git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Abhishek Kumar via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: "Derrick Stolee" <stolee@gmail.com>,
	"Jakub Narębski" <jnareb@gmail.com>,
	"Abhishek Kumar" <abhishekkumar8222@gmail.com>,
	"SZEDER Gábor" <szeder.dev@gmail.com>,
	"Taylor Blau" <me@ttaylorr.com>,
	"Abhishek Kumar" <abhishekkumar8222@gmail.com>
Subject: [PATCH v7 00/11] [GSoC] Implement Corrected Commit Date
Date: Mon, 01 Feb 2021 06:58:34 +0000	[thread overview]
Message-ID: <pull.676.v7.git.1612162726.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.676.v6.git.1610820679.gitgitgadget@gmail.com>

This patch series implements the corrected commit date offsets as generation
number v2, along with other pre-requisites.

Git uses topological levels in the commit-graph file for commit-graph
traversal operations like 'git log --graph'. Unfortunately, topological
levels can perform worse than committer date when parents of a commit differ
greatly in generation numbers [1]. For example, 'git merge-base v4.8 v4.9'
on the Linux repository walks 635,579 commits using topological levels and
walks 167,468 using committer date. Since 091f4cf3 (commit: don't use
generation numbers if not needed, 2018-08-30), 'git merge-base' uses
committer date heuristic unless there is a cutoff because of the performance
hit.

[1]
https://lore.kernel.org/git/efa3720fb40638e5d61c6130b55e3348d8e4339e.1535633886.git.gitgitgadget@gmail.com/

Thus, the need for generation number v2 was born. As Git used to die when
graph version understood by it and in the commit-graph file are different
[2], we needed a way to distinguish between the old and new generation
number without incrementing the graph version.

[2] https://lore.kernel.org/git/87a7gdspo4.fsf@evledraar.gmail.com/

The following candidates were proposed
(https://github.com/derrickstolee/gen-test,
https://github.com/abhishekkumar2718/git/pull/1):

 * (Epoch, Date) Pairs.
 * Maximum Generation Numbers.
 * Corrected Commit Date.
 * FELINE Index.
 * Corrected Commit Date with Monotonically Increasing Offsets.

Based on performance, local computability, and immutability (along with the
introduction of an additional commit-graph chunk which relieved the
requirement of backwards-compatibility) Corrected Commit Date was chosen as
generation number v2 and is defined as follows:

For a commit C, let its corrected commit date be the maximum of the commit
date of C and the corrected commit dates of its parents plus 1. Then
corrected commit date offset is the difference between corrected commit date
of C and commit date of C. As a special case, a root commit with the
timestamp zero has corrected commit date of 1 to distinguish it from
GENERATION_NUMBER_ZERO (that is, an uncomputed generation number).

While it was proposed initially to store corrected commit date offsets
within Commit Data Chunk, storing the offsets in a new chunk did not affect
the performance measurably. The new chunk is "Generation DATa (GDAT) chunk"
and it stores corrected commit date offsets while CDAT chunk stores
topological level. The old versions of Git would ignore GDAT chunk, using
topological levels from CDAT chunk. In contrast, new versions of Git would
use corrected commit dates, falling back to topological level if the
generation data chunk is absent in the commit-graph file.

While storing corrected commit date offsets saves us 4 bytes per commit (as
compared with storing corrected commit dates directly), it's however
possible for the offset to overflow the space allocated. To handle such
cases, we introduce a new chunk, Generation Data Overflow (GDOV) that stores
the corrected commit date. For overflowing offsets, we set MSB and store the
position into the GDOV chunk, in a mechanism similar to the Extra Edges list
chunk.

For mixed generation number environment (for example new Git on the command
line, old Git used by GUI client), we can encounter a mixed-chain
commit-graph (a commit-graph chain where some of split commit-graph files
have GDAT chunk and others do not). As backward compatibility is one of the
goals, we can define the following behavior:

While reading a mixed-chain commit-graph version, we fall back on
topological levels as corrected commit dates and topological levels cannot
be compared directly.

