Git Mailing List Archive on lore.kernel.org
 help / color / Atom feed
From: Derrick Stolee <stolee@gmail.com>
To: 85y2m6fhkm.fsf@gmail.com, "Jakub Narębski" <jnareb@gmail.com>
Cc: abhishekkumar8222@gmail.com, git@vger.kernel.org,
	gitgitgadget@gmail.com, me@ttaylorr.com
Subject: Re: [PATCH v3 11/11] doc: add corrected commit date info
Date: Thu, 27 Aug 2020 09:15:56 -0400
Message-ID: <e7bbce30-93a6-b7e2-844b-5f2af4dbddf3@gmail.com> (raw)
In-Reply-To: <20200827063951.GA16268@Abhishek-Arch>

On 8/27/2020 2:39 AM, Abhishek Kumar wrote:
> Thinking about this, I feel creating a new section called "Handling
> Mixed Generation Number Chains" made more sense:
> 
>   ## Handling Mixed Generation Number Chains
> 
>   With the introduction of generation number v2 and generation data chunk,
>   the following scenario is possible:
> 
>   1. "New" Git writes a commit-graph with a GDAT chunk.
>   2. "Old" Git writes a split commit-graph on top without a GDAT chunk.

I like the idea of this section, and this setup is good.

>   The commits in the lower layer will be interpreted as having very large
>   generation values (commit date plus offset) compared to the generation
>   numbers in the top layer (toplogical level). This violates the
>   expectation that the generation of a parent is strictly smaller than the
>   generation of a child. In such cases, we revert to using topological
>   levels for all layers to maintain backwards compatability.

s/toplogical/topological

But also, we don't want to phrase this as "in this case, we do the wrong
thing" but instead

  A naive approach of using the newest available generation number from
  each layer would lead to violated expectations: the lower layer would
  use corrected commit dates which are much larger than the topological
  levels of the higher layer. For this reason, Git inspects each layer
  to see if any layer is missing corrected commit dates. In such a case,
  Git only uses topological levels.

>   When writing a new layer in split commit-graph, we write a GDAT chunk
>   only if the topmost layer has a GDAT chunk. This guarantees that if a
>   lyer has GDAT chunk, all lower layers must have a GDAT chunk as well.

s/lyer/layer

Perhaps leaving this at a higher level than referencing "GDAT chunk" is
advisable. Perhaps use "we write corrected commit dates" or "all lower
layers must store corrected commit dates as well", for example.

>   Rewriting layers follows similar approach: if the topmost layer below
>   set of layers being rewriteen (in the split commit-graph chain) exists,
>   and it does not contain GDAT chunk, then the result of rewrite does not
>   have GDAT chunks either.

This could use more positive language to make it clear that sometimes
we _do_ want to write corrected commit dates when merging layers:

  When merging layers, we do not consider whether the merged layers had
  corrected commit dates. Instead, the new layer will have corrected
  commit dates if and only if all existing layers below the new layer
  have corrected commit dates.

