Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 06/30] drm/i915: Drop non-HAS_PCH_SPLIT() code from ironlake_crtc_mode_set().
Date: Tue, 12 Apr 2011 21:31:34 +0100
Message-ID: <1302640318-23165-7-git-send-email-chris@chris-wilson.co.uk> (raw)
In-Reply-To: <1302640318-23165-1-git-send-email-chris@chris-wilson.co.uk>

From: Eric Anholt <eric@anholt.net>

Ironlake is where the PCH split started.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c |  361 ++++++++++++++--------------------
 1 files changed, 150 insertions(+), 211 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 834b2cf..a8497e5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4932,7 +4932,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	struct fdi_m_n m_n = {0};
 	u32 reg, temp;
 	u32 lvds_sync = 0;
-	int target_clock;
+	int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
 
 	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
 		if (encoder->base.crtc != crtc)
@@ -4974,8 +4974,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 			      refclk / 1000);
 	} else if (!IS_GEN2(dev)) {
 		refclk = 96000;
-		if (HAS_PCH_SPLIT(dev) &&
-		    (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+		if (!has_edp_encoder ||
+		    intel_encoder_is_pch_edp(&has_edp_encoder->base))
 			refclk = 120000; /* 120Mhz refclk */
 	} else {
 		refclk = 48000;
@@ -5034,140 +5034,137 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* FDI link */
-	if (HAS_PCH_SPLIT(dev)) {
-		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		int lane = 0, link_bw, bpp;
-		/* CPU eDP doesn't require FDI link, so just set DP M/N
-		   according to current link config */
-		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+	lane = 0;
+	/* CPU eDP doesn't require FDI link, so just set DP M/N
+	   according to current link config */
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		target_clock = mode->clock;
+		intel_edp_link_config(has_edp_encoder,
+				      &lane, &link_bw);
+	} else {
+		/* [e]DP over FDI requires target mode clock
+		   instead of link clock */
+		if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
 			target_clock = mode->clock;
-			intel_edp_link_config(has_edp_encoder,
-					      &lane, &link_bw);
-		} else {
-			/* [e]DP over FDI requires target mode clock
-			   instead of link clock */
-			if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
-				target_clock = mode->clock;
-			else
-				target_clock = adjusted_mode->clock;
-
-			/* FDI is a binary signal running at ~2.7GHz, encoding
-			 * each output octet as 10 bits. The actual frequency
-			 * is stored as a divider into a 100MHz clock, and the
-			 * mode pixel clock is stored in units of 1KHz.
-			 * Hence the bw of each lane in terms of the mode signal
-			 * is:
-			 */
-			link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-		}
+		else
+			target_clock = adjusted_mode->clock;
+
+		/* FDI is a binary signal running at ~2.7GHz, encoding
+		 * each output octet as 10 bits. The actual frequency
+		 * is stored as a divider into a 100MHz clock, and the
+		 * mode pixel clock is stored in units of 1KHz.
+		 * Hence the bw of each lane in terms of the mode signal
+		 * is:
+		 */
+		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+	}
 
-		/* determine panel color depth */
-		temp = I915_READ(PIPECONF(pipe));
-		temp &= ~PIPE_BPC_MASK;
-		if (is_lvds) {
-			/* the BPC will be 6 if it is 18-bit LVDS panel */
-			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
-				temp |= PIPE_8BPC;
-			else
-				temp |= PIPE_6BPC;
-		} else if (has_edp_encoder) {
-			switch (dev_priv->edp.bpp/3) {
-			case 8:
-				temp |= PIPE_8BPC;
-				break;
-			case 10:
-				temp |= PIPE_10BPC;
-				break;
-			case 6:
-				temp |= PIPE_6BPC;
-				break;
-			case 12:
-				temp |= PIPE_12BPC;
-				break;
-			}
-		} else
+	/* determine panel color depth */
+	temp = I915_READ(PIPECONF(pipe));
+	temp &= ~PIPE_BPC_MASK;
+	if (is_lvds) {
+		/* the BPC will be 6 if it is 18-bit LVDS panel */
+		if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+			temp |= PIPE_8BPC;
+		else
+			temp |= PIPE_6BPC;
+	} else if (has_edp_encoder) {
+		switch (dev_priv->edp.bpp/3) {
+		case 8:
 			temp |= PIPE_8BPC;
-		I915_WRITE(PIPECONF(pipe), temp);
-
-		switch (temp & PIPE_BPC_MASK) {
-		case PIPE_8BPC:
-			bpp = 24;
 			break;
-		case PIPE_10BPC:
-			bpp = 30;
+		case 10:
+			temp |= PIPE_10BPC;
 			break;
-		case PIPE_6BPC:
-			bpp = 18;
+		case 6:
+			temp |= PIPE_6BPC;
 			break;
-		case PIPE_12BPC:
-			bpp = 36;
+		case 12:
+			temp |= PIPE_12BPC;
 			break;
-		default:
-			DRM_ERROR("unknown pipe bpc value\n");
-			bpp = 24;
-		}
-
-		if (!lane) {
-			/* 
-			 * Account for spread spectrum to avoid
-			 * oversubscribing the link. Max center spread
-			 * is 2.5%; use 5% for safety's sake.
-			 */
-			u32 bps = target_clock * bpp * 21 / 20;
-			lane = bps / (link_bw * 8) + 1;
 		}
+	} else
+		temp |= PIPE_8BPC;
+	I915_WRITE(PIPECONF(pipe), temp);
 