When adding new layer to the split commit-graph file, and when merging some
or all layers (replacing them in the latter case), the new layer will have
GDAT chunk if and only if in the final result there would be no layer
without GDAT chunk just below it.

Thanks to Dr. Stolee, Dr. Narębski, Taylor Blau and SZEDER Gábor for their
reviews.

I look forward to everyone's reviews!

Thanks

 * Abhishek

----------------------------------------------------------------------------

Improvements left for a future series:

 * Save commits with generation data overflow and extra edge commits instead
   of looping over all commits. cf. 858sbel67n.fsf@gmail.com
 * Verify both topological levels and corrected commit dates when present.
   cf. 85pn4tnk8u.fsf@gmail.com

Changes in version 7:

 * Moved the documentation patch ahead of "commit-graph: implement corrected
   commit date" and elaborated on the introduction of generation number v2.

Changes in version 6:

 * Fixed typos in commit message for "commit-graph: implement corrected
   commit date".
 * Removed an unnecessary else-block in "commit-graph: implement corrected
   commit date".
 * Validate mixed generation chain correctly while writing in "commit-graph:
   use generation v2 only if the entire chain does".
 * Die if the GDAT chunk indicates data has overflown but there are is no
   generation data overflow chunk.

Changes in version 5:

 * Explained a possible reason for no change in performance for
   "commit-graph: fix regression when computing bloom-filters"
 * Clarified about the addition of a new test for 11-digit octal
   implementations of ustar.
 * Fixed duplicate test names in "commit-graph: consolidate
   fill_commit_graph_info".
 * Swapped the order "commit-graph: return 64-bit generation number",
   "commit-graph: add a slab to store topological levels" to minimize lines
   changed.
 * Fixed the mismerge in "commit-graph: return 64-bit generation number"
 * Clarified the preparatory steps are for the larger goal of implementing
   generation number v2 in "commit-graph: return 64-bit generation number".
 * Moved the rename of "run_three_modes()" to "run_all_modes()" into a new
   patch "t6600-test-reach: generalize *_three_modes".
 * Explained and removed the checks for GENERATION_NUMBER_INFINITY that can
   never be true in "commit-graph: add a slab to store topological levels".
 * Fixed incorrect logic for verifying commit-graph in "commit-graph:
   implement corrected commit date".
 * Added minor improvements to commit message of "commit-graph: implement
   generation data chunk".
 * Added '--date ' option to test_commit() in 'test-lib-functions.sh' in
   "commit-graph: implement generation data chunk".
 * Improved coding style (also in tests) for "commit-graph: use generation
   v2 only if entire chain does".
 * Simplified test repository structure in "commit-graph: use generation v2
   only if entire chain does" as only the number of commits in a split
   commit-graph layer are relevant.
 * Added a new test in "commit-graph: use generation v2 only if entire chain
   does" to check if the layers are merged correctly.
 * Explicitly mentioned commit "091f4cf3" in the commit-message of
   "commit-graph: use corrected commit dates in paint_down_to_common()".
 * Minor corrections to documentation in "doc: add corrected commit date
   info".
 * Minor corrections to coding style.

Changes in version 4:

 * Added GDOV to handle overflows in generation data.
 * Added a test for writing tip graph for a generation number v2 graph chain
   in t5324-split-commit-graph.sh
 * Added a section on how mixed generation number chains are handled in
   Documentation/technical/commit-graph-format.txt
 * Reverted unimportant whitespace, style changes in commit-graph.c
 * Added header comments about the order of comparision for
   compare_commits_by_gen_then_commit_date in commit.h,
   compare_commits_by_gen in commit-graph.h
 * Elaborated on why t6404 fails with corrected commit date and must be run
   with GIT_TEST_COMMIT_GRAPH=1in the commit "commit-reach: use corrected
   commit dates in paint_down_to_common()"
 * Elaborated on write behavior for mixed generation number chains in the
   commit "commit-graph: use generation v2 only if entire chain does"
 * Added notes about adding the topo_level slab to struct
   write_commit_graph_context as well as struct commit_graph.
 * Clarified commit message for "commit-graph: consolidate
   fill_commit_graph_info"
 * Removed the claim "GDAT can store future generation numbers" because it
   hasn't been tested yet.

