From: Shenwei Wang <shenwei.wang@nxp.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Marek Vasut <marex@denx.de>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
Max Krummenacher <max.krummenacher@toradex.com>,
Matthias Schiffer <matthias.schiffer@tq-group.com>,
Denys Drozdov <denys.drozdov@toradex.com>,
Tim Harvey <tharvey@gateworks.com>,
Alex Marginean <alexandru.marginean@nxp.com>,
Reinhold Mueller <reinhold.mueller@emtrion.com>,
Shenwei Wang <shenwei.wang@nxp.com>,
Viorel Suman <viorel.suman@nxp.com>,
Abel Vesa <abelvesa@kernel.org>, Zhou Peng <eagle.zhou@nxp.com>,
Shijie Qin <shijie.qin@nxp.com>, Ming Qian <ming.qian@nxp.com>,
Peng Fan <peng.fan@nxp.com>, Li Yang <leoyang.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev
Subject: [PATCH v8 0/5] add imx8dxl evk support
Date: Wed, 14 Sep 2022 08:58:43 -0500 [thread overview]
Message-ID: <20220914135848.118616-1-shenwei.wang@nxp.com> (raw)
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
The series of patches is to add the imx8dxl soc and its evk board
support.
changes in V8:
- change the flag of gpio phandle in reg_fec1_sel node to
GPIO_ACTIVE_LOW to match the hardware behavior.
changes in V7:
- move the fec1 reset gpio into its phy node
changes in V6:
- The V6 changes mainly respond to the comments from Shawn
- Separate the V5 patch into SoC and Board commits
- Remove the unnecessary properties of "max-frequency"
in usdhc2 node
- Remove the unnecessary properties of "clk_csr" in eqos node
- Fix several coding style problems
changes in V5:
- change the "scu" node name to "system-controller"
- fix the typo in the comments for imx8dxl evk board
changes in V4:
- move i2c/mmc/serial aliases from soc to board
- correct the node names to follow the generic names recommendation
- remove some unused nodes in the evk board dts
changes in V3:
- re-order the commit sequence according to Krzysztof's feedback
- correct the syntax and styple problems pointed by Krzysztof
(Thank you for the detailed review, Krzysztof!)
- remove the unused nodes in imx8dxl-evk.dts
- dt_binding_check passed
Changes in V2:
- removed the edma2 device node because the edma v3 driver hasn't been
upstreamed yet.
- removed the imx8dxl_cm4 alias to fix the compile error.
- removed the extra blank lines at EOF.
- dt_binding_check passed.
Shenwei Wang (5):
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
arm64: dts: imx8: add a node label to ddr-pmu
arm64: dts: freescale: add i.MX8DXL SoC support
arm64: dts: freescale: add support for i.MX8DXL EVK board
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 426 ++++++++++++++++++
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 52 +++
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 142 ++++++
.../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 9 +
.../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 74 +++
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 238 ++++++++++
include/dt-bindings/firmware/imx/rsrc.h | 7 +
10 files changed, 956 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
--
2.25.1
next reply other threads:[~2022-09-14 13:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 13:58 Shenwei Wang [this message]
2022-09-14 13:58 ` [PATCH v8 1/5] dt-bindings: firmware: add missing resource IDs for imx8dxl Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 2/5] dt-bindings: arm: imx: update fsl.yaml " Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 3/5] arm64: dts: imx8: add a node label to ddr-pmu Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 4/5] arm64: dts: freescale: add i.MX8DXL SoC support Shenwei Wang
2022-09-14 13:58 ` [PATCH v8 5/5] arm64: dts: freescale: add support for i.MX8DXL EVK board Shenwei Wang
2022-09-15 12:04 ` [PATCH v8 0/5] add imx8dxl evk support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914135848.118616-1-shenwei.wang@nxp.com \
--to=shenwei.wang@nxp.com \
--cc=abelvesa@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=alexandru.marginean@nxp.com \
--cc=denys.drozdov@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=eagle.zhou@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=matthias.schiffer@tq-group.com \
--cc=max.krummenacher@toradex.com \
--cc=ming.qian@nxp.com \
--cc=peng.fan@nxp.com \
--cc=reinhold.mueller@emtrion.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shijie.qin@nxp.com \
--cc=tharvey@gateworks.com \
--cc=viorel.suman@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).