-		intel_crtc->fdi_lanes = lane;
+	switch (temp & PIPE_BPC_MASK) {
+	case PIPE_8BPC:
+		bpp = 24;
+		break;
+	case PIPE_10BPC:
+		bpp = 30;
+		break;
+	case PIPE_6BPC:
+		bpp = 18;
+		break;
+	case PIPE_12BPC:
+		bpp = 36;
+		break;
+	default:
+		DRM_ERROR("unknown pipe bpc value\n");
+		bpp = 24;
+	}
 
-		if (pixel_multiplier > 1)
-			link_bw *= pixel_multiplier;
-		ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+	if (!lane) {
+		/*
+		 * Account for spread spectrum to avoid
+		 * oversubscribing the link. Max center spread
+		 * is 2.5%; use 5% for safety's sake.
+		 */
+		u32 bps = target_clock * bpp * 21 / 20;
+		lane = bps / (link_bw * 8) + 1;
 	}
 
+	intel_crtc->fdi_lanes = lane;
+
+	if (pixel_multiplier > 1)
+		link_bw *= pixel_multiplier;
+	ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+
 	/* Ironlake: try to setup display ref clock before DPLL
 	 * enabling. This is only under driver's control after
 	 * PCH B stepping, previous chipset stepping should be
 	 * ignoring this setting.
 	 */
-	if (HAS_PCH_SPLIT(dev)) {
-		temp = I915_READ(PCH_DREF_CONTROL);
-		/* Always enable nonspread source */
-		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
-		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_ENABLE;
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-
-		POSTING_READ(PCH_DREF_CONTROL);
-		udelay(200);
-
-		if (has_edp_encoder) {
-			if (intel_panel_use_ssc(dev_priv)) {
-				temp |= DREF_SSC1_ENABLE;
-				I915_WRITE(PCH_DREF_CONTROL, temp);
-
-				POSTING_READ(PCH_DREF_CONTROL);
-				udelay(200);
-			}
-			temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+	temp = I915_READ(PCH_DREF_CONTROL);
+	/* Always enable nonspread source */
+	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+	temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+	temp &= ~DREF_SSC_SOURCE_MASK;
+	temp |= DREF_SSC_SOURCE_ENABLE;
+	I915_WRITE(PCH_DREF_CONTROL, temp);
+
+	POSTING_READ(PCH_DREF_CONTROL);
+	udelay(200);
 
-			/* Enable CPU source on CPU attached eDP */
-			if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-				if (intel_panel_use_ssc(dev_priv))
-					temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
-				else
-					temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
-			} else {
-				/* Enable SSC on PCH eDP if needed */
-				if (intel_panel_use_ssc(dev_priv)) {
-					DRM_ERROR("enabling SSC on PCH\n");
-					temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
-				}
-			}
+	if (has_edp_encoder) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			temp |= DREF_SSC1_ENABLE;
 			I915_WRITE(PCH_DREF_CONTROL, temp);
+
 			POSTING_READ(PCH_DREF_CONTROL);
 			udelay(200);
 		}
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Enable CPU source on CPU attached eDP */
+		if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			if (intel_panel_use_ssc(dev_priv))
+				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			else
+				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+		} else {
+			/* Enable SSC on PCH eDP if needed */
+			if (intel_panel_use_ssc(dev_priv)) {
+				DRM_ERROR("enabling SSC on PCH\n");
+				temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+			}
+		}
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
 	}
 
