Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Takashi Iwai <tiwai@suse.de>, Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 09/81] drm/i915/lvds: ditch ->prepare special case
Date: Wed, 11 Jul 2012 16:27:52 +0200
Message-ID: <1342016944-23395-10-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1342016944-23395-1-git-send-email-daniel.vetter@ffwll.ch>

LVDS is the first output where dpms on/off and prepare/commit don't
perfectly match. Now the idea behind this special case seems to be
that for simple resolution changes on the LVDS we don't need to stop
the pipe, because (at least on newer chips) we can adjust the panel
fitter on the fly.

There are a few problems with the current code though:
- We still stop and restart the pipe unconditionally, because the crtc
  helper code isn't flexible enough.
- We show some ugly flickering, especially when changing crtcs (this
  the crtc helper would actually take into account, but we don't
  implement the encoder->get_crtc callback required to make this work
  properly).

So it doesn't even work as advertised. I agree that it would be nice
to do resolution changes on LVDS (and also eDP) whithout blacking the
screen where the panel fitter allows to do that. But imo we should
implement this as a special case a few layers up in the mode set code,
akin to how we already detect simple framebuffer changes (and only
update the required registers with ->mode_set_base).

Until this is all in place, make our lives easier and just rip it out.

Also note that this seems to fix actual bugs with enabling the lvds
output, see:

http://lists.freedesktop.org/archives/intel-gfx/2012-July/018614.html

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Giacomo Comes <comes@naic.edu>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_lvds.c |    8 +-------
 1 files changed, 1 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9b706a5..73d0079 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -409,13 +409,7 @@ static void intel_lvds_prepare(struct drm_encoder *encoder)
 {
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
 
-	/*
-	 * Prior to Ironlake, we must disable the pipe if we want to adjust
-	 * the panel fitter. However at all other times we can just reset
-	 * the registers regardless.
-	 */
-	if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty)
-		intel_lvds_disable(intel_lvds);
+	intel_lvds_disable(intel_lvds);
 }
 