Changes in version 3:

 * Reordered patches to implement corrected commit date before generation
   data chunk [3].
 * Split "implement corrected commit date" into two patches - one
   introducing the topo level slab and other implementing corrected commit
   dates.
 * Extended split-commit-graph tests to verify at the end of test.
 * Use topological levels as generation number if any of split commit-graph
   files do not have generation data chunk.

[3]
https://lore.kernel.org/git/aee0ae56-3395-6848-d573-27a318d72755@gmail.com/

Changes in version 2:

 * Add tests for generation data chunk.
 * Add an option GIT_TEST_COMMIT_GRAPH_NO_GDAT to control whether to write
   generation data chunk.
 * Compare commits with corrected commit dates if present in
   paint_down_to_common().
 * Update technical documentation.
 * Handle mixed generation commit chains.
 * Improve commit messages for "commit-graph: fix regression when computing
   bloom filter", "commit-graph: consolidate fill_commit_graph_info",
 * Revert unnecessary whitespace changes.
 * Split uint_32 -> timestamp_t change into a new commit.

Abhishek Kumar (11):
  commit-graph: fix regression when computing Bloom filters
  revision: parse parent in indegree_walk_step()
  commit-graph: consolidate fill_commit_graph_info
  t6600-test-reach: generalize *_three_modes
  commit-graph: add a slab to store topological levels
  commit-graph: return 64-bit generation number
  commit-graph: document generation number v2
  commit-graph: implement corrected commit date
  commit-graph: implement generation data chunk
  commit-graph: use generation v2 only if entire chain does
  commit-reach: use corrected commit dates in paint_down_to_common()

 .../technical/commit-graph-format.txt         |  28 +-
 Documentation/technical/commit-graph.txt      |  77 +++++-
 commit-graph.c                                | 251 ++++++++++++++----
 commit-graph.h                                |  15 +-
 commit-reach.c                                |  38 +--
 commit-reach.h                                |   2 +-
 commit.c                                      |   4 +-
 commit.h                                      |   5 +-
 revision.c                                    |  13 +-
 t/README                                      |   3 +
 t/helper/test-read-graph.c                    |   4 +
 t/t4216-log-bloom.sh                          |   4 +-
 t/t5000-tar-tree.sh                           |  24 +-
 t/t5318-commit-graph.sh                       |  79 +++++-
 t/t5324-split-commit-graph.sh                 | 193 +++++++++++++-
 t/t6404-recursive-merge.sh                    |   5 +-
 t/t6600-test-reach.sh                         |  68 ++---
 t/test-lib-functions.sh                       |   6 +
 upload-pack.c                                 |   2 +-
 19 files changed, 667 insertions(+), 154 deletions(-)


base-commit: e6362826a0409539642a5738db61827e5978e2e4
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-676%2Fabhishekkumar2718%2Fcorrected_commit_date-v7
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-676/abhishekkumar2718/corrected_commit_date-v7
Pull-Request: https://github.com/gitgitgadget/git/pull/676

Range-diff vs v6:

  1:  4d8eb415578 =  1:  9ac331b63ee commit-graph: fix regression when computing Bloom filters
  2:  05dcb862818 =  2:  90ca0a1fd69 revision: parse parent in indegree_walk_step()
  3:  dcb9891d819 =  3:  b3040696d43 commit-graph: consolidate fill_commit_graph_info
  4:  4fbdee7ac90 =  4:  085085a4330 t6600-test-reach: generalize *_three_modes
  5:  fbd8feb5d8c =  5:  3b1aae4106a commit-graph: add a slab to store topological levels
  6:  855ff662a44 =  6:  ea32cba16ef commit-graph: return 64-bit generation number
 11:  e571f03d8bd !  7:  8647b5d2e38 doc: add corrected commit date info
     @@ Metadata
      Author: Abhishek Kumar <abhishekkumar8222@gmail.com>
      