 	if (IS_PINEVIEW(dev)) {
@@ -5183,24 +5180,19 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* Enable autotuning of the PLL clock (if permissible) */
-	if (HAS_PCH_SPLIT(dev)) {
-		int factor = 21;
-
-		if (is_lvds) {
-			if ((intel_panel_use_ssc(dev_priv) &&
-			     dev_priv->lvds_ssc_freq == 100) ||
-			    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
-				factor = 25;
-		} else if (is_sdvo && is_tv)
-			factor = 20;
+	factor = 21;
+	if (is_lvds) {
+		if ((intel_panel_use_ssc(dev_priv) &&
+		     dev_priv->lvds_ssc_freq == 100) ||
+		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+			factor = 25;
+	} else if (is_sdvo && is_tv)
+		factor = 20;
 
-		if (clock.m1 < factor * clock.n)
-			fp |= FP_CB_TUNE;
-	}
+	if (clock.m1 < factor * clock.n)
+		fp |= FP_CB_TUNE;
 
 	dpll = 0;
-	if (!HAS_PCH_SPLIT(dev))
-		dpll = DPLL_VGA_MODE_DIS;
 
 	if (!IS_GEN2(dev)) {
 		if (is_lvds)
@@ -5212,7 +5204,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 			if (pixel_multiplier > 1) {
 				if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-				else if (HAS_PCH_SPLIT(dev))
+				else
 					dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 			}
 			dpll |= DPLL_DVO_HIGH_SPEED;
@@ -5226,8 +5218,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		else {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 			/* also FPA1 */
-			if (HAS_PCH_SPLIT(dev))
-				dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 			if (IS_G4X(dev) && has_reduced_clock)
 				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 		}
@@ -5245,8 +5236,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
 			break;
 		}
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
-			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 	} else {
 		if (is_lvds) {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
@@ -5277,15 +5266,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-	/* Ironlake's plane is forced to pipe, bit 24 is to
-	   enable color space conversion */
-	if (!HAS_PCH_SPLIT(dev)) {
-		if (pipe == 0)
-			dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
-		else
-			dspcntr |= DISPPLANE_SEL_PIPE_B;
-	}
-
 	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)
 		 * core speed.
@@ -5300,20 +5280,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
 	}
 
-	if (!HAS_PCH_SPLIT(dev))
-		dpll |= DPLL_VCO_ENABLE;
-
 	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
 	/* assign to Ironlake registers */
-	if (HAS_PCH_SPLIT(dev)) {
-		fp_reg = PCH_FP0(pipe);
-		dpll_reg = PCH_DPLL(pipe);
-	} else {
-		fp_reg = FP0(pipe);
-		dpll_reg = DPLL(pipe);
-	}
+	fp_reg = PCH_FP0(pipe);
+	dpll_reg = PCH_DPLL(pipe);
 
 	/* PCH eDP needs FDI, but CPU eDP does not */
 	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
@@ -5352,9 +5324,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	 * things on.
 	 */
 	if (is_lvds) {
-		reg = LVDS;
-		if (HAS_PCH_SPLIT(dev))
-			reg = PCH_LVDS;
+		reg = PCH_LVDS;
 
 		temp = I915_READ(reg);
 		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
@@ -5383,13 +5353,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		 * appropriately here, but we need to look more thoroughly into how
 		 * panels behave in the two modes.
 		 */
-		/* set the dithering flag on non-PCH LVDS as needed */
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-			if (dev_priv->lvds_dither)
-				temp |= LVDS_ENABLE_DITHER;
-			else
-				temp &= ~LVDS_ENABLE_DITHER;
-		}
 		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
 			lvds_sync |= LVDS_HSYNC_POLARITY;
 		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -5410,18 +5373,16 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* set the dithering flag and clear for anything other than a panel. */
-	if (HAS_PCH_SPLIT(dev)) {
-		pipeconf &= ~PIPECONF_DITHER_EN;
-		pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
-		if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
-			pipeconf |= PIPECONF_DITHER_EN;
-			pipeconf |= PIPECONF_DITHER_TYPE_ST1;
-		}
+	pipeconf &= ~PIPECONF_DITHER_EN;
+	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+	if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+		pipeconf |= PIPECONF_DITHER_EN;
+		pipeconf |= PIPECONF_DITHER_TYPE_ST1;
 	}
 
