Intel-GFX Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 21/81] drm/i915: convert dpms functions of dvo/sdvo/crt
Date: Wed, 11 Jul 2012 16:28:04 +0200
Message-ID: <1342016944-23395-22-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1342016944-23395-1-git-send-email-daniel.vetter@ffwll.ch>

Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_crt.c     |   97 +++++++++++++++++----------------
 drivers/gpu/drm/i915/intel_display.c |   37 ++++++-------
 drivers/gpu/drm/i915/intel_drv.h     |    1 +
 drivers/gpu/drm/i915/intel_dvo.c     |   39 ++++++++++----
 drivers/gpu/drm/i915/intel_sdvo.c    |   60 +++++++++------------
 5 files changed, 122 insertions(+), 112 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c3f6680..3cca437 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -84,13 +84,17 @@ static void intel_enable_crt(struct intel_encoder *encoder)
 	I915_WRITE(crt->adpa_reg, temp);
 }
 
-static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
+/* Note: The caller is required to filter out dpms modes not supported by the
+ * platform. */
+static void intel_crtc_set_dpms(struct intel_encoder *encoder, int mode)
 {
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	u32 temp;
 
-	temp = I915_READ(PCH_ADPA);
+	temp = I915_READ(crt->adpa_reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;
 
 	switch (mode) {
@@ -98,44 +102,59 @@ static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
 		temp |= ADPA_DAC_ENABLE;
 		break;
 	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
 	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
 	case DRM_MODE_DPMS_OFF:
-		/* Just leave port enable cleared */
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 		break;
 	}
 
-	I915_WRITE(PCH_ADPA, temp);
+	I915_WRITE(crt->adpa_reg, temp);
 }
 
-static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
+static void intel_crt_dpms(struct drm_connector *connector, int mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 temp;
-
-	temp = I915_READ(ADPA);
-	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp &= ~ADPA_DAC_ENABLE;
+	struct drm_device *dev = connector->dev;
+	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct drm_crtc *crtc;
+	int old_dpms;
 
-	if (IS_VALLEYVIEW(dev) && mode != DRM_MODE_DPMS_ON)
+	/* PCH platforms and VLV only support on/off. */
+	if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
 
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		temp |= ADPA_DAC_ENABLE;
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
-		break;
-	case DRM_MODE_DPMS_SUSPEND:
-		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
-		break;
-	case DRM_MODE_DPMS_OFF:
-		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
-		break;
+	if (mode == connector->dpms)
+		return;
+
+	old_dpms = connector->dpms;
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = encoder->base.crtc;
+	if (!crtc) {
+		encoder->connectors_active = false;
+		return;
 	}
 
-	I915_WRITE(ADPA, temp);
+	/* We need the pipe to run for anything but OFF. */
+	if (mode == DRM_MODE_DPMS_OFF)
+		encoder->connectors_active = false;
+	else
+		encoder->connectors_active = true;
+
+	if (mode < old_dpms) {
+		/* From off to on, enable the pipe first. */
+		intel_crtc_update_dpms(crtc);
+
+		intel_crtc_set_dpms(encoder, mode);
+	} else {
+		intel_crtc_set_dpms(encoder, mode);
+
+		intel_crtc_update_dpms(crtc);
+	}
 }
 
 static int intel_crt_mode_valid(struct drm_connector *connector,
@@ -603,27 +622,17 @@ static void intel_crt_reset(struct drm_connector *connector)
  * Routines for controlling stuff on the analog port
  */
 
-static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
-	.prepare = intel_encoder_noop,
-	.commit = intel_encoder_noop,
-	.mode_set = intel_crt_mode_set,
-	.dpms = pch_crt_dpms,
-	.disable = intel_encoder_disable,
-};
-
-static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
+static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
 	.mode_fixup = intel_crt_mode_fixup,
 	.prepare = intel_encoder_noop,
 	.commit = intel_encoder_noop,
 	.mode_set = intel_crt_mode_set,
-	.dpms = gmch_crt_dpms,
 	.disable = intel_encoder_disable,
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 	.reset = intel_crt_reset,
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_crt_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
@@ -664,7 +673,6 @@ void intel_crt_init(struct drm_device *dev)
 	struct intel_crt *crt;
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	const struct drm_encoder_helper_funcs *encoder_helper_funcs;
 
