Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Ben Widawsky <ben@bwidawsk.net>
To: intel-gfx@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Subject: [PATCH 2/2] drm/i915: provide module parameter description
Date: Wed, 13 Jul 2011 14:38:18 -0700
Message-ID: <1310593098-20268-2-git-send-email-ben@bwidawsk.net> (raw)
In-Reply-To: <1310593098-20268-1-git-send-email-ben@bwidawsk.net>


Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
---
 drivers/gpu/drm/i915/i915_drv.c |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ef5cf03..ce045a8 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -39,39 +39,68 @@
 
 static int i915_modeset __read_mostly = -1;
 module_param_named(modeset, i915_modeset, int, 0400);
+MODULE_PARM_DESC(modeset,
+		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
+		"1=on, -1=force vga console preference [default])");
 
 unsigned int i915_fbpercrtc __always_unused = 0;
 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
 
 int i915_panel_ignore_lid __read_mostly = 0;
 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
+MODULE_PARM_DESC(panel_ignore_lid,
+		"Override lid status (0=autodetect [default], 1=lid open, "
+		"-1=lid closed)");
 
 unsigned int i915_powersave __read_mostly = 1;
 module_param_named(powersave, i915_powersave, int, 0600);
+MODULE_PARM_DESC(powersave,
+		"Enable powersavings, fbc, downclocking, etc. (default: true)");
 
 unsigned int i915_semaphores __read_mostly = 0;
 module_param_named(semaphores, i915_semaphores, int, 0600);
+MODULE_PARM_DESC(semaphores,
+		"Use semaphores for inter-ring sync (default: false)");
 
 unsigned int i915_enable_rc6 __read_mostly = 0;
 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
+MODULE_PARM_DESC(i915_enable_rc6,
+		"Enable power-saving render C-state 6 (default: true)");
 
 unsigned int i915_enable_fbc __read_mostly = 1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
+MODULE_PARM_DESC(i915_enable_fbc,
+		"Enable frame buffer compression for power savings "
+		"(default: false)");
 
 unsigned int i915_lvds_downclock __read_mostly = 0;
 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+MODULE_PARM_DESC(lvds_downclock,
+		"Use panel (LVDS/eDP) downclocking for power savings "
+		"(default: false)");
 
 unsigned int i915_panel_use_ssc __read_mostly = 1;
 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
+MODULE_PARM_DESC(lvds_use_ssc,
+		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
+		"(default: true)");
 
 int i915_vbt_sdvo_panel_type __read_mostly = -1;
 module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
+MODULE_PARM_DESC(vbt_sdvo_panel_type,
+		"Override selection of SDVO panel mode in the VBT "
+		"(default: auto)");
 
 static bool i915_try_reset __read_mostly = true;
 module_param_named(reset, i915_try_reset, bool, 0600);
+MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
 bool i915_enable_hangcheck __read_mostly = true;
 module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+MODULE_PARM_DESC(enable_hangcheck,
+		"Periodically check GPU activity for detecting hangs. "
+		"WARNING: Disabling this can cause system wide hangs. "
+		"(default: true)");
 
 static struct drm_driver driver;
 extern int intel_agp_enabled;
-- 
1.7.6

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-13 21:38 [PATCH 1/2] drm/i915: add module parameter compiler hints Ben Widawsky
2011-07-13 21:38 ` Ben Widawsky [this message]
2011-07-14  8:08   ` [PATCH 2/2] drm/i915: provide module parameter description Chris Wilson
2011-07-14  8:08 ` [PATCH 1/2] drm/i915: add module parameter compiler hints Chris Wilson
  -- strict thread matches above, loose matches on Subject: below --
2011-07-06 22:14 Ben Widawsky
2011-07-06 22:14 ` [PATCH 2/2] drm/i915: provide module parameter description Ben Widawsky
2011-07-07  5:58   ` Chris Wilson
2011-07-07  9:17   ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1310593098-20268-2-git-send-email-ben@bwidawsk.net \
    --to=ben@bwidawsk.net \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git