       ## Commit message ##
     -    doc: add corrected commit date info
     +    commit-graph: document generation number v2
      
     -    With generation data chunk and corrected commit dates implemented, let's
     -    update the technical documentation for commit-graph.
     +    Git uses topological levels in the commit-graph file for commit-graph
     +    traversal operations like 'git log --graph'. Unfortunately, topological
     +    levels can perform worse than committer date when parents of a commit
     +    differ greatly in generation numbers [1]. For example, 'git merge-base
     +    v4.8 v4.9' on the Linux repository walks 635,579 commits using
     +    topological levels and walks 167,468 using committer date. Since
     +    091f4cf3 (commit: don't use generation numbers if not needed,
     +    2018-08-30), 'git merge-base' uses committer date heuristic unless there
     +    is a cutoff because of the performance hit.
     +
     +    [1] https://lore.kernel.org/git/efa3720fb40638e5d61c6130b55e3348d8e4339e.1535633886.git.gitgitgadget@gmail.com/
     +
     +    Thus, the need for generation number v2 was born. As Git used to die
     +    when graph version understood by it and in the commit-graph file are
     +    different [2], we needed a way to distinguish between the old and new
     +    generation number without incrementing the graph version.
     +
     +    [2] https://lore.kernel.org/git/87a7gdspo4.fsf@evledraar.gmail.com/
     +
     +    The following candidates were proposed (https://github.com/derrickstolee/gen-test,
     +    https://github.com/abhishekkumar2718/git/pull/1):
     +    - (Epoch, Date) Pairs.
     +    - Maximum Generation Numbers.
     +    - Corrected Commit Date.
     +    - FELINE Index.
     +    - Corrected Commit Date with Monotonically Increasing Offsets.
     +
     +    Based on performance, local computability, and immutability (along with
     +    the introduction of an additional commit-graph chunk which relieved the
     +    requirement of backwards-compatibility) Corrected Commit Date was chosen
     +    as generation number v2 and is defined as follows:
     +
     +    For a commit C, let its corrected commit date  be the maximum of the
     +    commit date of C and the corrected commit dates of its parents plus 1.
     +    Then corrected commit date offset is the difference between corrected
     +    commit date of C and commit date of C. As a special case, a root commit
     +    with the timestamp zero has corrected commit date of 1 to distinguish it
     +    from GENERATION_NUMBER_ZERO (that is, an uncomputed generation number).
     +
     +    While it was proposed initially to store corrected commit date offsets
     +    within Commit Data Chunk, storing the offsets in a new chunk did not
     +    affect the performance measurably. The new chunk is "Generation DATa
     +    (GDAT) chunk" and it stores corrected commit date offsets while CDAT
     +    chunk stores topological level. The old versions of Git would ignore
     +    GDAT chunk, using topological levels from CDAT chunk. In contrast, new
     +    versions of Git would use corrected commit dates, falling back to
     +    topological level if the generation data chunk is absent in the
     +    commit-graph file.
     +
     +    While storing corrected commit date offsets saves us 4 bytes per commit
     +    (as compared with storing corrected commit dates directly), it's however
     +    possible for the offset to overflow the space allocated. To handle such
     +    cases, we introduce a new chunk, _Generation Data Overflow_ (GDOV) that
     +    stores the corrected commit date. For overflowing offsets, we set MSB
     +    and store the position into the GDOV chunk, in a mechanism similar to
     +    the Extra Edges list chunk.
     +
     +    For mixed generation number environment (for example new Git on the
     +    command line, old Git used by GUI client), we can encounter a
     +    mixed-chain commit-graph (a commit-graph chain where some of split
     +    commit-graph files have GDAT chunk and others do not). As backward
     +    compatibility is one of the goals, we can define the following behavior:
     +
     +    While reading a mixed-chain commit-graph version, we fall back on
     +    topological levels as corrected commit dates and topological levels
     +    cannot be compared directly.
     +
     +    When adding new layer to the split commit-graph file, and when merging
     +    some or all layers (replacing them in the latter case), the new layer
     +    will have GDAT chunk if and only if in the final result there would be
     +    no layer without GDAT chunk just below it.
      
          Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
      
  7:  8fbe7486405 =  8:  ec598f1d500 commit-graph: implement corrected commit date
  8:  6d0696ae216 =  9:  71d81518857 commit-graph: implement generation data chunk
  9:  fba0d7f3dfe = 10:  07a88f1aae6 commit-graph: use generation v2 only if entire chain does
 10:  ba1f2c5555f = 11:  523e2d4a902 commit-reach: use corrected commit dates in paint_down_to_common()

-- 
gitgitgadget

  parent reply	other threads:[~2021-02-01  6:59 UTC|newest]

Thread overview: 211+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  9:13 [PATCH 0/6] " Abhishek Kumar via GitGitGadget
2020-07-28  9:13 ` [PATCH 1/6] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-07-28 15:28   ` Taylor Blau
2020-07-30  5:24     ` Abhishek Kumar
2020-08-04  0:46   ` Jakub Narębski
2020-08-04  0:56     ` Taylor Blau
2020-08-04 10:10       ` Jakub Narębski
2020-08-04  7:55     ` Jakub Narębski
2020-07-28  9:13 ` [PATCH 2/6] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-07-28 13:00   ` Derrick Stolee
2020-07-28 15:30     ` Taylor Blau
2020-08-05 23:16   ` Jakub Narębski
2020-07-28  9:13 ` [PATCH 3/6] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-07-28 13:14   ` Derrick Stolee
2020-07-28 15:19     ` René Scharfe
2020-07-28 15:58       ` Derrick Stolee
2020-07-28 16:01     ` Taylor Blau
2020-07-30  6:07     ` Abhishek Kumar
2020-07-28  9:13 ` [PATCH 4/6] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-07-28 16:03   ` Taylor Blau
2020-07-28  9:13 ` [PATCH 5/6] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-07-28 16:12   ` Taylor Blau
2020-07-30  6:52     ` Abhishek Kumar
2020-07-28  9:13 ` [PATCH 6/6] commit-graph: implement corrected commit date offset Abhishek Kumar via GitGitGadget
2020-07-28 15:55   ` Derrick Stolee
2020-07-28 16:23     ` Taylor Blau
2020-07-30  7:27     ` Abhishek Kumar
2020-07-28 14:54 ` [PATCH 0/6] [GSoC] Implement Corrected Commit Date Taylor Blau
2020-07-30  7:47   ` Abhishek Kumar
2020-07-28 16:35 ` Derrick Stolee
2020-08-09  2:53 ` [PATCH v2 00/10] " Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 01/10] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 04/10] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 05/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-10 16:28     ` Derrick Stolee
2020-08-11 11:03       ` Abhishek Kumar
2020-08-11 12:27         ` Derrick Stolee
2020-08-11 18:58           ` Taylor Blau
2020-08-09  2:53   ` [PATCH v2 06/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 07/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-10 14:23     ` Derrick Stolee
2020-08-14  4:59       ` Abhishek Kumar
2020-08-14 12:24         ` Derrick Stolee
2020-08-09  2:53   ` [PATCH v2 08/10] commit-graph: handle mixed generation commit chains Abhishek Kumar via GitGitGadget
2020-08-10 16:42     ` Derrick Stolee
2020-08-11 11:36       ` Abhishek Kumar
2020-08-11 12:43         ` Derrick Stolee
2020-08-09  2:53   ` [PATCH v2 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-09  2:53   ` [PATCH v2 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-10 16:47   ` [PATCH v2 00/10] [GSoC] Implement Corrected Commit Date Derrick Stolee
2020-08-15 16:39   ` [PATCH v3 00/11] " Abhishek Kumar via GitGitGadget
2020-08-15 16:39     ` [PATCH v3 01/11] commit-graph: fix regression when computing bloom filter Abhishek Kumar via GitGitGadget
2020-08-17 22:30       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-08-18 14:18       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-08-19 17:54       ` Jakub Narębski
2020-08-21  4:11         ` Abhishek Kumar
2020-08-25 11:11           ` Jakub Narębski
2020-09-01 11:35             ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 04/11] commit-graph: consolidate compare_commits_by_gen Abhishek Kumar via GitGitGadget
2020-08-17 13:22       ` Derrick Stolee
2020-08-21 11:05       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 05/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-08-21 13:14       ` Jakub Narębski
2020-08-25  5:04         ` Abhishek Kumar
2020-08-25 12:18           ` Jakub Narębski
2020-09-01 12:06             ` Abhishek Kumar
2020-09-03 13:42               ` Jakub Narębski
2020-09-05 17:21                 ` Abhishek Kumar