 	/* Skip machines without VGA that falsely report hotplug events */
 	if (dmi_check_system(intel_no_crt))
@@ -703,11 +711,6 @@ void intel_crt_init(struct drm_device *dev)
 	connector->doublescan_allowed = 0;
 
 	if (HAS_PCH_SPLIT(dev))
-		encoder_helper_funcs = &pch_encoder_funcs;
-	else
-		encoder_helper_funcs = &gmch_encoder_funcs;
-
-	if (HAS_PCH_SPLIT(dev))
 		crt->adpa_reg = PCH_ADPA;
 	else if (IS_VALLEYVIEW(dev))
 		crt->adpa_reg = VLV_ADPA;
@@ -717,7 +720,7 @@ void intel_crt_init(struct drm_device *dev)
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
 
-	drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
+	drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3769e5f..eb3b7ab 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3450,34 +3450,31 @@ static void i9xx_crtc_off(struct drm_crtc *crtc)
 /**
  * Sets the power management mode of the pipe and plane.
  */
-static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+void intel_crtc_update_dpms(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *intel_encoder;
 	int pipe = intel_crtc->pipe;
-	bool enabled;
+	bool enabled, enable = false;
+	int mode;
+
+	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
+		enable |= intel_encoder->connectors_active;
+
+	mode = enable ? DRM_MODE_DPMS_ON : DRM_MODE_DPMS_OFF;
 
 	if (intel_crtc->dpms_mode == mode)
 		return;
 
 	intel_crtc->dpms_mode = mode;
 
-	/* XXX: When our outputs are all unaware of DPMS modes other than off
-	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
-	 */
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-	case DRM_MODE_DPMS_STANDBY:
-	case DRM_MODE_DPMS_SUSPEND:
+	if (enable)
 		dev_priv->display.crtc_enable(crtc);
-		break;
-
-	case DRM_MODE_DPMS_OFF:
+	else
 		dev_priv->display.crtc_disable(crtc);
-		break;
-	}
 
 	if (!dev->primary->master)
 		return;
@@ -3486,7 +3483,7 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 	if (!master_priv->sarea_priv)
 		return;
 
-	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+	enabled = crtc->enabled && enable;
 
 	switch (pipe) {
 	case 0:
@@ -3505,11 +3502,12 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 static void intel_crtc_disable(struct drm_crtc *crtc)
 {
-	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+	/* crtc->disable is only called when we have no encoders, hence this
+	 * will disable the pipe. */
+	intel_crtc_update_dpms(crtc);
 	dev_priv->display.off(crtc);
 
 	assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
@@ -3569,11 +3567,11 @@ void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
 	if (mode == DRM_MODE_DPMS_ON) {
 		encoder->connectors_active = true;
 
-		intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_ON);
+		intel_crtc_update_dpms(encoder->base.crtc);
 	} else {
 		encoder->connectors_active = false;
 
-		intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_OFF);
+		intel_crtc_update_dpms(encoder->base.crtc);
 	}
 }
 
@@ -6609,7 +6607,6 @@ static void intel_crtc_reset(struct drm_crtc *crtc)
 }
 
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
-	.dpms = intel_crtc_dpms,
 	.mode_fixup = intel_crtc_mode_fixup,
 	.mode_set = intel_crtc_mode_set,
 	.mode_set_base = intel_pipe_set_base,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 488b897..d6f3d25 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -379,6 +379,7 @@ extern void intel_panel_destroy_backlight(struct drm_device *dev);
 extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
+extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
 extern void intel_encoder_prepare(struct drm_encoder *encoder);
 extern void intel_encoder_commit(struct drm_encoder *encoder);
 extern void intel_encoder_noop(struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 86a3d2b..8a188f4 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -121,21 +121,39 @@ static void intel_enable_dvo(struct intel_encoder *encoder)
 	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 }
 