 static void intel_lvds_commit(struct drm_encoder *encoder)
-- 
1.7.7.6

  parent reply index

Thread overview: 107+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-11 14:27 [PATCH 00/81] modeset rework Daniel Vetter
2012-07-11 14:27 ` [PATCH 01/81] drm/i915: add crtc->enable/disable vfuncs insted of dpms Daniel Vetter
2012-07-11 14:27 ` [PATCH 02/81] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-07-12 14:44   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 03/81] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-07-11 14:27 ` [PATCH 04/81] drm/i915: add missing gen2 pipe A quirk entries Daniel Vetter
2012-07-11 14:27 ` [PATCH 05/81] drm/i915: rip out the overlay pipe A workaround Daniel Vetter
2012-07-11 14:27 ` [PATCH 06/81] drm/i915: prepare load-detect pipe code for dpms changes Daniel Vetter
2012-07-11 14:27 ` [PATCH 07/81] drm/i915/hdmi: convert to encoder->disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 08/81] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-07-11 14:27 ` Daniel Vetter [this message]
2012-07-22 14:52   ` [PATCH 09/81] drm/i915/lvds: ditch ->prepare special case Daniel Vetter
2012-07-22 16:32     ` Takashi Iwai
2012-07-22 19:20       ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 10/81] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 11/81] drm/i915/dp: " Daniel Vetter
2012-07-11 14:27 ` [PATCH 12/81] drm/i915: create VLV_DSIPLAY_BASE #define Daniel Vetter
2012-07-20 12:07   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 13/81] drm/i915: group ADPA #defines together Daniel Vetter
2012-07-12 13:06   ` Paulo Zanoni
2012-07-11 14:27 ` [PATCH 14/81] drm/i915: add inte_crt->adpa_reg Daniel Vetter
2012-07-20 11:56   ` Chris Wilson
2012-07-20 12:09   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 15/81] drm/i915/crt: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 16/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 17/81] drm/i915: simplify dvo dpms interface Daniel Vetter
2012-07-11 14:28 ` [PATCH 18/81] drm/i915/dvo: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 19/81] drm/i915: simplify possible_clones computation Daniel Vetter
2012-07-12 18:10   ` Paulo Zanoni
2012-07-12 18:47     ` Daniel Vetter
2012-07-12 18:08       ` [PATCH] " Daniel Vetter
2012-07-12 19:48         ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 20/81] drm/i915: add port parameter to intel_hdmi_init Daniel Vetter
2012-07-12 18:19   ` [PATCH] " Daniel Vetter
2012-07-12 19:49     ` Paulo Zanoni
2012-07-17  8:43       ` Daniel Vetter
2012-07-11 14:28 ` [PATCH 21/81] drm/i915: convert dpms functions of dvo/sdvo/crt Daniel Vetter
2012-07-11 14:28 ` [PATCH 22/81] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-07-11 14:28 ` [PATCH 23/81] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 24/81] drm/fb helper: don't call drm_crtc_helper_set_config Daniel Vetter
2012-07-18 15:49   ` Daniel Vetter
2012-07-18 15:50     ` Daniel Vetter
2012-07-20  1:17       ` Dave Airlie
2012-07-11 14:28 ` [PATCH 25/81] drm: remove the list_head from drm_mode_set Daniel Vetter
2012-07-20  1:23   ` Dave Airlie
2012-07-11 14:28 ` [PATCH 26/81] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 27/81] drm/i915: call set_base directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 28/81] drm/i915: inline intel_best_encoder Daniel Vetter
2012-07-11 14:28 ` [PATCH 29/81] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 30/81] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-07-11 14:28 ` [PATCH 31/81] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 32/81] drm/i915: call crtc functions directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 33/81] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-07-11 14:28 ` [PATCH 34/81] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 35/81] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 36/81] drm/i915/hdmi: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 37/81] drm/i915/tv: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 38/81] drm/i915/lvds: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 39/81] drm/i915/crt: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 40/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 41/81] drm/i915/dvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 42/81] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-07-11 14:28 ` [PATCH 43/81] drm/i915: check connector hw/sw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 44/81] drm/i915: rip out intel_crtc->dpms_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 45/81] drm/i915: rip out intel_dp->dpms_mode Daniel Vetter
2012-07-26 18:06   ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 46/81] drm/i915: ensure the force pipe A quirk is actually followed Daniel Vetter
2012-07-11 14:28 ` [PATCH 47/81] drm/i915: introduce struct intel_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 48/81] drm/i915: extract modeset config save/restore code Daniel Vetter
2012-07-11 14:28 ` [PATCH 49/81] drm/i915: extract intel_set_config_compute_mode_changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 50/81] drm/i915: extract intel_set_config_update_output_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 51/81] drm/i915: implement crtc helper semantics relied upon by the fb helper Daniel Vetter
2012-07-11 14:28 ` [PATCH 52/81] drm/i915: don't update the fb base if there is no fb Daniel Vetter
2012-07-11 14:28 ` [PATCH 53/81] drm/i915: convert pointless error checks in set_config to BUGs Daniel Vetter
2012-07-11 14:28 ` [PATCH 54/81] drm/i915: don't save all the encoder/crtc state in set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 55/81] drm/i915: stage modeset output changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 56/81] drm/i915: push crtc->fb update into pipe_set_base Daniel Vetter
2012-07-11 14:28 ` [PATCH 57/81] drm/i915: remove crtc disabling special case Daniel Vetter
2012-07-11 14:28 ` [PATCH 58/81] drm/i915: move output commit and crtc disabling into set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 59/81] drm/i915: extract adjusted mode computation Daniel Vetter
2012-07-11 14:28 ` [PATCH 60/81] drm/i915: use staged outuput config in tv->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 61/81] drm/i915: use staged outuput config in lvds->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 62/81] drm/i915: compute masks of crtcs affected in set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 63/81] drm/i915: implement new set_mode code flow Daniel Vetter
2012-07-11 14:28 ` [PATCH 64/81] drm/i915: push commit_output_state past crtc disabling Daniel Vetter
2012-07-11 14:28 ` [PATCH 65/81] drm/i915: s/intel_encoder_disable/intel_encoder_noop Daniel Vetter
2012-07-11 14:28 ` [PATCH 66/81] drm/i915: kill a few unused things in dev_priv Daniel Vetter
2012-07-11 14:28 ` [PATCH 67/81] drm/i915: WARN if the pipe won't turn off Daniel Vetter
2012-07-11 14:28 ` [PATCH 68/81] drm/i915: switch the load detect code to the staged modeset config Daniel Vetter
2012-07-11 14:28 ` [PATCH 69/81] drm/i915: push commit_output_state past the crtc/encoder preparing Daniel Vetter
2012-07-11 16:02   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 70/81] drm/i915: disable all crtcs at suspend time Daniel Vetter
2012-07-11 14:28 ` [PATCH 71/81] drm/i915: add tons of modeset state checks Daniel Vetter
2012-07-11 17:46   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 72/81] drm/i915: extract ironlake_fdi_pll_disable Daniel Vetter
2012-07-11 14:28 ` [PATCH 73/81] drm/i915: rip out intel_disable_pch_ports Daniel Vetter
2012-07-11 14:28 ` [PATCH 74/81] drm/i915: don't disable fdi links harder in ilk_crtc_enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 75/81] drm/i915: don't call dpms funcs after set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 76/81] drm/i915: update dpms property in set_mode Daniel Vetter
2012-07-11 14:29 ` [PATCH 77/81] drm/i915: add encoder->pre_enable/post_disable Daniel Vetter
2012-07-11 14:29 ` [PATCH 78/81] drm/i915: clean up the cpu edp pll special case Daniel Vetter
2012-07-11 14:29 ` [PATCH 79/81] drm/i915: robustify edp_pll_on/off Daniel Vetter
2012-07-11 17:47   ` [PATCH] " Daniel Vetter
2012-07-11 14:29 ` [PATCH 80/81] drm/i915: rip out dp port enabling cludges^Wchecks Daniel Vetter
2012-07-11 14:38 ` [PATCH 81/81] drm/i915: disable the cpu edp port after the cpu pipe Daniel Vetter
2012-07-15 13:13 ` [PATCH 00/81] modeset rework Chris Wilson
2012-07-15 14:57   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342016944-23395-10-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git