2020-09-13 15:39                   ` Jakub Narębski
2020-09-28 21:48                     ` Jakub Narębski
2020-10-05  5:25                       ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 06/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-08-21 18:43       ` Jakub Narębski
2020-08-25  6:14         ` Abhishek Kumar
2020-08-25  7:33           ` Jakub Narębski
2020-08-25  7:56             ` Jakub Narębski
2020-09-01 10:26               ` Abhishek Kumar
2020-09-03  9:25                 ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-08-22  0:05       ` Jakub Narębski
2020-08-25  6:49         ` Abhishek Kumar
2020-08-25 10:07           ` Jakub Narębski
2020-09-01 11:01             ` Abhishek Kumar
2020-08-15 16:39     ` [PATCH v3 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-08-22 13:09       ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-08-22 17:14       ` Jakub Narębski
2020-08-26  7:15         ` Abhishek Kumar
2020-08-26 10:38           ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-08-22 19:09       ` Jakub Narębski
2020-09-01 10:08         ` Abhishek Kumar
2020-09-03 19:11           ` Jakub Narębski
2020-08-15 16:39     ` [PATCH v3 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-08-22 22:20       ` Jakub Narębski
2020-08-27  6:39         ` Abhishek Kumar
2020-08-27 12:43           ` Jakub Narębski
2020-08-27 13:15           ` Derrick Stolee
2020-09-01 13:01             ` Abhishek Kumar
2020-08-17  0:13     ` [PATCH v3 00/11] [GSoC] Implement Corrected Commit Date Jakub Narębski
     [not found]       ` <CANQwDwdKp7oKy9BeKdvKhwPUiq0R5MS8TCw-eWGCYCoMGv=G-g@mail.gmail.com>
2020-08-17  1:32         ` Fwd: " Taylor Blau
2020-08-17  7:56           ` Jakub Narębski
2020-08-18  6:12       ` Abhishek Kumar
2020-08-23 15:27       ` Jakub Narębski
2020-08-24  2:49         ` Abhishek Kumar
2020-10-07 14:09     ` [PATCH v4 00/10] " Abhishek Kumar via GitGitGadget
2020-10-07 14:09       ` [PATCH v4 01/10] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2020-10-24 23:16         ` Jakub Narębski
2020-10-25 20:58           ` Taylor Blau
2020-11-03  5:36             ` Abhishek Kumar
2020-10-07 14:09       ` [PATCH v4 02/10] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-10-24 23:41         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 03/10] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-10-25 10:52         ` Jakub Narębski
2020-10-27  6:33           ` Abhishek Kumar
2020-10-07 14:09       ` [PATCH v4 04/10] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-10-25 13:48         ` Jakub Narębski
2020-11-03  6:40           ` Abhishek Kumar
2020-10-07 14:09       ` [PATCH v4 05/10] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-10-25 22:17         ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 06/10] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-10-27 18:53         ` Jakub Narębski
2020-11-03 11:44           ` Abhishek Kumar
2020-11-04 16:45             ` Jakub Narębski
2020-11-05 14:05               ` Philip Oakley
2020-11-05 18:22                 ` Junio C Hamano
2020-11-06 18:26                   ` Extending and updating gitglossary (was: Re: [PATCH v4 06/10] commit-graph: implement corrected commit date) Jakub Narębski
2020-11-06 19:33                     ` Extending and updating gitglossary Junio C Hamano
2020-11-08 17:23                     ` Extending and updating gitglossary (was: Re: [PATCH v4 06/10] commit-graph: implement corrected commit date) Philip Oakley
2020-11-10  1:35                       ` Extending and updating gitglossary Jakub Narębski
2020-11-10 14:04                         ` Philip Oakley
2020-11-10 23:52                           ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 07/10] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-10-30 12:45         ` Jakub Narębski
2020-11-06 11:25           ` Abhishek Kumar
2020-11-06 17:56             ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 08/10] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-11-01  0:55         ` Jakub Narębski
2020-11-12 10:01           ` Abhishek Kumar
2020-11-13  9:59             ` Jakub Narębski
2020-10-07 14:09       ` [PATCH v4 09/10] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-11-03 17:59         ` Jakub Narębski