-static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
+static void intel_dvo_dpms(struct drm_connector *connector, int mode)
 {
-	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
-	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
-	u32 dvo_reg = intel_dvo->dev.dvo_reg;
-	u32 temp = I915_READ(dvo_reg);
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	struct drm_crtc *crtc;
+
+	/* dvo supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = intel_dvo->base.base.crtc;
+	if (!crtc) {
+		intel_dvo->base.connectors_active = false;
+		return;
+	}
 
 	if (mode == DRM_MODE_DPMS_ON) {
-		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
-		I915_READ(dvo_reg);
+		intel_dvo->base.connectors_active = true;
+
+		intel_crtc_update_dpms(crtc);
+
 		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 	} else {
 		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
-		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
-		I915_READ(dvo_reg);
+
+		intel_dvo->base.connectors_active = false;
+
+		intel_crtc_update_dpms(crtc);
 	}
 }
 
@@ -291,7 +309,6 @@ static void intel_dvo_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
-	.dpms = intel_dvo_dpms,
 	.mode_fixup = intel_dvo_mode_fixup,
 	.prepare = intel_encoder_noop,
 	.mode_set = intel_dvo_mode_set,
@@ -300,7 +317,7 @@ static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_dvo_dpms,
 	.detect = intel_dvo_detect,
 	.destroy = intel_dvo_destroy,
 	.fill_modes = drm_helper_probe_single_connector_modes,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 5fe044c..284513b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1189,51 +1189,44 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
 	intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 }
 
-static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+static void intel_sdvo_dpms(struct drm_connector *connector, int mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 temp;
+	struct drm_crtc *crtc;
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+
+	/* dvo supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	crtc = intel_sdvo->base.base.crtc;
+	if (!crtc) {
+		intel_sdvo->base.connectors_active = false;
+		return;
+	}
 
 	if (mode != DRM_MODE_DPMS_ON) {
 		intel_sdvo_set_active_outputs(intel_sdvo, 0);
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 
-		if (mode == DRM_MODE_DPMS_OFF) {
-			temp = I915_READ(intel_sdvo->sdvo_reg);
-			if ((temp & SDVO_ENABLE) != 0) {
-				intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
-			}
-		}
+		intel_sdvo->base.connectors_active = false;
+
+		intel_crtc_update_dpms(crtc);
 	} else {
-		bool input1, input2;
-		int i;
-		u8 status;
-
-		temp = I915_READ(intel_sdvo->sdvo_reg);
-		if ((temp & SDVO_ENABLE) == 0)
-			intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
-		for (i = 0; i < 2; i++)
-			intel_wait_for_vblank(dev, intel_crtc->pipe);
-
-		status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
-		/* Warn if the device reported failure to sync.
-		 * A lot of SDVO devices fail to notify of sync, but it's
-		 * a given it the status is a success, we succeeded.
-		 */
-		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
-			DRM_DEBUG_KMS("First %s output reported failure to "
-					"sync\n", SDVO_NAME(intel_sdvo));
-		}
+		intel_sdvo->base.connectors_active = true;
+
+		intel_crtc_update_dpms(crtc);
 
 		if (0)
 			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 		intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 	}
-	return;
 }
 
 static int intel_sdvo_mode_valid(struct drm_connector *connector,
@@ -1892,7 +1885,6 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-	.dpms = intel_sdvo_dpms,
 	.mode_fixup = intel_sdvo_mode_fixup,
 	.prepare = intel_encoder_noop,
 	.mode_set = intel_sdvo_mode_set,
@@ -1901,7 +1893,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_sdvo_dpms,
 	.detect = intel_sdvo_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_sdvo_set_property,
-- 
1.7.7.6