 	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else if (HAS_PCH_SPLIT(dev)) {
+	} else {
 		/* For non-DP output, clear any trans DP clock recovery setting.*/
 		I915_WRITE(TRANSDATA_M1(pipe), 0);
 		I915_WRITE(TRANSDATA_N1(pipe), 0);
@@ -5429,31 +5390,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
 	}
 
-	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+	if (!has_edp_encoder ||
+	    intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		I915_WRITE(dpll_reg, dpll);
 
 		/* Wait for the clocks to stabilize. */
 		POSTING_READ(dpll_reg);
 		udelay(150);
 
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-			temp = 0;
-			if (is_sdvo) {
-				temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-				if (temp > 1)
-					temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-				else
-					temp = 0;
-			}
-			I915_WRITE(DPLL_MD(pipe), temp);
-		} else {
-			/* The pixel multiplier can only be updated once the
-			 * DPLL is enabled and the clocks are stable.
-			 *
-			 * So write it again.
-			 */
-			I915_WRITE(dpll_reg, dpll);
-		}
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(dpll_reg, dpll);
 	}
 
 	intel_crtc->lowfreq_avail = false;
@@ -5504,33 +5454,24 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		   (adjusted_mode->crtc_vsync_start - 1) |
 		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
 
-	/* pipesrc and dspsize control the size that is scaled from,
-	 * which should always be the user's requested size.
+	/* pipesrc controls the size that is scaled from, which should
+	 * always be the user's requested size.
 	 */
-	if (!HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(DSPSIZE(plane),
-			   ((mode->vdisplay - 1) << 16) |
-			   (mode->hdisplay - 1));
-		I915_WRITE(DSPPOS(plane), 0);
-	}
 	I915_WRITE(PIPESRC(pipe),
 		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 
-	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
-		I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
-		I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+	I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+	I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+	I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+	I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
 
-		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-		}
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 	}
 
 	I915_WRITE(PIPECONF(pipe), pipeconf);
 	POSTING_READ(PIPECONF(pipe));
-	if (!HAS_PCH_SPLIT(dev))
-		intel_enable_pipe(dev_priv, pipe, false);
 
 	intel_wait_for_vblank(dev, pipe);
 
@@ -5542,8 +5483,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	I915_WRITE(DSPCNTR(plane), dspcntr);
 	POSTING_READ(DSPCNTR(plane));
-	if (!HAS_PCH_SPLIT(dev))
-		intel_enable_plane(dev_priv, plane, pipe);
 
