git mailing " Dave Huseby 2021-05-13 0:20 ` Junio C Hamano 2021-05-13 17:17 ` Dave Huseby 2021-05-13 20:04 ` Felipe Contreras 2021-05-13 21:11 ` Junio C Hamano 2021-05-13 4:06 ` Bagas Sanjaya 2021-05-13 6:34 ` Felipe Contreras 2021-05-13 7:01 ` Bagas Sanjaya [this message] 2021-06-09 17:36 ` Felipe Contreras 2021-06-18 20:43 ` Dave Huseby 2021-06-18 23:48 ` Felipe Contreras 2021-05-12 15:28 ` and... Re: [PATCH v1] Writing down mail " Philip Oakley 2021-05-12 6:21 ` Felipe Contreras
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [PATCH v3] doc: writing down Git mailing list etiquette' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).