  parent reply index

Thread overview: 107+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-11 14:27 [PATCH 00/81] modeset rework Daniel Vetter
2012-07-11 14:27 ` [PATCH 01/81] drm/i915: add crtc->enable/disable vfuncs insted of dpms Daniel Vetter
2012-07-11 14:27 ` [PATCH 02/81] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-07-12 14:44   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 03/81] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-07-11 14:27 ` [PATCH 04/81] drm/i915: add missing gen2 pipe A quirk entries Daniel Vetter
2012-07-11 14:27 ` [PATCH 05/81] drm/i915: rip out the overlay pipe A workaround Daniel Vetter
2012-07-11 14:27 ` [PATCH 06/81] drm/i915: prepare load-detect pipe code for dpms changes Daniel Vetter
2012-07-11 14:27 ` [PATCH 07/81] drm/i915/hdmi: convert to encoder->disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 08/81] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-07-11 14:27 ` [PATCH 09/81] drm/i915/lvds: ditch ->prepare special case Daniel Vetter
2012-07-22 14:52   ` Daniel Vetter
2012-07-22 16:32     ` Takashi Iwai
2012-07-22 19:20       ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 10/81] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 11/81] drm/i915/dp: " Daniel Vetter
2012-07-11 14:27 ` [PATCH 12/81] drm/i915: create VLV_DSIPLAY_BASE #define Daniel Vetter
2012-07-20 12:07   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 13/81] drm/i915: group ADPA #defines together Daniel Vetter
2012-07-12 13:06   ` Paulo Zanoni
2012-07-11 14:27 ` [PATCH 14/81] drm/i915: add inte_crt->adpa_reg Daniel Vetter
2012-07-20 11:56   ` Chris Wilson
2012-07-20 12:09   ` Daniel Vetter
2012-07-11 14:27 ` [PATCH 15/81] drm/i915/crt: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:27 ` [PATCH 16/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 17/81] drm/i915: simplify dvo dpms interface Daniel Vetter
2012-07-11 14:28 ` [PATCH 18/81] drm/i915/dvo: convert to encoder disable/enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 19/81] drm/i915: simplify possible_clones computation Daniel Vetter
2012-07-12 18:10   ` Paulo Zanoni
2012-07-12 18:47     ` Daniel Vetter
2012-07-12 18:08       ` [PATCH] " Daniel Vetter
2012-07-12 19:48         ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 20/81] drm/i915: add port parameter to intel_hdmi_init Daniel Vetter
2012-07-12 18:19   ` [PATCH] " Daniel Vetter
2012-07-12 19:49     ` Paulo Zanoni
2012-07-17  8:43       ` Daniel Vetter
2012-07-11 14:28 ` Daniel Vetter [this message]
2012-07-11 14:28 ` [PATCH 22/81] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-07-11 14:28 ` [PATCH 23/81] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 24/81] drm/fb helper: don't call drm_crtc_helper_set_config Daniel Vetter
2012-07-18 15:49   ` Daniel Vetter
2012-07-18 15:50     ` Daniel Vetter
2012-07-20  1:17       ` Dave Airlie
2012-07-11 14:28 ` [PATCH 25/81] drm: remove the list_head from drm_mode_set Daniel Vetter
2012-07-20  1:23   ` Dave Airlie
2012-07-11 14:28 ` [PATCH 26/81] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 27/81] drm/i915: call set_base directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 28/81] drm/i915: inline intel_best_encoder Daniel Vetter
2012-07-11 14:28 ` [PATCH 29/81] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 30/81] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-07-11 14:28 ` [PATCH 31/81] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-07-11 14:28 ` [PATCH 32/81] drm/i915: call crtc functions directly Daniel Vetter
2012-07-11 14:28 ` [PATCH 33/81] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-07-11 14:28 ` [PATCH 34/81] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 35/81] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 36/81] drm/i915/hdmi: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 37/81] drm/i915/tv: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 38/81] drm/i915/lvds: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 39/81] drm/i915/crt: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 40/81] drm/i915/sdvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 41/81] drm/i915/dvo: " Daniel Vetter
2012-07-11 14:28 ` [PATCH 42/81] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-07-11 14:28 ` [PATCH 43/81] drm/i915: check connector hw/sw state Daniel Vetter
2012-07-11 14:28 ` [PATCH 44/81] drm/i915: rip out intel_crtc->dpms_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 45/81] drm/i915: rip out intel_dp->dpms_mode Daniel Vetter