Thanks,
-Stolee

  parent reply index

Thread overview: 129+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  9:13 [PATCH 0/6] [GSoC] Implement Corrected Commit Date Abhishek Kumar via GitGitGadget
2020-07-28  9:13 ` [PATCH 1/6] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-07-28 15:28   ` Taylor Blau
2020-07-30  5:24     ` Abhishek Kumar
2020-08-04  0:46   ` Jakub Narębski
2020-08-04  0:56     ` Taylor Blau
2020-08-04 10:10       ` Jakub Narębski
2020-08-04  7:55     ` Jakub Narębski
2020-07-28  9:13 ` [PATCH 2/6] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-07-28 13:00   ` Derrick Stolee
2020-07-28 15:30     ` Taylor Blau
2020-08-05 23:16   ` Jakub Narębski
2020-07-28  9:13 ` [PATCH 3/6] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-07-28 13:14   ` Derrick Stolee
2020-07-28 15:19     ` René Scharfe
2020-07-28 15:58       ` Derrick Stolee
2020-07-28 16:01     ` Taylor Blau
2020-07-30  6:07     ` Abhishek Kumar
2020-07-28  9:13 ` [PATCH 4/6] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-07-28 16:03   ` Taylor Blau
2020-07-28  9:13 ` [PATCH 5/6] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-07-28 16:12   ` Taylor Blau
2020-07-30  6:52     ` Abhishek Kumar
2020-07-28  9:13 ` [PATCH 6/6] commit-graph: implement corrected commit date offset Abhishek Kumar via GitGitGadget
2020-07-28 15:55   ` Derrick Stolee
2020-07-28 16:23     ` Taylor Blau
2020-07-30  7:27     ` Abhishek Kumar
2020-07-28 14:54 ` [PATCH 0/6] [GSoC] Implement Corrected Commit Date Taylor Blau
2020-07-30  7:47   ` Abhishek Kumar
2020-07-28 16:35 ` Derrick Stolee
2020-08-09  2:53 ` [PATCH v2 00/10] " Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 01/10] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 04/10] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 05/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-10 16:28     ` Derrick Stolee
2020-08-11 11:03       ` Abhishek Kumar
2020-08-11 12:27         ` Derrick Stolee
2020-08-11 18:58           ` Taylor Blau
2020-08-09  2:53   ` [PATCH v2 06/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 07/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-10 14:23     ` Derrick Stolee
2020-08-14  4:59       ` Abhishek Kumar
2020-08-14 12:24         ` Derrick Stolee
2020-08-09  2:53   ` [PATCH v2 08/10] commit-graph: handle mixed generation commit chains Abhishek Kumar via GitGitGadget
2020-08-10 16:42     ` Derrick Stolee
2020-08-11 11:36       ` Abhishek Kumar
2020-08-11 12:43         ` Derrick Stolee
2020-08-09  2:53   ` [PATCH v2 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-10 16:47   ` [PATCH v2 00/10] [GSoC] Implement Corrected Commit Date Derrick Stolee
2020-08-15 16:39   ` [PATCH v3 00/11] " Abhishek Kumar via GitGitGadget
2020-08-15 16:39     ` [PATCH v3 01/11] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-17 22:30       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-18 14:18       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-19 17:54       ` Jakub Narębski
2020-08-21  4:11         ` Abhishek Kumar
2020-08-25 11:11           ` Jakub Narębski
2020-09-01 11:35             ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 04/11] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-17 13:22       ` Derrick Stolee
2020-08-21 11:05       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 05/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-21 13:14       ` Jakub Narębski
2020-08-25  5:04         ` Abhishek Kumar
2020-08-25 12:18           ` Jakub Narębski
2020-09-01 12:06             ` Abhishek Kumar
2020-09-03 13:42               ` Jakub Narębski
2020-09-05 17:21                 ` Abhishek Kumar
2020-09-13 15:39                   ` Jakub Narębski
2020-09-28 21:48                     ` Jakub Narębski
2020-10-05  5:25                       ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 06/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-08-21 18:43       ` Jakub Narębski
2020-08-25  6:14         ` Abhishek Kumar
2020-08-25  7:33           ` Jakub Narębski
2020-08-25  7:56             ` Jakub Narębski
2020-09-01 10:26               ` Abhishek Kumar
2020-09-03  9:25                 ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-22  0:05       ` Jakub Narębski
2020-08-25  6:49         ` Abhishek Kumar
2020-08-25 10:07           ` Jakub Narębski
2020-09-01 11:01             ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-22 13:09       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-08-22 17:14       ` Jakub Narębski
2020-08-26  7:15         ` Abhishek Kumar
2020-08-26 10:38           ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-22 19:09       ` Jakub Narębski
2020-09-01 10:08         ` Abhishek Kumar
2020-09-03 19:11           ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-22 22:20       ` Jakub Narębski
2020-08-27  6:39         ` Abhishek Kumar
2020-08-27 12:43           ` Jakub Narębski
2020-08-27 13:15           ` Derrick Stolee [this message]
2020-09-01 13:01             ` Abhishek Kumar
2020-08-17  0:13     ` [PATCH v3 00/11] [GSoC] Implement Corrected Commit Date Jakub Narębski
     [not found]       ` <CANQwDwdKp7oKy9BeKdvKhwPUiq0R5MS8TCw-eWGCYCoMGv=G-g@mail.gmail.com>
2020-08-17  1:32         ` Fwd: " Taylor Blau
2020-08-17  7:56           ` Jakub Narębski
2020-08-18  6:12       ` Abhishek Kumar
2020-08-23 15:27       ` Jakub Narębski
2020-08-24  2:49         ` Abhishek Kumar
2020-10-07 14:09     ` [PATCH v4 00/10] " Abhishek Kumar via GitGitGadget
2020-10-07 14:09       ` [PATCH v4 01/10] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2020-10-24 23:16         ` Jakub Narębski
2020-10-25 20:58           ` Taylor Blau
2020-10-07 14:09       ` [PATCH v4 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-10-24 23:41         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-10-25 10:52         ` Jakub Narębski
2020-10-27  6:33           ` Abhishek Kumar
2020-10-07 14:09       ` [PATCH v4 04/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-10-25 13:48         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 05/10] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-10-25 22:17         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 06/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-10-27 18:53         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 07/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-10-30 12:45         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 08/10] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-10-07 14:09       ` [PATCH v4 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-10-07 14:09       ` [PATCH v4 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e7bbce30-93a6-b7e2-844b-5f2af4dbddf3@gmail.com \
    --to=stolee@gmail.com \
    --cc=85y2m6fhkm.fsf@gmail.com \
    --cc=abhishekkumar8222@gmail.com \
    --cc=git@vger.kernel.org \
    --cc=gitgitgadget@gmail.com \
    --cc=jnareb@gmail.com \
    --cc=me@ttaylorr.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Git Mailing List Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/git/0 git/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 git git/ https://lore.kernel.org/git \
		git@vger.kernel.org
	public-inbox-index git

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.git


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git