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
 
-- 
1.7.4.1

  parent reply index

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-12 20:31 i915 next Chris Wilson
2011-04-12 20:31 ` [PATCH 01/30] drm/i915: Split the crtc_mode_set function along HAS_PCH_SPLIT() lines Chris Wilson
2011-04-12 20:31 ` [PATCH 02/30] drm/i915: Move the vblank pre/post modeset to the common crtc_mode_set Chris Wilson
2011-04-12 20:31 ` [PATCH 03/30] drm/i915: Remove the PCH paths from the pre-Ironlake crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` [PATCH 04/30] drm/i915: Drop the eDP paths from the pre-Ironlake crtc_mode_set Chris Wilson
2011-04-12 20:31 ` [PATCH 05/30] drm/i915: Drop the remaining bit of Ironlake code from i9xx_crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` Chris Wilson [this message]
2011-04-12 20:31 ` [PATCH 07/30] drm/i915: Drop remaining pre-Ironlake code from ironlake_crtc_mode_set() Chris Wilson
2011-04-12 20:31 ` [PATCH 08/30] drm/i915: Clean up leftover DPLL and LVDS register choice from pch split Chris Wilson
2011-04-12 20:31 ` [PATCH 09/30] drm/i915: Fold the DPLL limit defines into the structs that use them Chris Wilson
2011-04-12 20:31 ` [PATCH 10/30] drm/i915: fix ilk rc6 teardown locking Chris Wilson
2011-04-12 20:31 ` [PATCH 11/30] drm/1915: ringbuffer wait for idle function Chris Wilson
2011-04-12 20:31 ` [PATCH 12/30] drm/i915: fix rc6 initialization on Ironlake Chris Wilson
2011-04-12 20:31 ` [PATCH 13/30] drm/i915: re-enable rc6 for ironlake Chris Wilson
2011-04-12 20:31 ` [PATCH 14/30] drm/i915: use i915_enable_rc6 on SNB too Chris Wilson
2011-04-12 20:31 ` [PATCH 15/30] drm/i915: Rename agp_type to cache_level Chris Wilson
2011-04-13 15:57   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 16/30] drm/i915: Mark the cursor and the overlay as being part of the display planes Chris Wilson
2011-04-13 16:00   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 17/30] drm/i915: Do not clflush snooped objects Chris Wilson
2011-04-13 16:04   ` Daniel Vetter
2011-04-13 17:34     ` Chris Wilson
2011-04-13 20:47       ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 18/30] drm/i915: Add an interface to dynamically change the cache level Chris Wilson
2011-04-13 18:59   ` Daniel Vetter
2011-04-13 19:21     ` Chris Wilson
2011-04-13 22:27     ` [PATCH 1/3] drm/i915: Introduce i915_gem_object_finish_gpu() Chris Wilson
2011-04-13 22:27       ` [PATCH 2/3] drm/i915: Introduce i915_gem_object_finish_gtt() Chris Wilson
2011-04-13 22:27       ` [PATCH 3/3] drm/i915: Add an interface to dynamically change the cache level Chris Wilson
2011-04-12 20:31 ` [PATCH 19/30] drm/i915: Use the uncached domain for the display planes v2 Chris Wilson
2011-04-12 20:31 ` [PATCH 20/30] drm/i915: Use the CPU domain for snooped pwrites Chris Wilson
2011-04-12 20:31 ` [PATCH 21/30] drm/i915: Redirect GTT mappings to the CPU page if cache-coherent Chris Wilson
2011-04-13 15:57   ` Eric Anholt
2011-04-13 16:19     ` Chris Wilson
2011-04-13 18:35     ` [PATCH] " Chris Wilson
2011-04-13 19:13       ` Daniel Vetter
2011-04-13 19:47         ` Chris Wilson
2011-04-13 20:26         ` [PATCH] drm/i915: Prevent mmap access through the GTT of snooped pages Chris Wilson
2011-04-13 20:51           ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 22/30] drm/i915: Use the LLC mode on gen6 for everything but display Chris Wilson
2011-04-13 19:15   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 23/30] drm/i915: Cache GT fifo count for SandyBridge Chris Wilson
2011-04-14  2:21   ` Ben Widawsky
2011-04-14  4:48     ` Ben Widawsky
2011-04-12 20:31 ` [PATCH 24/30] drm/i915: Refactor pwrite/pread to use single copy of get_user_pages Chris Wilson
2011-04-13 15:59   ` Eric Anholt
2011-04-13 17:24     ` Chris Wilson
2011-04-13 19:35       ` Eric Anholt
2011-04-13 19:26   ` Daniel Vetter
2011-04-13 19:56     ` Chris Wilson
2011-04-13 20:56       ` Daniel Vetter
2011-04-14 23:23       ` Ben Widawsky
2011-04-15  9:48         ` Paul Menzel
2011-04-16  8:03           ` Chris Wilson
2011-04-12 20:31 ` [PATCH 25/30] drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/ Chris Wilson
2011-04-12 20:31 ` [PATCH 26/30] drm/i915: Maintain fenced gpu access until we flush the fence Chris Wilson
2011-04-13 19:37   ` Daniel Vetter
2011-04-13 20:15     ` Chris Wilson
2011-04-13 20:58       ` Daniel Vetter
2011-04-13 21:37         ` Chris Wilson
2011-04-12 20:31 ` [PATCH 27/30] drm/i915: Invalidate fenced read domains upon flush Chris Wilson
2011-04-13 19:43   ` Daniel Vetter
2011-04-13 20:38     ` Chris Wilson
2011-04-13 21:02       ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 28/30] drm/i915: Pass the fence register number to be written Chris Wilson
2011-04-13 19:48   ` Daniel Vetter
2011-04-12 20:31 ` [PATCH 29/30] drm/i915: Track fence setup separately from fenced object lifetime Chris Wilson
2011-04-13 20:42   ` Daniel Vetter
2011-04-13 21:56     ` Chris Wilson
2011-04-12 20:31 ` [PATCH 30/30] drm/i915: Only print out the actual number of fences for i915_error_state Chris Wilson
2011-04-13  7:26 ` i915 next Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1302640318-23165-7-git-send-email-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git