2012-07-26 18:06   ` Paulo Zanoni
2012-07-11 14:28 ` [PATCH 46/81] drm/i915: ensure the force pipe A quirk is actually followed Daniel Vetter
2012-07-11 14:28 ` [PATCH 47/81] drm/i915: introduce struct intel_set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 48/81] drm/i915: extract modeset config save/restore code Daniel Vetter
2012-07-11 14:28 ` [PATCH 49/81] drm/i915: extract intel_set_config_compute_mode_changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 50/81] drm/i915: extract intel_set_config_update_output_state Daniel Vetter
2012-07-11 14:28 ` [PATCH 51/81] drm/i915: implement crtc helper semantics relied upon by the fb helper Daniel Vetter
2012-07-11 14:28 ` [PATCH 52/81] drm/i915: don't update the fb base if there is no fb Daniel Vetter
2012-07-11 14:28 ` [PATCH 53/81] drm/i915: convert pointless error checks in set_config to BUGs Daniel Vetter
2012-07-11 14:28 ` [PATCH 54/81] drm/i915: don't save all the encoder/crtc state in set_config Daniel Vetter
2012-07-11 14:28 ` [PATCH 55/81] drm/i915: stage modeset output changes Daniel Vetter
2012-07-11 14:28 ` [PATCH 56/81] drm/i915: push crtc->fb update into pipe_set_base Daniel Vetter
2012-07-11 14:28 ` [PATCH 57/81] drm/i915: remove crtc disabling special case Daniel Vetter
2012-07-11 14:28 ` [PATCH 58/81] drm/i915: move output commit and crtc disabling into set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 59/81] drm/i915: extract adjusted mode computation Daniel Vetter
2012-07-11 14:28 ` [PATCH 60/81] drm/i915: use staged outuput config in tv->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 61/81] drm/i915: use staged outuput config in lvds->mode_fixup Daniel Vetter
2012-07-11 14:28 ` [PATCH 62/81] drm/i915: compute masks of crtcs affected in set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 63/81] drm/i915: implement new set_mode code flow Daniel Vetter
2012-07-11 14:28 ` [PATCH 64/81] drm/i915: push commit_output_state past crtc disabling Daniel Vetter
2012-07-11 14:28 ` [PATCH 65/81] drm/i915: s/intel_encoder_disable/intel_encoder_noop Daniel Vetter
2012-07-11 14:28 ` [PATCH 66/81] drm/i915: kill a few unused things in dev_priv Daniel Vetter
2012-07-11 14:28 ` [PATCH 67/81] drm/i915: WARN if the pipe won't turn off Daniel Vetter
2012-07-11 14:28 ` [PATCH 68/81] drm/i915: switch the load detect code to the staged modeset config Daniel Vetter
2012-07-11 14:28 ` [PATCH 69/81] drm/i915: push commit_output_state past the crtc/encoder preparing Daniel Vetter
2012-07-11 16:02   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 70/81] drm/i915: disable all crtcs at suspend time Daniel Vetter
2012-07-11 14:28 ` [PATCH 71/81] drm/i915: add tons of modeset state checks Daniel Vetter
2012-07-11 17:46   ` [PATCH] " Daniel Vetter
2012-07-11 14:28 ` [PATCH 72/81] drm/i915: extract ironlake_fdi_pll_disable Daniel Vetter
2012-07-11 14:28 ` [PATCH 73/81] drm/i915: rip out intel_disable_pch_ports Daniel Vetter
2012-07-11 14:28 ` [PATCH 74/81] drm/i915: don't disable fdi links harder in ilk_crtc_enable Daniel Vetter
2012-07-11 14:28 ` [PATCH 75/81] drm/i915: don't call dpms funcs after set_mode Daniel Vetter
2012-07-11 14:28 ` [PATCH 76/81] drm/i915: update dpms property in set_mode Daniel Vetter
2012-07-11 14:29 ` [PATCH 77/81] drm/i915: add encoder->pre_enable/post_disable Daniel Vetter
2012-07-11 14:29 ` [PATCH 78/81] drm/i915: clean up the cpu edp pll special case Daniel Vetter
2012-07-11 14:29 ` [PATCH 79/81] drm/i915: robustify edp_pll_on/off Daniel Vetter
2012-07-11 17:47   ` [PATCH] " Daniel Vetter
2012-07-11 14:29 ` [PATCH 80/81] drm/i915: rip out dp port enabling cludges^Wchecks Daniel Vetter
2012-07-11 14:38 ` [PATCH 81/81] drm/i915: disable the cpu edp port after the cpu pipe Daniel Vetter
2012-07-15 13:13 ` [PATCH 00/81] modeset rework Chris Wilson
2012-07-15 14:57   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342016944-23395-22-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Intel-GFX Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/intel-gfx/0 intel-gfx/git/0.git
	git clone --mirror https://lore.kernel.org/intel-gfx/1 intel-gfx/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 intel-gfx intel-gfx/ https://lore.kernel.org/intel-gfx \
		intel-gfx@lists.freedesktop.org
	public-inbox-index intel-gfx

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.intel-gfx


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git