Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 19/30] drm/i915: Use the uncached domain for the display planes v2
Date: Tue, 12 Apr 2011 21:31:47 +0100
Message-ID: <1302640318-23165-20-git-send-email-chris@chris-wilson.co.uk> (raw)
In-Reply-To: <1302640318-23165-1-git-send-email-chris@chris-wilson.co.uk>

From: Eric Anholt <eric@anholt.net>

The simplest and common method for ensuring scanout coherency on all
chipsets is to mark the scanout buffers as uncached (and for
userspace to remember to flush the render cache every so often).

We can improve upon this for later generations by marking scanout
objects as GFDT and only flush those cachelines when required. However,
we start simple.

[v2: Move the set to uncached above the clflush.  Otherwise, we'd skip
the clflush and try to scan out data that was still sitting in the
cache.]

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 9027ee4..26b9e87 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3067,6 +3067,19 @@ i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj,
 			return ret;
 	}
 
+	/* The display engine is not coherent with the LLC cache on gen6.  As
+	 * a result, we make sure that the pinning that is about to occur is
+	 * done with uncached PTEs. This is lowest common denominator for all
+	 * chipsets.
+	 *
+	 * However for gen6+, we could do better by using the GFDT bit instead
+	 * of uncaching, which would allow us to flush all the LLC-cached data
+	 * with that bit in the PTE to main memory with just one PIPE_CONTROL.
+	 */
+	ret = i915_gem_object_set_cache_level(obj, I915_CACHE_NONE);
+	if (ret)
+		return ret;
+
 	i915_gem_object_flush_cpu_write_domain(obj);
 
 	old_read_domains = obj->base.read_domains;
-- 
1.7.4.1

  parent reply index

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-12 20:31 i915 next Chris Wilson
2011-04-12 20:31 ` [PATCH 01/30] drm/i915: Split the crtc_mode_set function along HAS_PCH_SPLIT() lines Chris Wilson
2011-04-12 20:31 ` [PATCH 02/30] drm/i915: Move the vblank pre/post modeset to the common crtc_mode_set Chris Wilson
2011-04-12 20:31 ` [PATCH 03/30] drm/i915: Remove the PCH paths from the pre-Ironlake crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` [PATCH 04/30] drm/i915: Drop the eDP paths from the pre-Ironlake crtc_mode_set Chris Wilson
2011-04-12 20:31 ` [PATCH 05/30] drm/i915: Drop the remaining bit of Ironlake code from i9xx_crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` [PATCH 06/30] drm/i915: Drop non-HAS_PCH_SPLIT() code from ironlake_crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` [PATCH 07/30] drm/i915: Drop remaining pre-Ironlake " Chris Wilson
2011-04-12 20:31 ` [PATCH 08/30] drm/i915: Clean up leftover DPLL and LVDS register choice from pch split Chris Wilson
2011-04-12 20:31 ` [PATCH 09/30] drm/i915: Fold the DPLL limit defines into the structs that use them Chris Wilson
2011-04-12 20:31 ` [PATCH 10/30] drm/i915: fix ilk rc6 teardown locking Chris Wilson
2011-04-12 20:31 ` [PATCH 11/30] drm/1915: ringbuffer wait for idle function Chris Wilson
2011-04-12 20:31 ` [PATCH 12/30] drm/i915: fix rc6 initialization on Ironlake Chris Wilson
2011-04-12 20:31 ` [PATCH 13/30] drm/i915: re-enable rc6 for ironlake Chris Wilson
2011-04-12 20:31 ` [PATCH 14/30] drm/i915: use i915_enable_rc6 on SNB too Chris Wilson
2011-04-12 20:31 ` [PATCH 15/30] drm/i915: Rename agp_type to cache_level Chris Wilson
2011-04-13 15:57   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 16/30] drm/i915: Mark the cursor and the overlay as being part of the display planes Chris Wilson
2011-04-13 16:00   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 17/30] drm/i915: Do not clflush snooped objects Chris Wilson
2011-04-13 16:04   ` Daniel Vetter
2011-04-13 17:34     ` Chris Wilson
2011-04-13 20:47       ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 18/30] drm/i915: Add an interface to dynamically change the cache level Chris Wilson
2011-04-13 18:59   ` Daniel Vetter
2011-04-13 19:21     ` Chris Wilson
2011-04-13 22:27     ` [PATCH 1/3] drm/i915: Introduce i915_gem_object_finish_gpu() Chris Wilson
2011-04-13 22:27       ` [PATCH 2/3] drm/i915: Introduce i915_gem_object_finish_gtt() Chris Wilson
2011-04-13 22:27       ` [PATCH 3/3] drm/i915: Add an interface to dynamically change the cache level Chris Wilson
2011-04-12 20:31 ` Chris Wilson [this message]
2011-04-12 20:31 ` [PATCH 20/30] drm/i915: Use the CPU domain for snooped pwrites Chris Wilson
2011-04-12 20:31 ` [PATCH 21/30] drm/i915: Redirect GTT mappings to the CPU page if cache-coherent Chris Wilson
2011-04-13 15:57   ` Eric Anholt
2011-04-13 16:19     ` Chris Wilson
2011-04-13 18:35     ` [PATCH] " Chris Wilson
2011-04-13 19:13       ` Daniel Vetter
2011-04-13 19:47         ` Chris Wilson
2011-04-13 20:26         ` [PATCH] drm/i915: Prevent mmap access through the GTT of snooped pages Chris Wilson
2011-04-13 20:51           ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 22/30] drm/i915: Use the LLC mode on gen6 for everything but display Chris Wilson
2011-04-13 19:15   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 23/30] drm/i915: Cache GT fifo count for SandyBridge Chris Wilson
2011-04-14  2:21   ` Ben Widawsky
2011-04-14  4:48     ` Ben Widawsky
2011-04-12 20:31 ` [PATCH 24/30] drm/i915: Refactor pwrite/pread to use single copy of get_user_pages Chris Wilson
2011-04-13 15:59   ` Eric Anholt
2011-04-13 17:24     ` Chris Wilson
2011-04-13 19:35       ` Eric Anholt
2011-04-13 19:26   ` Daniel Vetter
2011-04-13 19:56     ` Chris Wilson
2011-04-13 20:56       ` Daniel Vetter
2011-04-14 23:23       ` Ben Widawsky
2011-04-15  9:48         ` Paul Menzel
2011-04-16  8:03           ` Chris Wilson
2011-04-12 20:31 ` [PATCH 25/30] drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/ Chris Wilson
2011-04-12 20:31 ` [PATCH 26/30] drm/i915: Maintain fenced gpu access until we flush the fence Chris Wilson
2011-04-13 19:37   ` Daniel Vetter
2011-04-13 20:15     ` Chris Wilson
2011-04-13 20:58       ` Daniel Vetter
2011-04-13 21:37         ` Chris Wilson
2011-04-12 20:31 ` [PATCH 27/30] drm/i915: Invalidate fenced read domains upon flush Chris Wilson
2011-04-13 19:43   ` Daniel Vetter
2011-04-13 20:38     ` Chris Wilson
2011-04-13 21:02       ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 28/30] drm/i915: Pass the fence register number to be written Chris Wilson
2011-04-13 19:48   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 29/30] drm/i915: Track fence setup separately from fenced object lifetime Chris Wilson
2011-04-13 20:42   ` Daniel Vetter
2011-04-13 21:56     ` Chris Wilson
2011-04-12 20:31 ` [PATCH 30/30] drm/i915: Only print out the actual number of fences for i915_error_state Chris Wilson
2011-04-13  7:26 ` i915 next Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1302640318-23165-20-git-send-email-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git