2020-11-03 18:19           ` Junio C Hamano
2020-11-20 10:33           ` Abhishek Kumar
2020-10-07 14:09       ` [PATCH v4 10/10] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-11-04  1:37         ` Jakub Narębski
2020-11-21  6:30           ` Abhishek Kumar
2020-11-04 23:37       ` [PATCH v4 00/10] [GSoC] Implement Corrected Commit Date Jakub Narębski
2020-11-22  5:31         ` Abhishek Kumar
2020-12-28 11:15       ` [PATCH v5 00/11] " Abhishek Kumar via GitGitGadget
2020-12-28 11:15         ` [PATCH v5 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2020-12-30  1:35           ` Derrick Stolee
2021-01-08  5:45             ` Abhishek Kumar
2021-01-05  9:45           ` SZEDER Gábor
2021-01-05  9:47             ` SZEDER Gábor
2021-01-08  5:51             ` Abhishek Kumar
2020-12-28 11:15         ` [PATCH v5 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2020-12-30  1:53           ` Derrick Stolee
2021-01-10 12:21             ` Abhishek Kumar
2020-12-28 11:16         ` [PATCH v5 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2020-12-30  3:23           ` Derrick Stolee
2021-01-10 13:13             ` Abhishek Kumar
2021-01-11 12:43               ` Derrick Stolee
2020-12-28 11:16         ` [PATCH v5 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2020-12-28 11:16         ` [PATCH v5 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2020-12-30  4:35         ` [PATCH v5 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-01-10 14:06           ` Abhishek Kumar
2021-01-16 18:11         ` [PATCH v6 " Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 07/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 08/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 09/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 10/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2021-01-16 18:11           ` [PATCH v6 11/11] doc: add corrected commit date info Abhishek Kumar via GitGitGadget
2021-01-27  0:04             ` SZEDER Gábor
2021-01-30  5:29               ` Abhishek Kumar
2021-01-31  1:45                 ` Taylor Blau
2021-01-18 21:04           ` [PATCH v6 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-01-18 22:00             ` Taylor Blau
2021-01-23 12:11               ` Abhishek Kumar
2021-01-19  0:02             ` Junio C Hamano
2021-01-23 12:07             ` Abhishek Kumar
2021-02-01  6:58           ` Abhishek Kumar via GitGitGadget [this message]
2021-02-01  6:58             ` [PATCH v7 01/11] commit-graph: fix regression when computing Bloom filters Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 02/11] revision: parse parent in indegree_walk_step() Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 03/11] commit-graph: consolidate fill_commit_graph_info Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 04/11] t6600-test-reach: generalize *_three_modes Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 05/11] commit-graph: add a slab to store topological levels Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 06/11] commit-graph: return 64-bit generation number Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 07/11] commit-graph: document generation number v2 Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 08/11] commit-graph: implement corrected commit date Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 09/11] commit-graph: implement generation data chunk Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 10/11] commit-graph: use generation v2 only if entire chain does Abhishek Kumar via GitGitGadget
2021-02-01  6:58             ` [PATCH v7 11/11] commit-reach: use corrected commit dates in paint_down_to_common() Abhishek Kumar via GitGitGadget
2021-02-01 13:14             ` [PATCH v7 00/11] [GSoC] Implement Corrected Commit Date Derrick Stolee
2021-02-01 18:26               ` Junio C Hamano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=pull.676.v7.git.1612162726.gitgitgadget@gmail.com \
    --to=gitgitgadget@gmail.com \
    --cc=abhishekkumar8222@gmail.com \
    --cc=git@vger.kernel.org \
    --cc=jnareb@gmail.com \
    --cc=me@ttaylorr.com \
    --cc=stolee@gmail.com \
    --cc=szeder.dev@gmail.com \
    --subject='Re: [PATCH v7 00/11] [GSoC] Implement Corrected Commit Date' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).